Bombay Electronics
Bombay Electronics
Grant Road, Mumbai, Maharashtra
GST No. 27AABPC5348L1ZO
TrustSEAL Verified
Call 0804896970553% Response Rate
SEND EMAIL

Online Store Items

Prominent & Leading Manufacturer from Mumbai, we offer 12v dc rectangle gear / geared motor 30 rpm - high torque (formerly known as square gear), 12v dc rs-50-555 gear / geared motor 600 rpm - high torque, my1020z 600w + motor controller + twist throttle, diy electric bicycle kit, 12v dc rectangle gear / geared motor 240 rpm - high torque (formerly known as square gear), 12v dc rectangle gear / geared motor 60 rpm - high torque (formerly known as square gear) and 12v dc tauren gear / geared motor 150 rpm - high torque.

12v Dc Rectangle Gear / Geared Motor 30 Rpm - High Torque (formerly Known As Square Gear)

12v Dc Rectangle Gear / Geared Motor 30 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 30 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 30 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 30 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 30 Rpm - High Torque (formerly Known As Square Gear)
Approx. Price: Rs 1,100.00Shop Now
 Typical Applications -
Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.

Specifications -

Rated Voltage - 12v

RPM - 30 (at 12v)

Nominal Voltage - 12v

No- Load Current - 220 mA

Load Current - 1.3 A

Stall Current - 4.8A

Full (Stall) Load Torque - 80 kgcm

Weight - 500g Approx

You will be redirected to the 3rd party webstore

12v DC RS-50-555 Gear / Geared Motor 600 RPM - High Torque

12v DC RS-50-555 Gear / Geared Motor 600 RPM - High Torque
  • 12v DC RS-50-555 Gear / Geared Motor 600 RPM - High Torque
  • 12v DC RS-50-555 Gear / Geared Motor 600 RPM - High Torque
  • 12v DC RS-50-555 Gear / Geared Motor 600 RPM - High Torque
Approx. Price: Rs 1,120.00Shop Now
Applications - Label Printers, auto shutter, automatic stabilized voltage supply, grill, oven, coffee machine, garbage disposers, household appliances, slot machines, money detector, automatic actuator, towel disposal, lighting, coin refund devices, peristaltic.

Specifications -

Nominal Voltage - 12v

Voltage Range - 6v to 15v

RPM - 600 (at 12v)

No- Load Current - 220mA

Load Current - 1.3 A

Full Load Current - 4.8 A

Full (Stall) Load Torque - 7 kgcm
 

You will be redirected to the 3rd party webstore

MY1020Z 600W + Motor Controller + Twist Throttle, DIY Electric Bicycle Kit

MY1020Z 600W + Motor Controller + Twist Throttle, DIY Electric Bicycle Kit
  • MY1020Z 600W + Motor Controller + Twist Throttle, DIY Electric Bicycle Kit
  • MY1020Z 600W + Motor Controller + Twist Throttle, DIY Electric Bicycle Kit
  • MY1020Z 600W + Motor Controller + Twist Throttle, DIY Electric Bicycle Kit
  • MY1020Z 600W + Motor Controller + Twist Throttle, DIY Electric Bicycle Kit
Approx. Price: Rs 8,900.00Shop Now
Package Includes -
1 x 600W MY1020Z Motor (with gear reduction)
1 x 600W Controller for Motor
1 x Accelerator

36 Volt 600 Watt MY1020Z Gear Reduction Electric Motor with 10 Tooth #40 Chain Sprocket and Bracket
Description
36 volt 600 watt MY1020Z gear reduction electric motor with mounting bracket and a 10 tooth #40 chain sprocket (MY1020Z).

This fine motor with gear reduction might be the perfect little dynamo of power for your next garage project or custom build. The #40 size chain sprocket is often found on go-karts, as well as on some lawn & garden applications.
Specifications
Model: MY1020Z
Voltage: 36 volt DC
Rated Current: 21.4 amps
Rated Speed: 480 RPM
Sprocket: 10 tooth #40 chain
Output: 600 watts
Length of wires: 24"
Mounting Bracket: 4-5/8" X 2-3/4"

You will be redirected to the 3rd party webstore

12v DC Rectangle Gear / Geared Motor 240 RPM - High Torque (formerly known as Square Gear)

12v DC Rectangle Gear / Geared Motor 240 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 240 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 240 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 240 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 240 RPM - High Torque (formerly known as Square Gear)
Approx. Price: Rs 1,100.00Shop Now
Typical Applications -
Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.

Specifications -

Rated Voltage - 12v

RPM - 240 (at 12v)

Nominal Voltage - 12v

No- Load Current - 350 mA

Load Current - 1.3 A

Stall Current - 6A

Full (Stall) Load Torque - 20 kgcm

Weight - 500g Approx

You will be redirected to the 3rd party webstore

12v DC Rectangle Gear / Geared Motor 60 RPM - High Torque (formerly known as Square Gear)

12v DC Rectangle Gear / Geared Motor 60 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 60 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 60 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 60 RPM - High Torque (formerly known as Square Gear)
  • 12v DC Rectangle Gear / Geared Motor 60 RPM - High Torque (formerly known as Square Gear)
Approx. Price: Rs 1,100.00Shop Now
Typical Applications -
Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.

Specifications -

Rated Voltage - 12v

RPM - 60 (at 12v)

Nominal Voltage - 12v

No- Load Current - 220 mA

Load Current - 1.3 A

Stall Current - 4.8A

Full (Stall) Load Torque - 44 kgcm

Weight - 500g Approx

You will be redirected to the 3rd party webstore

12v DC Tauren Gear / Geared Motor 150 RPM - High Torque

12v DC Tauren Gear / Geared Motor 150 RPM - High Torque
  • 12v DC Tauren Gear / Geared Motor 150 RPM - High Torque
  • 12v DC Tauren Gear / Geared Motor 150 RPM - High Torque
  • 12v DC Tauren Gear / Geared Motor 150 RPM - High Torque
  • 12v DC Tauren Gear / Geared Motor 150 RPM - High Torque
Approx. Price: Rs 1,100.00Shop Now
Typical Applications -
Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.

Specifications -

Rated Voltage - 12v

RPM - 150 (at 12v)

Nominal Voltage - 12v

No- Load Current - 700 mA

Load Current - 4 A

Stall Current - 14 A

Full (Stall) Load Torque - 48 kgcm

Weight - 500g Approx

You will be redirected to the 3rd party webstore

350W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit

350W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
Approx. Price: Rs 8,299.00Shop Now
"Disclaimer – We will not be assisting in installation of the kit, please purchase only if you have experience of assembling the Hub Motor.
Only advice on electronic connections will be offered from our end.

Rated Voltage (V) - 36 ;
No load Current (A) - 1 ;
Rated Current (A) - 14 ;
Rated Power - 350W (250 - 350W) ;
Speed - 328 RPM ;
Rated Torque - 6N ;
Compatible Wheel Size - 20 to 28 inch ;
Spoke Holes - 36 holes ;
Wheel diameter - 130mm.

Package Includes -
1pc x 350W Hub motor
1pc x Freewheel
1pc x LED Controller
1pc x 350W controller
1pc x Throttle
1pc x Brake Set"

You will be redirected to the 3rd party webstore

3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel

3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel
  • 3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel
  • 3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel
  • 3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel
Approx. Price: Rs 63.00Shop Now
"OVERVIEW -
Wheel Outer diameter: 42MM.
Wheel width: 18 mm.
Tire material: Rubber.
Color: Black & White.
Weight: 43 gm.
Coder Accuracy: 12 pulses per revolution.
Wheel weight: 19.4 gm.

The product 3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel is customized high-quality rubber wheel, the diameter of 42mm. The hub for N20 micro motor output shaft design of the bayonet, the ferry can plug and play, without an additional field.

White provided inside the left 12 line encoding disc, convenient infrared encoder reads the rotation information. We recommend and MiniQ sites supporting the use of a flexible, simple mobile platform.

Features :
Coder Accuracy: 12 pulses per revolution.
Heavy Duty Material.
Durable and specially design 3PI miniQ Car wheel.

Package Includes :
1 x 3PI miniQ Car wheel Tyre. "

You will be redirected to the 3rd party webstore

6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.

6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.
  • 6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.
  • 6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.
  • 6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.
  • 6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.
  • 6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.
Approx. Price: Rs 2,699.00Shop Now
"Replacement Wheel/Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board.

Specifications -

Voltage - 24v.
Motor Type - Balance Car, Scooter, Brushless Hub motor.
Power Output - 250w-350w.
Shaft Diameter - Axle size 13.5mm & 16mm, length 53mm.
Wire length - 200mm approx.
Opening size - 110mm.
Color - Black.
Max speed - 26km/h.
Weight - 3kg approx.
Application - Self balancing drift car motor, Razor, electric scooter, light EV Car, E-bike, Electric bicycle, E-scooter, E-motor, motorcycle, small electric motor, etc. "

You will be redirected to the 3rd party webstore

10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor

10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Approx. Price: Rs 6,999.00Shop Now
"Specifications -

Rated Power - 350w.
Rated Voltage - 24v.
Speed - 800 RPM. (400-1000 RPM).
Motor Efficiency - >83%.
Rim Size - 10 inch.
Certification - CE, CCC, ROHS.
Speed - 12-28km/h.
Diameter - 254mm with tire.
Open File - 95mm.
Weight - 4.5 kg.
Load Weight - 80-150 KG. "

You will be redirected to the 3rd party webstore

12v Dc Johnson Side Shaft Gear, Geared Motor 1000 Rpm High Torque - A Grade

12v Dc Johnson Side Shaft Gear, Geared Motor 1000 Rpm High Torque - A Grade
  • 12v Dc Johnson Side Shaft Gear, Geared Motor 1000 Rpm High Torque - A Grade
  • 12v Dc Johnson Side Shaft Gear, Geared Motor 1000 Rpm High Torque - A Grade
  • 12v Dc Johnson Side Shaft Gear, Geared Motor 1000 Rpm High Torque - A Grade
Approx. Price: Rs 550.00Shop Now
"Applications - Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.
Specifications -

Voltage - 6v to 18v

RPM - 1000 (at 12v)

Nominal Voltage - 12v

No- Load Current - 500mA

Full Load Current - 7500mA

Full (Stall) Load Torque - 20 kgcm (max)"

You will be redirected to the 3rd party webstore

Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)

Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
  • Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
  • Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
  • Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
  • Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
Approx. Price: Rs 1,850.00Shop Now
"Popular as a scooter motor or general application motor. Extremely durable and reliable.
Commonly found in 24V scooters or even small kiddies carts and It's also been a proven motor in robotics!
100% Ball Bearing construction!

The belt drive is fitted to an 8mm d-cut shaft with a circlip. If you wish to remove it, you can simply remove the circlip and slide it off. Some companies glue these in place, but its not required as the fit is firm.

Note that we sell this in two versions, a chain drive unit (which is this one) and a belt drive unit. Fitted with a 9 tooth sprocket for #25 chain.

Voltage: 24v.
No-Load Current: 1a.
RPM: 3500.
Torque: 0.56Nm.
Loaded RPM: 2600-3000.
Wattage: 150W.
Rated Current: 14.3A.
Efficiancy: 70%.
Weight: 1.4Kgs.
11 tooth sprocket for #25 chain. "

You will be redirected to the 3rd party webstore

9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder 7.5 N-m Torque - TPG28395123000-334KE

9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE
  • 9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE
  • 9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE
  • 9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE
  • 9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE
  • 9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE
Approx. Price: Rs 1,699.00Shop Now

Description:-

This is a 12V DC planetary motor which has a gearbox of 28mm diameter.

The planetary type gearbox of this motor has a 334: 1 reduction ratio which produces 9 RPM with the torque value of around 7.5 N-m.

Planetary Gear DC Motor has the highest continuous and peak torque capability of any gearbox type.

They also feature a very compact, low-weight design in their Class.

Features :

  • Brushed permanent magnet DC motor.
  • Variable speed and reversible.
  • Planetary Gear Box.
  • Standard brush life of 2000+ hours (varies by application).

Specification:-

  • Model -TPG28M395-334K.
  • Motor Type - DC Carbon Brush Motor.
  • Gear Ratio - 334 : 1.
  • Operating Voltage(VDC) - 12.
  • Rated Current(A) - 0.250.
  • Rated Base Motor RPM - 3000.
  • Rated Speed(RPM) - 9.
  • Rated Torque (N-m) - 7.5.
  • Operating Temperature (°C) - -40 °C ~ +100°C.
  • Opt. Relative Humidity(RH) - 20% ~ 85% .
  • Gear Material - Powder Metallurgy, Steel, POM.
  • Housing Material - Metal.
  • Motor Body Size (Diameter) (mm) - 28.
  • Motor Length(mm) - 8.8.
  • Shaft Diameter (mm) - 6.
  • Shaft Length (mm) - 13.
  • Shaft Type - D-type.
  • Motor Weight(gm) - 230. 

Product Includes:-

1x 9 RPM 12V 28mm Tauren DC Planetary Gear DC Motor with Encoder  7.5 N-m Torque - TPG28395123000-334KE

You will be redirected to the 3rd party webstore

350W 24V Hub Motor for Electric Bike Bicycle Rear wheel

350W 24V Hub Motor for Electric Bike Bicycle Rear wheel
  • 350W 24V Hub Motor for Electric Bike Bicycle Rear wheel
  • 350W 24V Hub Motor for Electric Bike Bicycle Rear wheel
  • 350W 24V Hub Motor for Electric Bike Bicycle Rear wheel
  • 350W 24V Hub Motor for Electric Bike Bicycle Rear wheel
Approx. Price: Rs 5,250.00Shop Now
"Disclaimer – We will not be assisting in installation of the kit, please purchase only if you have experience of assembling the Hub Motor.
Only advice on electronic connections will be offered from our end.

Rated Voltage (V) - 24 ;
No load Current (A) - 1 ;
Rated Current (A) - 14 ;
Rated Power - 350W (250 - 350W) ;
Speed - 328 RPM ;
Rated Torque - 6N ;
Compatible Wheel Size - 20 to 28 inch ;
Spoke Holes - 36 holes ;
Wheel diameter - 130mm.

Package Includes -
1pc x Hub motor
1pc x Free wheel"

You will be redirected to the 3rd party webstore

12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor

12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
  • 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Approx. Price: Rs 7,500.00Shop Now
"Product Details -

1.Motor type: 12-inch brushless toothless hub wheel motor.
2.Rated power :350W.
3.Rated voltage :24V 36V 48V.
4.Speed :20~ 35KM / H.
5.Speed/RPM:450RPM.
6.Diameter​ :275mm.
7.Open Size: 140mm.
8.Motor Weight :4.5KG.
9.Load Weight: 150 -200KG.
10.Brake Compatible: electronic brake ,disc brakes.
11.Tires :12X2.125 / 2.5 .
12.Waterproof :IP54.
13.Application :electric scooter, folding electric car ,ebike,e-motorcycle,ebike ,front/rear drive.

Package includes -
1pc x 10inch Hub motor. "

You will be redirected to the 3rd party webstore

DC 60V 3000W BM1412 brushless motor, electric bicycle kit, DIY E-Tricycle For Medium And Heavy Load E-Tricycle ebike

DC 60V 3000W BM1412 brushless motor, electric bicycle kit, DIY E-Tricycle For Medium And Heavy Load E-Tricycle ebike
  • DC 60V 3000W BM1412 brushless motor, electric bicycle kit, DIY E-Tricycle For Medium And Heavy Load E-Tricycle ebike
  • DC 60V 3000W BM1412 brushless motor, electric bicycle kit, DIY E-Tricycle For Medium And Heavy Load E-Tricycle ebike
  • DC 60V 3000W BM1412 brushless motor, electric bicycle kit, DIY E-Tricycle For Medium And Heavy Load E-Tricycle ebike
  • DC 60V 3000W BM1412 brushless motor, electric bicycle kit, DIY E-Tricycle For Medium And Heavy Load E-Tricycle ebike
Approx. Price: Rs 32,999.00Shop Now
"Specifications of Tricycle Brushless DC Motor :


Excellent universal 60VBrushless motor, suitable for bikes, scooters, buggies, karts ,tricycle ,four wheeled vehicle and more!
In reality, it can be used for a variety of different applications!
It is supplied with a bi-directional Speed Controller so you are able to easily connect it and have it ready to go out of the box!

Note that you will need a hall effect throttle to hook up to the controller.


Model: BM1424ZXF.
Rated Output Power -3000W.
Rated Voltage - 60V DC.
Speed after Reduction - 570 RPM.
Rated Speed - 2850 RPM.
Gear Ratio - 1:5.
Full Load Current - 46/38A.
No Load Current - 6.50/6.0A.
Rated Torque - 49 N.m.
Application - Medium & Heavy Load size E-Tricycle.
Load weight: around 2000KG. "

You will be redirected to the 3rd party webstore

3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V

3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V
  • 3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V
  • 3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V
  • 3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V
  • 3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V
  • 3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V
Approx. Price: Rs 95.00Shop Now
Specification:

Size: approx.50x16x1mm.
Maximum discharge current: 10A.
Overcharge detection voltage: 4.25-4.35V±0.05V.
Over-discharge detection voltage: 2.3-3.0V±0.05V.
Maximum working current: 5A-8A.
Transient current: 9A-10A.
Operating temperature: -40~50℃.
Storage temperature: -40~80℃.
Quiescent current: <6uA.
Internal resistance: <60mΩ.
Service life: >30,000 hours.



Feature:

Short circuit protection.
Overcharge protection.
Over-discharge protection.
Overcurrent protection.
Can be applied to various 3.7V lithium core.
Compact size and lightweight.
Fine workmanship and durable.
Ensure the security of battery pack.

Suitable for:
10.8V (Rated voltage of polymer battery)
11.1V (18650 or 3.7V lithium battery rated voltage)
12.6V (Lithium battery full charge voltage)

You will be redirected to the 3rd party webstore

350W 24V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit

350W 24V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 24V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 24V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 24V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
  • 350W 24V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
Approx. Price: Rs 8,299.00Shop Now
"Disclaimer – We will not be assisting in installation of the kit, please purchase only if you have experience of assembling the Hub Motor.
Only advice on electronic connections will be offered from our end.

Rated Voltage (V) - 24 ;
No load Current (A) - 1 ;
Rated Current (A) - 14 ;
Rated Power - 350W (250 - 350W) ;
Speed - 328 RPM ;
Rated Torque - 6N ;
Compatible Wheel Size - 20 to 28 inch ;
Spoke Holes - 36 holes ;
Wheel diameter - 130mm.

Package Includes -
1pc x 350W Hub motor
1pc x Freewheel
1pc x LED Controller
1pc x 350W controller
1pc x Throttle
1pc x Brake Set"

You will be redirected to the 3rd party webstore

12V 700RPM 37MM GEARED DC MOTOR

12V 700RPM 37MM GEARED DC MOTOR
  • 12V 700RPM 37MM GEARED DC MOTOR
  • 12V 700RPM 37MM GEARED DC MOTOR
  • 12V 700RPM 37MM GEARED DC MOTOR
  • 12V 700RPM 37MM GEARED DC MOTOR
  • 12V 700RPM 37MM GEARED DC MOTOR
Approx. Price: Rs 975.00Shop Now
Description:
12V 700Rpm 37mm Geared DC Motor is a great choice for projects that require high torque and speed.
It can be easily used in sumo robot and field robot projects.
Metal gear.
High torque and speed.
700rpm speed.

Specification:
Operating Voltage: 12V
Speed: 700rpm
Stall Torque: 1.96A
Free Running Current: 60mA
Power: 23.5W
Motor Diameter: 36mm
Motor length: 87mm
Gear Diameter: 37mm
Shaft Diameter: 6mm
Shaft Length: 15mm
Weight: 175gr
Motor Voltage: 12 Volts
Motor RPM: 700
Product Includes:
60mA free running current

  • Power: 23.5W
  • Stall Torque: 1.96A
  • Speed: 700rpm
  • Operating Voltage: 12V
  • 60mA free running current

You will be redirected to the 3rd party webstore

4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module

4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
  • 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
  • 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
  • 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
  • 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
  • 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
  • 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
Approx. Price: Rs 144.00Shop Now
Description:-
The 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module comes with recovery function.
AUTO Recovery and Integrated 10 low load resistance MOS tube.
It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (If the cooling environment is not good, please reduce the load current use).
Charging voltage can be range between 16.8V to 18.1V
The board operates smoothly with Continuous charge current of (upper limit): 20A.
The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
The Board which can be easily installed in a compact size or on battery bundle itself.
Note:
Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use it in series.
Features:
4 string 16.8V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery.
Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version).
Charging voltage: 16.8V ? 18.1V.
Continuous discharge current: 40A (if the cooling environment is not good, please reduce the load current use).
Continuous charge current: 20A.
Equalization version: suitable for starting current below 80A, power 135W below the drill.

Specification:-
Battery: 4 Cell
Overcharge detection voltage (V): 4.25 ? 0.025
Over-discharge detection voltage (V): 2.50 ? 0.08
Over current Protection (A): 40
Working current (A): 2
Operating Temperature (?C): -40 to 85
Length: 60mm
Width: 45mm
Height: 3.5mm
Weight: 12mm

Package Includes:-
1x 4 Series 40A 18650 Lithium Battery Protection Board.

  • Battery: 4 Cell
  • Working current (A): 2
  • Operating Temperature (°C): -40 to 85
  • 4 string 16.8V 40A lithium battery protection board
  • Equalization version: suitable for starting current below 80A, power 135W below the drill.

You will be redirected to the 3rd party webstore

4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable

4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
  • 4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
  • 4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
  • 4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
  • 4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
Approx. Price: Rs 203.00Shop Now
Description:-
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable,
A Balance Board for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube.
Balanced current, for electric drill/sprayer/LED lights/low power inverter. (If the cooling environment is not good, please reduce the load current use)
Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of: 20A.
The balanced version is suitable for starting current below 80A, power 135W below the drill
Note:
The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery
Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above25V, capacity 10uF-100uF) to the motor?s positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series.
Features:
Overcharge protection,
Over-discharge protection function, short circuit protection function,
Overcurrent protection function.

Specification:-
Overcharge detection voltage: 3.9+ 0.05 V
Over charging voltage: 3.9+ 0.05 V
Over discharge voltage: 2.55?0.08
Overcharge detection delay time: 0.1s
Temperature range(C): -30 to 80.
Short circuit detection delay time: 100ms
Over current detection delay time: 500 ms
Balanced current: 60mA
Working current: 30A
Over current: 60A
Weight: 17mm
Dimensions in mm (LxWxH): 46 x 60 x 3.4

Package included:-
1x 4 Series 30A 18650 Lithium Battery Protection Board
1x Battery Connecting Cable

  • Overcharge protection
  • Over-discharge protection function, short circuit protection function
  • Overcurrent protection function, band balance
  • Temperature range(C): -30 to 80.
  • Short circuit detection delay time: 100ms

You will be redirected to the 3rd party webstore

5 RPM, 12V DC Geared Motor

5 RPM, 12V DC Geared Motor
  • 5 RPM, 12V DC Geared Motor
  • 5 RPM, 12V DC Geared Motor
  • 5 RPM, 12V DC Geared Motor
Approx. Price: Rs 160.00Shop Now
Description:-
DC Motor ? 5RPM ? 12Volts geared motors are generally a simple DC motor with a gearbox attached to it.
This can be used in all-terrain robots and variety of robotic applications.
These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
5 RPM 12V DC geared motors widely use for robotics applications.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.
Very easy to use and available in standard size.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.

Specifications:-
RPM: 5
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur) Gearbox
Shaft diameter: 6mm with internal hole
Torque: 3 kg-cm
No-load current = 60 mA (Max)
Load current = 300 mA (Max).

Product Includes:-
1x 5 RPM, 12V DC Geared Motor

  • 5RPM 12V DC motors with Gearbox
  • 6mm shaft diameter with internal hole
  • Stall Torque = 3kgcm torque
  • No-load current = 60 mA(Max)
  • Load current = 300 mA(Max)

You will be redirected to the 3rd party webstore

10 RPM, 12V DC Geared Motor

10 RPM, 12V DC Geared Motor
  • 10 RPM, 12V DC Geared Motor
  • 10 RPM, 12V DC Geared Motor
  • 10 RPM, 12V DC Geared Motor
Approx. Price: Rs 150.00Shop Now
Description:-
DC Motor ? 10RPM ? 12Volts geared motors are generally a simple DC motor with a gearbox attached to it.
This can be used in all-terrain robots and variety of robotic applications.
These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
10 RPM 12V DC geared motors widely use for robotics applications.
Very easy to use and available in standard size.
Also, you don?t have to spend a lot of money to control motors with compatible board.
With onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.
Very easy to use and available in standard size.

Specifications:-
RPM: 10.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur) Gearbox
Shaft diameter: 6mm with internal hole
Torque: 2.5kg-cm
No-load current = 60 mA (Max)
Load current = 300 mA (Max).

Product Includes:-
1x 10 RPM, 12V DC Geared Motor

  • 10RPM 12V DC motors with Gearbox
  • 6mm shaft diameter with internal hole
  • Stall Torque = 2.5kgcm torque
  • No-load current = 60 mA(Max)
  • Load current = 300 mA(Max)

You will be redirected to the 3rd party webstore

RS-555 DC Motor 12V

RS-555 DC Motor 12V
  • RS-555 DC Motor 12V
  • RS-555 DC Motor 12V
  • RS-555 DC Motor 12V
  • RS-555 DC Motor 12V
Approx. Price: Rs 120.00Shop Now
Description:-
RS-555 motor operates at DC 12V and maximum current up to 4A.
It is used in many applications like a portable drill for PCBs, DIY projects, etc.

Specifications:-
Operating voltage: 7 volt~14 volt
Nominal Voltage: 12 Volt
No Load Current: 0.2A
Maximum Current: 1.2 A
No Load Speed: 5000 RPM
No load Power Consumption: 2.4 Watts
Maximum Power Consumption: 15 Watts
Motor Shaft Diameter: 3.17mm

Product Includes:-
1x RS-555 DC Motor 12V

  • Operating voltage: 7 volt~14 volt
  • No Load Current: 0.2A
  • Maximum Current: 1.2 A
  • Maximum Power Consumption: 15 Watts
  • It is used in many applications like a portable drill for PCBs, DIY projects, etc

You will be redirected to the 3rd party webstore

5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)

5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
  • 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery - Battery Management System (1pcs)
Approx. Price: Rs 225.00Shop Now

This is 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery. It ensures the security of the battery pack.

Features :

1. Single section power consumption since: 30 μA

2. Power consumption between single section: 3 μA

3. Single section over charging sensing voltage: 4.18- / 4.22V

4. Over-charging recovery voltage: 4.05-4.15V

5. Overcharge detection delay: 0.5 / 1.0 / 2.0S

6. Single section discharge detection voltage: 2.75-2.85V

7. Over discharge recovery voltage: 2.90-3.20V

8. Discharge detection delay: 0.5-2.0S

Package Includes :

1 x BMS Charger Protection Board 1 x Connector Cable

You will be redirected to the 3rd party webstore

3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)

3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)
  • 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)
  • 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)
  • 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)
  • 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)
  • 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V Battery Managemet System BMS (1 pcs)
Approx. Price: Rs 73.00Shop Now

3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board (BMS) ensures the security of battery pack. This battery management system design and Suitable for: 10.8V (Rated voltage of polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (Lithium battery full charge voltage) 

1. Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C. 

2. Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current. 

3. 3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6A maximum working current. 

4. When the battery in series 3, please ensure that the voltage of each battery is the same, if not the same, please fill in each set of batteries and then use. When the discharge is tested, the battery in which the voltage drop is the fastest is the difference between the battery and the battery. 

5. After the line is connected to the need to charge (charge voltage 12.6V) activation, there will be output. 

6. 3A current above the discharge products, the battery discharge rate to 3C or more. Formula: 1C ratio of the battery, the 2000 capacity is equal to the maximum operating current 2AH*1=2A. 

Description interpretation.

7. 3 Series (series combination of 18650 3 batteries or lithium polymer batteries) 

8. 10.8V (polymer battery rated voltage) 

9. 11.1V (18650 or 3.7V lithium battery rated voltage) 

10. 12.6V (lithium battery voltage) 

Features : 

1. Three series of lithium battery protection board. 

2. Automatically cancel protection after protection conditions restore. 

3. With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection. 

4. Suitable for lithium battery pack of 11.1V, 12V, 12.6V.

Product Includes:-

1x 3 Series 20A 18650 Lithium Battery Protection Board BMS

You will be redirected to the 3rd party webstore

N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)

N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (1 pcs)
Approx. Price: Rs 265.00Shop Now

This N20 12V 600 Rpm Micro Metal Gear Motor has small volume, torsion big, all metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.

The N20 Micro Gear 12V 600 RPM DC Motor (High Torque) is lightweight, high torque, and low RPM motor. It is equipped with gearbox assembly so as to increase the torque of the motor. It has a cross-section of 1012mm, and the D-shaped gearbox output shaft is 9mm long and 3mm in diameter. It has a very small size so as fit in complex spaces of small-scale application. One can connect this Micro Gear Motor to wheels to drive them from one

This N20 Micro Gear 600RPM 12 V DC Motor (High Torque) has small volume, torsion big, all metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.

Features

This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motors output shaft.

Applications

  • This is a DC Mini Metal Gear Motor, ideal for making robots
  • Lightweight, high torque and low RPM
  • Rated Operating Voltage (VDC): 12
  • Rated Speed (RPM): 600
  • Product Includes:- 2 x N20 12V 600 Rpm Micro Metal Gear Motor

Specifications

  • Model No.: N20-12V-600
  • No Load Current (mA): 0.06 A
  • Rated Torque(kg-cm): 0.18
  • Stall Current (A) : 0.75
  • Stall Torque(Kg-Cm): 0.65
  • Rated Operating Voltage (VDC): 12
  • Operating Voltage (VDC): 6 ~ 12
  • Rated Speed (RPM): 600

In The Box

1 x N20 12V 600 Rpm Micro Metal Gear Motor

You will be redirected to the 3rd party webstore

Tbs 500 Carbon Fiber Frame Kit – (Copy)

Tbs 500 Carbon Fiber Frame Kit – (Copy)
  • Tbs 500 Carbon Fiber Frame Kit – (Copy)
  • Tbs 500 Carbon Fiber Frame Kit – (Copy)
  • Tbs 500 Carbon Fiber Frame Kit – (Copy)
  • Tbs 500 Carbon Fiber Frame Kit – (Copy)
Approx. Price: Rs 2,199.00Shop Now

Description:-

This quadcopter frame with a wheelbase of 500mm is specially intended to provide lots of mounting space.

It is well known for aerial video shooting and photography as it has a special Gimbal housing provision at the front.

The TBS quadcopter frames outperform similar quads in terms of FPV range and video link quality.

These large-sized quadcopter frames equip larger motors and batteries, increasing the power capabilities of your multirotor.

This advantage results in longer flight time, hence they are perfect for your aerial videography.

It comes with a PDB(Power Distribution Board) to power up the Quadcopter.

And is also designed to fit standard flight controllers/PDB, FPV cameras, and also FPV transmitters and antennas.

It features a mounting tab at the rear end on the bottom plate of the mainframe for mounting Batteries.

The added lift capacity makes this frame ideal for carrying larger payloads such as camera systems and Gimbal.

The frame comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the mainframe is done within a few minutes.

Also, it requires one size of bolt for the overall build and thus a unique one-size hex wrench which makes hardware mounting very convenient.

This feature of TBS Quadcopter Frames makes them so easy to assemble and disassemble.

Note: This is not an original TBS product, but a high-quality clone of one.

Features:

  • Made by advanced engineering material, super strong & smooth
  • The arm equips support ridges for better and faster forward flight.


Specifications:-

  • Model: TBS 500
  • Material: Carbon Fiber + Polyamide Nylon
  • Wheelbase (mm): 500
  • Weight (gm): 400
  • Arm Size (L x W) mm: 220 x 40
  • Motor Mounting Hole Dia. (mm): 3


Package Includes:-
2x TBS 500 Mainframe plates
1x Power distribution board
6x Spacers with anodized screws
Set of Screws

You will be redirected to the 3rd party webstore

N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)

N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
  • N20 12V 600 Rpm Micro Metal Gear Motor Metal Gearbox for RC Car Robot Toys DIY (2 pcs)
Approx. Price: Rs 500.00Shop Now

This N20 12V 600 Rpm Micro Metal Gear Motor has small volume, torsion big, all metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.

The N20 Micro Gear 12V 600 RPM DC Motor (High Torque) is lightweight, high torque, and low RPM motor. It is equipped with gearbox assembly so as to increase the torque of the motor. It has a cross-section of 1012mm, and the D-shaped gearbox output shaft is 9mm long and 3mm in diameter. It has a very small size so as fit in complex spaces of small-scale application. One can connect this Micro Gear Motor to wheels to drive them from one

DC Motor (High Torque) has small volume, torsion big, all metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.

Features

This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motors output shaft.

Applications

  • This is a DC Mini Metal Gear Motor, ideal for making robots
  • Lightweight, high torque and low RPM
  • Rated Operating Voltage (VDC): 12
  • Rated Speed (RPM): 600
  • Product Includes:- 2 x N20 12V 600 Rpm Micro Metal Gear Motor

Specifications

  • Model No.: N20-12V-600
  • No Load Current (mA): 0.06 A
  • Rated Torque(kg-cm): 0.18
  • Stall Current (A) : 0.75
  • Stall Torque(Kg-Cm): 0.65
  • Rated Operating Voltage (VDC): 12
  • Operating Voltage (VDC): 6 ~ 12
  • Rated Speed (RPM): 600

In The Box

2 x N20 12V 600 Rpm Micro Metal Gear Motor


You will be redirected to the 3rd party webstore

BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)

BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
  • BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
  • BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
  • BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
  • BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
  • BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
  • BO Gear Motor 150 RPM for DIY Projects and Robotics (Pack of 2)
Approx. Price: Rs 120.00Shop Now

The BO Series 2 150RPM DC Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot.

Mounting holes on the body & light weight makes it suitable for in-circuit placement.

This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor.

It is an alternative to our metal gear DC motors.

It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Single shaft plastic gear motor - bo series L shape motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

The quietness of operation.

Tolerances often less critical than for metal gears, due in part to their greater resilience.

Consistency with the trend to greater use of plastic housings and other components.

Features

Cost-effectiveness of the injection-molding process.

Elimination of machining operations.

Low density: lightweight, low inertia.

Uniformity of parts.

Capability to absorb shock and vibration as a result of elastic compliance.

Ability to operate with minimum or no lubrication, due to inherent lubricity.

The relatively low coefficient of friction.

Corrosion-resistance; elimination of plating, or protective coatings.

Specifications
  • Operating Voltage (VDC): 3 ~ 12
  • Shaft Length (mm): 8.5
  • Shaft Diameter (mm) (Double D-type): 5.5
  • No Load Current (mA): 40-180mA.
  • Rated Speed After Reduction (RPM): 150
  • Rated Torque (Kg-Cm): 0.8
  • Weight (gm): 30
  • Gearbox Shape: L-Shape

Package Includes

2pcs x BO Motor L Shape

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200

Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
Approx. Price: Rs 9,685.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/20
Voltage - 12/24/48/90/180
RPM - 35/50/70/100/150/200
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 262
D dimension value (refer to image) - 80
C dimension value (refer to image) - 60 
C1 dimension value (refer to image) - 92
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 45
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 30

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200

Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
Approx. Price: Rs 11,310.00Shop Now

Product Details:

Size35 RPM
Style12V

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/4
Voltage - 12/24/48/90/180
RPM - 35/50/70/100/150/200
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 274
D dimension value (refer to image) - 90
C dimension value (refer to image) - 65 
C1 dimension value (refer to image) - 97
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 45
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 30

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200

Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
Approx. Price: Rs 6,565.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/20
Voltage - 12/24/48/90/180
RPM - 35/50/70/100/150/200
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 208
D dimension value (refer to image) - 80
C dimension value (refer to image) - 60 
C1 dimension value (refer to image) - 92
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 45
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 30

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200

Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Foot Mounting - RPM Range 35 to 200
Approx. Price: Rs 7,410.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/10
Voltage - 12/24/48/90/180
RPM - 35/50/70/100/150/200
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 229
D dimension value (refer to image) - 80
C dimension value (refer to image) - 60 
C1 dimension value (refer to image) - 92
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 45
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 30

You will be redirected to the 3rd party webstore

12v Dc Rectangle Gear / Geared Motor 10 Rpm - High Torque (formerly Known As Square Gear)

12v Dc Rectangle Gear / Geared Motor 10 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 10 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 10 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 10 Rpm - High Torque (formerly Known As Square Gear)
  • 12v Dc Rectangle Gear / Geared Motor 10 Rpm - High Torque (formerly Known As Square Gear)
Approx. Price: Rs 1,100.00Shop Now
 Typical Applications -
Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.

Specifications -

Rated Voltage - 12v

RPM - 10 (at 12v)

Nominal Voltage - 12v

No- Load Current - 220 mA

Load Current - 1.3 A

Stall Current - 4.8A

Full (Stall) Load Torque - 90 kgcm

Weight - 500g Approx

You will be redirected to the 3rd party webstore

12v Dc Square Gear / Geared Motor 100 Rpm - High Torque

12v Dc Square Gear / Geared Motor 100 Rpm - High Torque
  • 12v Dc Square Gear / Geared Motor 100 Rpm - High Torque
  • 12v Dc Square Gear / Geared Motor 100 Rpm - High Torque
  • 12v Dc Square Gear / Geared Motor 100 Rpm - High Torque
  • 12v Dc Square Gear / Geared Motor 100 Rpm - High Torque
Approx. Price: Rs 1,100.00Shop Now
Typical Applications -
Pan/ Tilt camera, auto shutter, welding machines, water meter, IC Card, grill, oven, cleaning machine, garbage disposers, household appliances, Slot machines, Money detector, automic actuator, coffee machine, Towel disposal, lighting , Coin refund devices, Peristaltic pump.

Specifications -

Rated Voltage - 12v

RPM - 100 (at 12v)

Nominal Voltage - 12v

No- Load Current - 220 mA

Load Current - 1.3 A

Stall Current - 4.8A

Full (Stall) Load Torque - 25 kgcm

Weight - 500g Approx

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400

Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/20 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
Approx. Price: Rs 6,910.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/20
Voltage - 12/24/48/90/180
RPM - 25/50/100/150/200/300/400
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 208
D dimension value (refer to image) - 80
C dimension value (refer to image) - 72 
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 60
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 50

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400

Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/10 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
Approx. Price: Rs 7,761.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/10
Voltage - 12/24/48/90/180
RPM - 25/50/100/150/200/300/400
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 229
D dimension value (refer to image) - 80
C dimension value (refer to image) - 72 
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 60
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 50

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400

Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/6 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
Approx. Price: Rs 10,086.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/6
Voltage - 12/24/48/90/180
RPM - 25/50/100/150/200/300/400
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 262
D dimension value (refer to image) - 80
C dimension value (refer to image) - 72 
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 60
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 50

You will be redirected to the 3rd party webstore

Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400

Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
  • Worm Geared DC Motor 12V to 180V DC 1/4 HP Industrial Gearbox Flange Mounting - RPM Range 25 to 400
Approx. Price: Rs 11,700.00Shop Now

NOTE - This product is manufactured in our factory only after receiving the order. It will take 3-5 days to dispatch. 

Description
 -

Elevate your machinery and projects to new heights with our Worm Gear DC Motor. This motor is not just a power source; it's a precision-engineered workhorse designed to excel in a multitude of applications. With its robust design and dependable performance, it's the perfect choice for those seeking precise control, durability, and efficiency.

Using a worm gearbox in a motor offers several advantages:

  1. High Torque: Worm gearboxes provide significant torque amplification in a single stage.
  2. Load Holding: They self-lock, eliminating the need for additional brakes or clutches.
  3. Smooth & Quiet: Operate with minimal backlash, ensuring smooth, quiet motion.
  4. Compact: Relatively small design, suitable for tight spaces.
  5. Efficient: Modern designs offer improved efficiency in power transfer.
  6. Versatile: Applicable across various industries and equipment.
  7. Durable: Constructed with robust materials for longevity.
  8. Low Maintenance: Require minimal upkeep, reducing costs.
  9. Precise: Ideal for applications needing accurate positioning.
  10. Safety: Prevent unexpected movement in safety-critical applications.

 

Specifications -
Horse Power - 1/4
Voltage - 12/24/48/90/180
RPM - 25/50/100/150/200/300/400
No Load Current - 
Full Load Current - 
L dimension value (refer to image) - 274
D dimension value (refer to image) - 90
C dimension value (refer to image) - 77 
SD1 dimension value (refer to image) - 12
S.L1 dimension value (refer to image) - 60
K1 dimension value (refer to image) - 4
K2 dimension value (refer to image) - 2 
K3 dimension value (refer to image) - 50

You will be redirected to the 3rd party webstore

View More
X

Explore More Products

View All Products




Reach Us
Sahib Chandock (Sales Head)
Bombay Electronics
13- B Shamrao Vithal Marg, Off Lamington Road
Grant Road, Mumbai - 400007, Maharashtra, India
Get Directions


Call Us


Send E-mail