Sensor - Ultrasonic, Distance & IR

Product Details:

DESCRIPTION

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version

Features

Typical output current under test: IC = 1 mA
Daylight blocking filter
Emitter wavelength: 950 nm
Lead (Pb)-free soldering released
Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC

Applications

Position sensor for shaft encoder
Detection of reflective material such as paper, IBM cards, magnetic tapes etc.
Limit switch for mechanical motions in VCR
General purpose - wherever the space is limited DESCRIPTION

Product Details:

Transmitter and receiver in one photoelectric sensor. The sensor has an adjustable detection distance and visible light interference. It is easy to use and is ideal for panel mounting.

Effective distance: Adjustable from 3-80CM

Product Details:

This Infrared Obstacle Avoidance Sensor Module is an inexpensive solution to avoidance detection for robotics and other electronics uses.
It comes as an assembled module, as shown above, there are only four pins: +5-volts, GND, output, and EN. Output is an active LOW and has an onboard status LED. It’s very easy to interface directly with Arduino or other micro-controllers. It also works with the Raspberry Pi with a voltage range of 3-6 volts. Connect Vcc to 3-volts!
The enable pin “EN” will disable the device when HI (Vcc) and enable when LO (GND). The onboard jumper can be left open to allow external control of enable/disable of the module. I see no use for this function and would leave the jumper on and the pin disconnected. There are two potentiometers on the module one controlling operating frequency (centred at 38 kHz) the other controlling intensity. The detector was designed for 38 kHz and the onboard oscillator circuit is based on a 555 timer. Tweaking gives a little better range but I’d suggest leaving it alone because the useful range is narrow. It worked well as is. The maximum reliable range in my test was around 30-40 cm and depended on the type of material. A smooth white surface worked far better than a black or rough surface. 
Working voltage - DC 3.3V – 5V. Working current - More than 20mA. Working temperature - -10 to 50 centigrade degree. Detection distance - 2 – 40cm. IO interface - 4 line (- / + / S / EN). Output signal - TTL Level. Adjusting mode - Multi-resistance regulation. Effective angle - 35 degree. Weight (gm) - 5.

Product Details:

Electrical properties
Electrical parameters: JSN-SR04T Operating voltage: DC 5V Quiescent current: 5mA Total current work: 30mA Acoustic emission frequency: 40khz Farthest distance: 4.5m Blind: 25cm Wiring: + 5V (positive power supply) Trig (control side) RX Echo (the receiver) TX GND (negative) Module size: 41mm * 28.5mm Resolution: about 0.5cm Angle: less than 50 degrees Working temperature: -10 ~ 70 ??? Storage temperature: -20 ~ 80 ???
Product Features
1, Small size, easy to use; 2, Low voltage, low power consumption; 3, High accuracy; 4, Strong anti-jamming; 5, Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions.
Application
1, Horizontal distance; 2, obstacle avoidance, automatic control; 3, the object approaches, there is a perceived 4, traffic control; 5, security, industrial control; 6, artificial intelligence, and research
Working principle
(1) using IO port TRIG trigger location, to the high level signal of at least 10us;(2) module automatically sends 8 40KHz Fang Bo, automatic detecting whether a signal return;(3) a signal return, a high level is output through the IO port ECHO, the time duration of the high level is ultrasonic from launch to return. The test distance = (high level time * speed of sound (340M/S)) /2;This module uses the simple method, a control port with a 10US above high level, can wait for high level output at the receiving port. An output can drive the timer, when this port is low can read the timer value, this time for the location of the time, can be calculated distance. So constantly cycle test, that can achieve the measurement of the value of your mobile.

Product Details:

Features:

• Support for AVRDude
• Allows you to read or write the microcontroller EEPROM,firmware, fuse bits and lock bits
• Support for Linux, Mac OS X and Windows XP,7,8
• 5 KB/sec maximum write speed
• Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
• 10 pin ISP interface

Supported microcontrollers include:

Mega Series

• ATmega8 ATmega48 ATmega88 ATmega168 ATmega328
• ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16
• ATmega161 ATmega162 ATmega163 ATmega164 ATmega169
• ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329
• ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649
• ATmega6490 ATmega8515 ATmega8535

Tiny Series

• ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26
• ATtiny45 ATtiny85 ATtiny2313

Classic Series

• AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414
• AT90S4433 AT90S4434 AT90S8515
• AT90S8535

CAN Series

• AT90CAN128
• PWM Series
• AT90PWM2 AT90PWM3Features:

Product Details:

This SN04-N NPN NO 5mm Distance Detector Proximity Sensor Switch Module will detect the presence of a metallic object within 4mm of the surface of the sensor.The detection distance may vary slightly depending on the shape, size, and type of metal the object is made of. It can detect through thin, non-metallic materials and has an LED indicator that turns on when the device is powered and increases in brightness when an object is detected.Wire Connections:1. Brown wire: 10 ~ 30 VDC (+Ve).2. Blue wire: 0 V (GND).3. Black wire: signal.Note: This product is available in two colors as Green and Blue, which are shipped randomly to our customers. ________________________________________Features :1. Red LED checks the state of the proximity sensor2. High repeated positioning accuracy3. High switching frequency4. Wide voltage range5. Antivibration, dust, water and oil prevention6. Reverse power protection, short circuit protection, directly connecting with PLC7. It can replace small switches and limit switches.________________________________________Package Includes :1 x SN04-N NPN NO 5mm Distance Detector Proximity Sensor Switch Module

Product Details:

Description :
LJ12A3-4-Z/BY PNP DC6-36V Inductive Proximity Sensor Detection Switch
Features :
Proximity switches, also known as non-contact proximity switch, is the ideal electronic switch sensor.When the metal detecting near-proximity switch sensing area.Switches can be non-contact, no pressure, no spark, quickly issued electrical command.Accurately reflect the position and stroke movement mechanism.Positioning accuracy, operating frequency, service life.Easy to install and suitable for harsh environments the ability to adjust.General mechanical limit switch can not be compared.

Additional Information:

• Item Code: LJ12A34ZBYP

Product Details:

Distance Measuring Sensor Unit Measuring distance: 100 to 550 cm Analog output type
For Datasheet refer to link below - 
 


 Description GP2Y0A710K0F is a distance measuring sensor unit, composed of an integrated combination of PSD (position sensitive detector) , IRED (infrared emitting diode) and signal processing circuit. The variety of the reflectivity of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method. This device outputs the voltage corresponding to the detection distance. So this sensor can also be used as a proximity sensor.
 Features 1. Long distance type Distance measuring range : 100 to 550 cm 2. Analog output type 3. Package size : 58×17.6×22.5 mm 4. Consumption current : Typ. 30 mA 5. Supply voltage : 4.5 to 5.5 V
 Agency approvals/Compliance 1. Compliant with RoHS directive(2002/95/EC)
 Applications 1. Projector (for auto focus) 2. Robot cleaner 3. Auto-switch for illumination, etc. 4. Human body detector 5. Amusement equipment (Robot, Arcade game machine)

Product Details:

DescriptionGP2Y0A41SK0F is a distance measuring sensor unit,composed of an integrated combination of PSD(position sensitive detector) , IR-LED (infraredemitting diode) and signal processing circuit.The variety of the reflectivity of the object, theenvironmental temperature and the operating durationare not influenced easily to the distance detectionbecause of adopting the triangulation method.This device outputs the voltage corresponding to thedetection distance. So this sensor can also be used as aproximity sensor.
Features1. Distance measuring sensor is united with PSD, infrared LED and signal processing circuit2. Short measuring cycle (16.5ms)3. Distance measuring range : 4 to 30 cm4. Package size (29.5 × 13.0 × 13.5mm)5. Analog output type
Applications1. Cleaning robot2. Personal robot3. Sanitary
 Compliant with RoHS directive (2002/95/EC)

Product Details:

Features

• Stable performance
• Measure the distance accurately
• Precision: Blind (2cm) super close
• Parameters
• High: up to 0.3cm
• Connection mode: VCC, trig (control side), echo (receiving end), GND

Additional Information:

• Item Code: HC-SR-04

Product Details:

Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor 10-12cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output