Bombay Electronics
Bombay Electronics
Grant Road, Mumbai, Maharashtra
GST No. 27AABPC5348L1ZO
TrustSEAL Verified
Call 0804807645882% Response Rate
SEND EMAIL

Drone Parts

Leading Manufacturer of a2212 brushless motor bldc for quadcopter - 1000, 1400, 1800, 2200 kv, propellers for multi rotor aerial bot, flysky fs-i6 2.4g 6ch ppm rc transmitter with fs-ia6b receiver, imax b6-ac lipo nimh battery charger, quadcopter f450 frame and imax b3 lipo battery charger from Mumbai.

A2212 Brushless Motor BLDC for Quadcopter - 1000, 1400, 1800, 2200 KV

A2212 Brushless Motor BLDC for Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC for Quadcopter - 1000, 1400, 1800, 2200 KV
Get Best Quote
Approx. Price: Rs 350 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Voltage12 V
Model Name/NumberQP1
Usage/ApplicationOutdoor
ColorMulticolor
ModelA2212
Weight38 grams
Speed ( Variant )1100 , 1400 , 1800 , 2200 KV

A2212 BLDC Motor for Quadcopter available in below KV - 
1) 1000KV 
2) 1400KV
3) 1800KV
4) 2200KV
Request
Callback
Yes! I am Interested

Propellers For Multi Rotor Aerial Bot

Propellers For Multi Rotor Aerial Bot
  • Propellers For Multi Rotor Aerial Bot
Get Best Quote
Approx. Price: Rs 45 / pairGet Latest Price

Product Details:

Minimum Order Quantity1 pair
MaterialPlastic
Size5045,6045,7045,8045,1045,1245
Blade size5 , 6 , 7 , 8 , 9 , 10 & 12 inches
ColorBlack , red , white , etc.
Number of blades2
Pitch4.5 inches

The pack includes two propeller blades with adapters (1 CW and 1 CCW), similar to the photo displayed (color might be different)

Description -

The propeller(s) are avalilable in the following sizes :
  • 5 x 4.5 aka 5045 + 5045R
  • 6 x 4.5 aka 6045 + 6045R
  • 7 x 4.5 aka 7045 + 7045R
  • 8 x 4.5 aka 8045 + 8045R
  • 9 x 4.5 aka 9045 + 9045R
  • 10 x 4.5 aka 1045 + 1045R
  • 12 x 4.5 aka 1245 + 1245R

Set of counter rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters. You receive 2 propellers: one propeler rotates clockwise ( CW ) and the other propeler rotates counter clockwise ( CCW ) (1 left hand 1 right hand rotation). These matched rotor blades are a hard to find matched counter rotating pair.

for Eg.
in a 10 x 4.5 aka 1045 + 1045R set the length is 10 inches and the pitch is 4.5 inches per revolution.
Request
Callback
Yes! I am Interested

FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver

FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
Get Best Quote
Approx. Price: Rs 4,000 / PieceGet Latest Price

Product Details:

Model Name/NumberFLYSKY FSi6
Modes6 channel
MaterialPlastic
Usage/ApplicationOutdoor
ColorBlack
Controlling Range1000m un-obstructed

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. This is a great entry-level radio for those just starting in the field of drones flying due to the ease of use of this product and an impressive list of features for a first-time radio. FlySky FS-i6 2.4G 6CH PPM RC Transmitter is a 6-channel telemetry 2.4GHz transmitter that uses the reliable Automatic Hopping Digital System (AFHDS) and includes such features as digital trims, backlit LCD screen, and simple programming.

On top of this, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400g and so won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch as well as two adjustable knobs for flight modes/ multiple flap positions.

You also get the new FS-iA6B receiver with this kit. This is a compact 6-channel receiver with a range exceeding 500m and it comes with a dual antenna for excellent reception and interference rejection capabilities.  Each transmitter has a unique ID and so when binding, the receiver remembers this ID and accepts data from that transmitter only. This avoids picking up other transmitter signals and dramatically decreases inference and increases safety.

Specifications and Features :Features:
  1. Entry-level 6 channel 2.4GHz radio with telemetry capability.
  2. Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches.
  3. Easy to use Programming & Navigation Buttons.
  4. Supports Heli/Standard Wing/Elevon/V-Tail.
  5. 20 Model Memory.
  6. 8 Character Model Name.
  7. Trainer and charging ports.
  8. The backlit LCD screen displays real-time transmitter and receiver voltage.
  9. 4 Stick Mode Selectable.
  10. Mode 2.
  11. It comes with a receiver.
Request
Callback
Yes! I am Interested

IMAX B6-AC Lipo NiMH Battery Charger

IMAX B6-AC Lipo NiMH Battery Charger
  • IMAX B6-AC Lipo NiMH Battery Charger
Get Best Quote
Approx. Price: Rs 1,950 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Battery Voltage2 ~ 20V
AC Input Voltage100 ~ 240V - 12V DC
InputMax Charge50WMax Discharge 5WCharge
Current Range0.1 ~ 6.0ADischarge
Discharge Current Range0.1 ~ 1.0ANi-MH / NiCd Cells 1 ~ 15Li-ion / LiPoly Cells 1 ~ 6Pb
Weight632g
Dimensions135 x 144 x 36mm

The latest version of the popular IMAX B6AC has arrived and now boasts some unique new features. The latest V2 Model now offers PC connectivity which allows the user to control the charger via your home computer and upgrade the firmware as and when necessary.The B6AC V2 now gives you the ability to adjust the terminal voltage, which makes the charger the perfect charging solution for heavy duty batteries.
The B6AC V2 can also be used as a Lithium battery meter / internal resistance meter and boasts additional functions which include, automatic charging current limit, capacity limit and processing time limit, making the B6AC V2 one of the safest chargers available today.
Features:• PC connectivity• Microprocessor controlled• Delta-peak sensitivity• Individual cell balancing• Li-ion, LiPo and LiFe capable• Ni-Cd and NiMH capable• Large range of charge currents and automatic charge current limit• Store function, allows safe storage current• Time limit function• Input voltage monitoring (Protects car batteries at the field)• Data storage (5 pack memory)• Battery break in and cycling.• Terminal voltage adjustment for heavy duty batteries
Package Includes: 1 x IMAX B6AC V2 Charger1 x DC Jack plug to crocodile clips1 x male
T connector charge lead to 4mm banana plugs 1 x XT60 charge lead 1 x JST charge lead1 x Crocodile clip charge lead1 x Futaba style charge lead1 x Mains power lead (US type)
Request
Callback


Additional Information:

  • Item Code: IMAXB6AC
Yes! I am Interested

QuadCopter F450 frame

QuadCopter F450 frame
  • QuadCopter F450 frame
Get Best Quote
Approx. Price: Rs 700 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
BrandRobodo
MaterialCarbon Fiber
Model Name/NumberQP16
Dimension450mm
Usage/ApplicationOutdoor
Size ( Variant )Q450 & Q550

This is a well thought out quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon.Leveraging upon our skilled and accomplished personnel, we are voluntarily engaged in manufacturing, supplying and trading a best grade range of Quad Copter Frame in the national market. These products are sternly checked by our quality analyzers on various parameters to make sure their defect free delivery at customers end. Along with this, these products are available at very cost effective prices.


Features:


  • Built from quality glass fiber and polyamide nylon.
  • Integrated PCB connections for direct soldering of your ESCs
  • Pre-threaded brass sleeves for all of the frame bolts.
  • Colored arms for orientation to keep you flying in the right direction.
  • Large mounting tabs on main frame bottom plate for easy camera mounting.
  • Easy assembly.


Specifications:

  • Height: 55mm
  • Weight: 270g (w/out electronics)
  • Motor Mount Bolt Holes: 16/19mm
Request
Callback
Yes! I am Interested

IMAX B3 LIPO Battery Charger

IMAX B3 LIPO Battery Charger
  • IMAX B3 LIPO Battery Charger
Get Best Quote
Approx. Price: Rs 350 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Input VoltageAC 110V-240V
Weight180g
Dimension90mm-55mm-35mm
Balance charge current850mA
DisplayGreen & Red LED
CasePlastic

LIPO battery fast charging with wide AC input. An internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA per cell. Double color LED can display the process of charging (RED: charging; GREEN: full). This

charger is compact and light; especially there is separated corresponding balance port for each battery pack.



Request
Callback
Yes! I am Interested

APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A

APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
  • APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
Get Best Quote
Approx. Price: Rs 450 / PieceGet Latest Price

Product Details:

MaterialGlass Fiber
Usage/ApplicationDrones
Current3A
Input Voltage5V
BrandRobodo
Country of OriginMade in India

The APM 2.5.2/2.6/2.8 Pixhawk Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from 2S-6S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection. Note: The Power Module is only designed to power APM, an RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power the servos. Use your aircraft’s own ESC/BEC for that. 
Features : Voltage and current measurement configured for 5V ADC. Switching regulator outputs 5.3V and 3A max. 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector. Supports from 2 cell to 6 cell battery. Package Includes : 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.
Request
Callback
Yes! I am Interested

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
Get Best Quote
Approx. Price: Rs 2,400 / PieceGet Latest Price

Product Details:

BrandFLYSKY
MaterialPlastic
Model Name/NumberQP23
Usage/ApplicationOutdoor
ColorBlack
Controlling Range1000 meters un-obstructed

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multicopters that require the 6ch operation.

This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a computer.

Features : 

  1. Super active and passive anti-jamming capabilities.
  2. Very low power consumption.
  3. High receiving sensitivity.
  4. 8 model memory, digital control.
  5. Can be programmed by PC with included software.
  6. Full range 2.4GHz 6-channel radio.
  7. 4-Model
  8. 4 Types (Airplane, Heli90, Heli120, Heli140).
  9. Integrated
  10. Contrast Adjustment.
  11. Throttle cut.
  12. Computer
  13. USB Socket.
  14. Use a linear spread of fine paragraph by excess antenna.
  15. It covers the entire band width of he antenna bandwidth range.
  16. High quality and stability.

Package Includes :

1 x FS-CT6B Transmitter

1 x FS-r6B Receiver

1 x USB Interface Cable

1 x Software CD

1 x Receiver Binding Cable

 

1 x User Manual

Request
Callback
Yes! I am Interested

Electronic Speed Controller ( ESC )

Electronic Speed Controller ( ESC )
  • Electronic Speed Controller ( ESC )
Get Best Quote
Approx. Price: Rs 400 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberQP6
Power30A
MaterialGlass Fiber
Usage/ApplicationOutdoor
Controlling Range1v to 12V
OutPut Current30 A

Electronic Speed Controller (ESC) 30A is a electronic circuit to vary the speed, direction and possible to act as a dynamic brake, of a Brushless Motor. This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv).

 

Keeping our harmonization with the market defined quality parameters; we are widely reckoned for providing a flawless array of Electronic Speed Controller ESC 30A to our respected clients. Our offered speed controllers are highly known in electronic industries for controlling the speed. Apart from this, we ensure to deliver these products within stipulated time frame.


Features:

  • Dimensional Accuracy
  • Fine finish
  • Affordable
Request
Callback
Yes! I am Interested

3DR Single TTL MINI Radio Telemetry 433MHz 250mW for PIXHAWK and APM

3DR Single TTL MINI Radio Telemetry 433MHz 250mW for PIXHAWK and APM
  • 3DR Single TTL MINI Radio Telemetry 433MHz 250mW for PIXHAWK and APM
Get Best Quote
Approx. Price: Rs 1,800 / PieceGet Latest Price

Product Details:

MaterialPlastic
Usage/ApplicationOutdoor
WeightLight weight (under 4 grams without antenna)
Frequency band433Mhz
Receiver sensitivity-117 dBm
Transmit powerup to 20dBm (100mW)
Air data ratesup to 250kbps
Rangeapprox 1 mile with supplied antennas

This Telemetry radio set allows you to link to a flight controller such as our Ardupilot Mega 2.6 or Multiwii AIO via a USB equipped device such as a computer, laptop or tablet supporting a USB connection (OTG). The Radio set not only lets you see live data such as live GPS position overlaid on a map (if the flight controller has the GPS option) to system voltage, heading, waypoint navagation even artificial horizon and so much more, using open source MAVlink based ground station software. You can even fly your aircraft with a joystick via your computer and update settings live! Or just use it for your DIY projects that needs a wireless Serial interface. This kit offers a great low price, longer range (approx one mile with supplied antennas) and superior performance. The system utilizes the 433Mhz band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware.

The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and configuration of system parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

Interface to the module is via standard 5V-tolerant TTL serial / FT232 USB serial.

*2Km range is only possible when used in proper wether condition, very low air data rate and line of sight Ground-Air. With default settings and full transmit power on both ends the range is around 300-500 meters.

Features:

 

  • Very small size
  • Light weight (under 4 grams without antenna)
  • 433Mhz frequency band
  • Receiver sensitivity to -117 dBm
  • Transmit power up to 20dBm (100mW)
  • Transparent serial link
  • Air data rates up to 250kbps
  • Range of approx 1 mile with supplied antennas
  • Demonstrated range of several kilometers with a small omni antenna
  • Can be used with a bi-directional amplifier for even more range
  • MAVLink protocol framing and status reporting
  • Frequency hopping spread spectrum (FHSS)
  • Adaptive time division multiplexing (TDM)
  • Support for LBT and AFA
  • Configurable duty cycle
  • Built in error correcting code (can correct up to 25% data bit errors)
  • Open source firmware
  • AT commands for radio configuration
  • RT commands for remote radio configuration
  • Adaptive flow control when used with APM
  • Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF microcontroller.
  • Upgraded to more convince Molex 1.25mm

Specifications:

  • Band: 433MHz
  • Antenna connectors: RP-SMA connector
  • Output power: 100mW (20dBm), adjustable between 1-20dBm
  • Sensitivity: -117dBm sensitivity
  • Interface: Standard TTL UART
  • Connection status: LED indicators

Includes:

  • Radio Telemetry base station (USB Connection)
  • Telemetry Transceiver (Pin Header)
  • lead set x1
  • Antenna x 2
Request
Callback
Yes! I am Interested

Ublox NEO-M8N GPS Module with Compass for APM with extra connector for Pixhawk

Ublox NEO-M8N GPS Module with Compass for APM with extra connector for Pixhawk
  • Ublox NEO-M8N GPS Module with Compass for APM with extra connector for Pixhawk
Get Best Quote
Approx. Price: Rs 1,800 / PieceGet Latest Price

Product Details:

previous generationNEO-7N 1.4-1.6 meters accuracy
Support GPS/QZSS L1 C/AGLONASS L10F, BeiDou B1 protocol, and mode
SBAS L1 C/AWAAS, EGNOS, MSAS
Galileo-readyE1B/C (NEO-M8N)
Nav. update rate1Single GNSS: up to 18 HZ.
Assist Now GNSS Offline(up to 35 days)3.

Ublox NEO-M8N High Precision GPS Module with Built in Compass for APM and PIXHAWK FC is the new Ublox Neo-M8N GPS module that includes an HMC5883L digital compass. This module has a high level of sensitivity and features active circuitry for the ceramic patch antenna. It also comes enclosed in the plastic case to protect the module from the elements. This module outputs precise position updates at 10Hz and also has a rechargeable backup battery for warm starts. The Ublox NEO-M8N is configured to run at a baud rate of 38400 and can be used with Pixhawk and APM (you might need to modify the cable to fit your autopilot board).
Additionally, you can connect the same module to All versions of PIXHAWK Flight Controller just after swapping its 5-pin connector with an extra 6-pin connector provided in Package.
So if you want GPS telemetry for your FPV flying or camera ship?  This new generation Ublox GPS NEO-M8N is the answer.  Capable of accuracy between 0.6 and 0.9 meters it is a significant improvement over previous models. Sattelite searching and acquisition is very fast, generally taking around ten seconds to locate and acquire up to 6 satellites.  It also has a built-in compass with a 10Ghz refresh rate and a low noise figure which ensures this GPS module offers excellent performance.
The NEO-M8N provides the best performance and easiest RF integration of all the NEO-M8 configurations. The NEO form factor allows for easy migration from previous NEO generations. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. NEO-M8 combines a high level of robustness and integration capability with flexible connectivity options. The future-proof NEO-M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems.
Ublox NEO-M8N GPS Module for APM APM2.52 APM Flight Controller with Case and GPS Antenna Mount to protect the GPS preventing electromagnetic interference. A new generation Ublox GPS NEO-M8N GPS Module, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy. Support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more. The NEO-M8N and ceramic antenna make this a very accurate receiver, fast locks & lots of satellites, and the stand is very sturdy to protect the GPS preventing electromagnetic interference.
The most important improvement with this module is the vast sensitivity it offers. This module receives concurrent reception from GPS/QZSS, GLONASS and BeiDou meaning that you should get an excellent signal no matter where you are in the world. Not only does it have these excellent reception capabilities, it maintains its low power consumption. This module is also backward compatible with the NEO-7, NEO-6, and NEO-5 families
Features :GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.SBAS L1 C/A: WAAS, EGNOS, MSAS.Galileo-ready E1B/C (NEO-M8N).Nav. update rate1 Single GNSS: up to 18 HZ.Assistance AssistNow GNSS Online.Assist Now GNSS Offline (up to 35 days)3.Assist Now Autonomous (up to 6 days).OMA SUPL & 3GPP compliantOscillator TCXO (NEO-M8N/Q).Crystal (NEO-M8M).RTC crystal Built-In.Noise figure On-chip LNA (NEO-M8M). Extra LNA for.lowest noise figure (NEO-M8N/Q).Anti-jamming Active CW detection and removal.Extra onboard SAW bandpass filter (NEO-M8N/Q).Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).Supported antennas Active and passive.Odometer Travelled distance.Data-logger For position, velocity, and time (NEO-M8N).
Request
Callback
Yes! I am Interested

Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot

Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot
  • Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot
  • Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot
Get Best Quote
Approx. Price: Rs 5,500 / PieceGet Latest Price

Product Details:

Internal micro USB portexternal micro USB port extension
ST Micro X4HBA303H 14-bit accelerometer/magnetometer.
The advanced 32-bit ARM CortexM4 high-performance processorscan run NuttX RTOS real-time operating system
14 PWMservo output.
Bus interface(UART,I2C,SPI,CAN).
The integrated backup power and backup controller failsthe primary controller fails over to the backup control is safe

Description:Picking the right flight controller that suits your needs is always a daunting task… Don’t worry we robu.in is here to assist you to get a quality product. Buy this Pixhawk 2.4.8 32 Bit PX4 Autopilot flight controller for your drone application. what are you have to do is just check it’s a specification.The most common question asked by our community is “what is flight controller” and the answer is here The flight controller (aka FC) is the brain of the Drone(Quadcopter). It’s a circuit board with a range of sensors that detect movement of the drone, as well as user commands so Pixhawk 2.4.8 does. Using this data, it then controls the speed of the motors to make the craft move as instructed.It Supports 8 RC channel with 4 serial port. Various user interfaces are available for programing, reviewing logs, even some apps for smartphones & tablets. It detects and configures all its peripherals automaticallyThe benefits of the Pixhawk system include a Unix/Linux-like programming environment, completely new autopilot functions. Sophisticated scripting of missions and flight behaviour, and a custom PX4 driver layer ensuring tight timing across all processes.Features of Pixhawk 2.4.8:1. The advanced 32-bit ARM CortexM4 high-performance processors; can run NuttX RTOS real-time operating system.2. 14 PWM / servo output.3. Bus interface (UART, I2C, SPI, CAN).4. The integrated backup power and backup controller fails; the primary controller fails over to the backup control is safe.5. Provide automatic and manual modes.6. Provide redundant power input and failover.7. Multicolor LED lights.8. Provide a multi-tone buzzer Interface.9. Micro SD card to record flight data.________________________________________Specifications:Processor:1. 32bit STM32F427 Cortex M4 core with FPU.2. 32-bit STM32F103 failsafe co-processor.3. 168 MHz.4. 128 KB RAM.5. 2 MB Flash.Sensors:1. ST Micro L3GD20H 16 bit gyroscope.2. ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.3. Invensense MPU 6000 3-axis accelerometer/gyroscope.4. MEAS MS5607 barometer.Interfaces:1. 5x UART (serial ports), one high-power capable, 2x with HW flow control.2. 2x CAN (one with an internal 3.3V transceiver, one on expansion connector).3. Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.4. Futaba S.BUS® compatible input and output.5. PPM sum signal input.6. RSSI (PWM or voltage) input.7. I2C.8. SPI.9. 3.3 and 6.6V ADC inputs.10. Internal micro USB port and external micro USB port extension.
Package Includes :1 x Pixhawk 2.4.8 32 Bit Autopilot PX4 Drone Flight Controller.3 x Connecting Cables.1 x Buzzer Module.
Request
Callback
Yes! I am Interested

Ardupilot APM 2.8 Flight Controller

Ardupilot APM 2.8 Flight Controller
  • Ardupilot APM 2.8 Flight Controller
Get Best Quote
Approx. Price: Rs 2,300 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
MaterialPlastic
Model Name/NumberQP54
Voltage16V -20 V
Frequency20-50 kHz
Maximum current rating20-30 A
Diameter22mm

Ardupilot Mega (APM) is a professional quality IMU autopilot that is based on the Arduino Mega platform. This autopilot can control fixed-wing aircraft, multi-rotor helicopters, as well as traditional helicopters. It is a full autopilot capable for autonomous stabilisation, way-point based navigation and two way telemetry with Xbee wireless modules. Supporting 8 RC channels with 4 serial ports.
Request
Callback
Yes! I am Interested

KK2.1.5 - Mini Flight Controller Board

KK2.1.5 - Mini Flight Controller Board
  • KK2.1.5 - Mini Flight Controller Board
Get Best Quote
Approx. Price: Rs 1,500 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
MaterialGlass Fiber
Usage/ApplicationOutdoor
ApplicationAerial robotics
Size36 x 36 x 11.5 mm ( mounting holes 30.5 x 30.5 mm )
Weight8.6
Input voltage4.8 to 6.0 v
Lcd size24 x 18 mm

The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don''t let its size fool you as it''s just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

 

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

Request
Callback


Additional Information:

  • Item Code: KKMNFLYTCTRL
Yes! I am Interested

F550 Airframe Hexa Frame HexaCopter Support KK / MK / MWC

F550 Airframe Hexa Frame HexaCopter Support KK / MK / MWC
  • F550 Airframe Hexa Frame HexaCopter Support KK / MK / MWC
  • F550 Airframe Hexa Frame HexaCopter Support KK / MK / MWC
  • F550 Airframe Hexa Frame HexaCopter Support KK / MK / MWC
Get Best Quote
Approx. Price: Rs 1,300 / PieceGet Latest Price

Product Details:

ColorBlack + White + Red
Weight324g (6pcs)
Frame Arm Size215 x 38 x 50mm
Propeller10 x 4.5in; 8 x 4.5in
Battery3S~4S LiPo
Motor22 x 12mm (Stator size)

Description -

F550 is a multi-rotor designed for all pilots for fun or AP. With DJI WKM or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other activities. Made by advanced engineering material, super strong & smooth Kit (need assemble by yourself ). New design PCB board special for F550, support standard flight controller like MK, KK, FF, MWC, APM.

Specifications:

Features:
- F450 is a multi-rotor designed for all pilots for fun or AP.
- It can achieve hovering, cruising, even rolling and other flight elements.
- It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.
- Support standard flight controller like MK, KK, FF, MWC, APM
- DJI F450 Hexacopter basic frame wheel kit.
- Using high strength compound PCB frame board, which makes wiring of ESCs and battery more easily.
F550 Flame Wheel:
- Color: Black + White + Red
- Frame Arm Size: 215 x 38 x 50mm
- Weight: 54g (Single)
- Weight: 324g (6pcs)
F550 Multicopter Frame Center Plate:
- Color: Black
- Material: Glass Fiber
- Use For DJI F550 Hexacopter
Recommended Config (Not Included):
- Propeller: 10 x 4.5in; 8 x 4.5in
- Battery: 3S~4S LiPo
- Motor: 22 x 12mm (Stator size)
- ESC: 30A OPTO or 18A
Package Weight: 605g
Package Dimension (L x W x H): 255 x 250 x 50mm
After Sales Service: 1 Year Warranty
Package Include:

6 x Flame Wheel (2 Red, 2 Black, 2 White)
1 x F550 Top Plate
1 x F550 Bottom Plate
2 x Small Bag of Screws
Request
Callback
Yes! I am Interested

Fly-Sky 2.4G 6-Channel Receiver (R6B) for CT6B 6-CH TX (only receiver)

Fly-Sky 2.4G 6-Channel Receiver (R6B) for CT6B 6-CH TX (only receiver)
  • Fly-Sky 2.4G 6-Channel Receiver (R6B) for CT6B 6-CH TX (only receiver)
  • Fly-Sky 2.4G 6-Channel Receiver (R6B) for CT6B 6-CH TX (only receiver)
Get Best Quote
Approx. Price: Rs 2,000 / PieceGet Latest Price

Product Details:

PowerLess than 20db
Model TypeHeli, Airplane, Gliders RF
ModulationGFSK
Code TypePCM
Sensitivity1024
Low Voltage WarningLCD

Features:

Channels: 6 Channels

Model Type: Heli, Airplane, Gliders RF

Power: Less than 20db

Modulation: GFSK

Code Type: PCM

Sensitivity: 1024

Low Voltage Warning: LED

DSC Port: Yes

Charger Port: Yes



Package Includes: FS-R6B Receiver The transmitter requires a PC to modify any of the channel variables, including mixing and servo reversing.
Request
Callback
Yes! I am Interested

Lipo Battery Voltage Tester And Low Voltage Buzzer Alarm 1-8 Cell LED Display

Lipo Battery Voltage Tester And Low Voltage Buzzer Alarm 1-8 Cell LED Display
  • Lipo Battery Voltage Tester And Low Voltage Buzzer Alarm 1-8 Cell LED Display
  • Lipo Battery Voltage Tester And Low Voltage Buzzer Alarm 1-8 Cell LED Display
  • Lipo Battery Voltage Tester And Low Voltage Buzzer Alarm 1-8 Cell LED Display
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

Low voltage Buzzer alarm modefor 2-8S.
With a push key by which you canchange the value settings and save.
When voltage is below the set valueit will buzzer very loudly with red LED light. (pre-set value is 3.3V)
Mini shapeno larger than a common key.
Really useful in flightif you can't see the lights.
Use for1-8s Lipo/Li-ion/LiMn/Li-Fe.

 LIPO Battery Voltage Tester and low voltage buzzer alarm combo is easy to use. can save your model/batteries and investment. This is a new product combining all the voltage measurements with low-voltage alarm function. Li-Po Battery Voltage Buzzer+Indicator: directly plug it into your operating battery, it will monitor the conditions of your battery all the time, so your batteries shall remain within safe operating voltage range at all times.

Features:
* Low voltage Buzzer alarm mode for 2-8S.
* With a push key by which you can change the value settings and save.
* When voltage is below the set value, it will buzzer very loudly with red LED light. (pre-set value is 3.3V)
* Mini shape, no larger than a common key.
* Compact, easy to carry.
* Really useful in flight if you can't see the lights.
* Use for 1-8s Lipo/Li-ion/LiMn/Li-Fe.
* Voltage detection precision: ±0.01V
* Unit voltage display range: 0.5-4.5V
* Total Voltage display Range: 0.5-36V
* 1S test mode voltage range: 3.7-30V
* 1S test mode detection precision: ±0.5%
Request
Callback
Yes! I am Interested

SLA-05VDC-SL-A 4Pin 30A Power Relay

SLA-05VDC-SL-A 4Pin 30A Power Relay
  • SLA-05VDC-SL-A 4Pin 30A Power Relay
  • SLA-05VDC-SL-A 4Pin 30A Power Relay
  • SLA-05VDC-SL-A 4Pin 30A Power Relay
Get Best Quote
Approx. Price: Rs 70 / PieceGet Latest Price

Product Details:

Operating Temperature-25 to 70
Operating Voltage (VDC)5v
Supply Current (A)0.185
Opt. Relative Humidity(RH)45 85
Storage condition-25 to 70
Length (mm)26.85

It is an SLA-05VDC-SL-A 4Pin 30A Power Relay. The relay is switched with the help of a small signal from a microcontroller like an Arduino. This relay can be used to drive 30A devices.

Package Includes:

1 x SLA-05VDC-SL-A 4Pin 30A Power Relay.

Request
Callback
Yes! I am Interested

Coreless Motor with propeller

Coreless Motor with propeller
  • Coreless Motor with propeller
Get Best Quote
Approx. Price: Rs 40 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Usage/ApplicationOutdoor
ColorSilver
HeightDepending on Variant - 16mm, 20mm
DiameterDepending on Variant - 7mm, 8mm, 10mm
Shaft Diameter1.0mm
Cable Length60mm

Motor Description:
Motor Weight: about 5g
Operating Voltage range: 3v to 3.7v DC
Rated Speed - 39000 RPM 
Dimensions Available - 
1. 7x16mm 
2. 7x20mm
3. 8.5x20mm
4. 10x20mm
Request
Callback


Additional Information:

  • Item Code: 2C08520P75
Yes! I am Interested

Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone

Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
  • Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
  • Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
  • Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
  • Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
Get Best Quote
Approx. Price: Rs 950 / PieceGet Latest Price

Product Details:

NO DC/DC converterpower board via 5 volts
FTDI cablecompatible pinout
Standard 6-pinISP header
ATmega328PArduino bootloader
MAX7456 monochromeon-screen display
Pad for an AnalogDigital PWM RSSI signal

The Micro MinimOSD with all the features of the very popuar WiteSpy KV Team modded OSD but in a 16x16mm size. Doesn''t have the DC/DC converter, this means less heat when powered off a flight controller. The Micro MinimOSD is the same as the older MinimOSD hardware, but has been modified to take advantage of custom firmware options.You can choose firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight / Cleanflight control boards.You can connect two batteries up to 4S so you can see the main flight battery voltage. the second port will allow your FPV battery voltage on the display as well.  Description:NO DC/DC converter, power board via 5 voltsFTDI cable compatible pinoutStandard 6-pin ISP headerTwo LED indicatorsATmega328P with Arduino bootloaderMAX7456 monochrome on-screen display16 x 16mm SizePad for an Analog or Digital PWM RSSI signalPad for the connection of a Current SensorATmega328P with Arduino bootloaderStandalone, or with APM / Flip / Flip32+ flight controllersThese modifications allow direct connection of two batteries (up to 4S)This hardware take the hardware mods for this firmware, and builds them into an RTF solution.This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.Two independent power sections with an LED indicator on each.Solder jumpers for combining the power sectionsSolder jumper for PAL video option+5V 500mA regulator for up to +12V supply inputExposed test points for HSYNC and LOS Package included:1 x Micro Minim OSD board2 x pins (sets)
Request
Callback
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Sahib Chandock (Sales Head)
Bombay Electronics
13- B Shamrao Vithal Marg, Off Lamington Road
Grant Road, Mumbai - 400007, Maharashtra, India


Call Us


Send E-mail