Electric Bicycle Motor & Accessories

Product Details:

Disclaimer – We will not be assisting in installation of the kit, please purchase only if you have experience of assembling the Hub Motor.Only advice on electronic connections will be offered from our end. 
This Kit has all the components (except batteries) to convert your cycle into an e-cycle. It also includes some additional accessories. 
SPECIFICATIONS:Usage: BicycleOperating Voltage: 36vWorking Temperature : -20???-45???Rated RPM: 180-290rpmUnload Amp/ Peak Amp: 1A/12AContinuous Power Rated & Peak : 250/550wTorque (nm) Peak: 38nmPeak Efficiency : 85%Water & Dust protection Level (IP Rating): IP65Weight of motor : 2.3kgMaximum Speed : 25km/hr.Motor shaft size : 110mm.
Package Includes - 1pc x 350W Hub motor1pc x 350W controller 1pc x Brake Set1set x Spokes for Wheel1pc x Throttle with 3 way speed mode1pc x Headlight with battery indicator1pc x central locking system for keyless start1pc x Indicator switches1pc x Buzzer Horn1set x Screws and nuts for fixures

Product Details:

36 volt 600 watt MY1020Z gear reduction electric motor with mounting bracket and a 10 tooth #40 chain sprocket (MY1020Z).

This fine motor with gear reduction might be the perfect little dynamo of power for your next garage project or custom build. The #40 size chain sprocket is often found on go-karts, as well as on some lawn & garden applications.

Model: MY1020Z
Voltage: 36 volt DC
Rated Current: 21.4 amps
Rated Speed: 480 RPM
Sprocket: 10 tooth #40 chain
Output: 600 watts
Length of wires: 24"
Mounting Bracket: 4-5/8" X 2-3/4"

Product Details:

BM1418ZXF 350W Motor

Rated Output Power - 350W
Rated Voltage - 48V
DC Speed after Reduction - 480
RPM Rated Speed - 2800
RPM Gear Ratio - 1:6
Full Load Current - 9.4A
No Load Current - 2.8A
Rated Torque - 7.2 N.m.
Application - Small and Medium size E-Tricycle

Packing List -
1 x 48v 350W BM1418ZXF Brushless Motor
1 x 48v 350W Brushless Controller
1 x Chain
1 x Flywheel
1 x Sprocket
1 x Adapter
1 x Accelerator
1 x Power lock / Ignition

Additional Information:

• Item Code: M128

Product Details:

DESCRIPTION:
We understands the inventive mind and the thrill of creating something all your own. That is why we are proud to present the 24 volt 350 watt MY1016Z3 gear reduction motor complete with a 9 tooth 1/8" bicycle chain sprocket.

This motor is great for those wanting to make their own custom electric vehicle, whether it's a scooter, electric bicycle or something the world isn't even ready for. This electric motor with gear reduction produces more low-end torque than your standard motor.

Note: This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires.

 

SPECIFICATIONS:

• Model:MY1016Z3
• Voltage: 24 volts DC
• Output: 350 watt
• Rated Speed (after Reduction): 300 RPM
• Rated Speed (Base Motor): 3200 RPM
• Rated Current: 19.2 amp
• Sprocket: 9 tooth 1/8" bicycle chain

 

KEY FEATURES:

• 24 volt 350 watt
• 9 tooth 1/8" bicycle chain sprocket
• Left or right rotation by reversing wires
• MY1016Z3 motor with gear reduction
• 300 RPM (after Reduction)

Benefits:

• Low maintenance because of the higher quality materials used. 
• Smooth acceleration which helps in preventing jerks and extends the life of mechanical components.
• Motor is easy to operate and handle.

 

Get best price for DC Geared Motor.

Product Details:

Popular as a scooter motor or general application motor . Extremely durable and reliable . Commonly found in 12V scooters or even small kiddies carts and also a proven motor in robotics ! 100% Ball Bearing construction !

There are a few different versions of this motor with the earlier versions having a body length between 97-100 mm .
It just depends on what revision of the motor you get . The newer versions of this motor are shorter than the original , though the face mounting is the same as is the design of the motor (the only changes are in the core winding and magnets) .

Model: MY6812B
Voltage: 12 volts DC
Output: 100 watts
RPM: 2750
Case Length: 3-15/16" (100 mm)
Case Diameter: 2-11/16" (68 mm)
Drive Shaft Length: 1-1/8" (28 mm)
Drive Shaft Diameter: 5/16" (8 mm)
Mounting Hole Distance: 1-9/16" (40 mm)

Product Details:

Attachments / Wiring Connections on controller :

1. Brake Wire
2. Charging Port
3. Derailleur / Throttle
4. Indicator
5. Power Locks
6. Brake Light
7. Motor
8. Battery

Product Details:

This popular reduction motor is simply the most commonly used motor for Scooters, Bikes and quad's available in the market!

It is normally found in the better quality quads and scooters on the market and is classed as a mid range combination.

They are quite powerful for their small size and extremely reliable. We've sold these for so many different applications that they were never designed for, but the robustness of the build makes them just go and go and go etc!

Specifications:

• MY1016Z
• 24 Volt DC Operation
• Permanent Magnet DC Motor
• No Load RPM: 3850
• No Load Current: <2.2 Amps
• Rated Wattage: 250W (0.33 Horsepower)
• Rated Load RPM: 400
• Torque (NM): 22
• Rated Current: 13.4 Amps
• Efficiency: 78%
• Reduction Ratio: 9.78:1
• Direct Drive (No Free Spooling)
• Suitable for Forward and Reverse Operations
• Base Mount Model
• 9 Tooth Sprocket for 1/2" x 1/8" Pitch Chain

This motor is capable of rotation in either clockwise or counter clockwise by reversing the motor's power wires.

For Chain Size: Pitch 0.5in; Roller Diameter 0.3in; Roller Width 0.16in

Features & Benefits:

• Low noise which helps in creating a more comfortable and less distracting atmosphere.
• Motor complies with international and national quality standards/systems.
• Motor is easy to operate and handle.
• Low cost of operation due to less consumption of electricity.

Get best price for DC Geared Motor For E Bike.

Additional Information:

• Item Code: MY1016Z2524V

Product Details:

Electric Scooter Brush Motor, Chain drive electric scooter motor, High Speed Permanent Magnet Motor .With metal bracket to mount to scooter11 tooth gear for # 25H chainThis motor can fit for 36V 1000W electric scooterDIY bicycle , E-bikes , Electric scooters. Compatible with many other electric scooter makes and models.

AmpsSprocket : 11 tooth sprocket
Rating torque : 2.8
N.mEfficiency: 78%
Chain: Uses 25H chain (Bicycle chain)
Casing Size: Approx. deep 150mm x diameter 110 mm

Additional Information:

• Item Code: MY1000W

Product Details:

Package Details- The motor kit include:
1. 1pcs x 24v MY1016 250w motor
2. 1pcs x 24v 250w controller
3. 1 pcs x 80T tooth ???Dental plate???
4. 1 pair x Throttles
5. 1 pcs x 25H chain
6. 1 pcs x Freewheel
7. 1 pcs x electric door lock
8. 1 pc x Charger

Pls note - This kit does not include battery
Specifications of Motor -
Electric Bicycle permanent Magnet DC Motor MY1016.
transmission :chain sprocket (11 teeth, pitch 1/4"=6,35 mm), exchangeable, fixation nut shaft diameter :10 mm (milled groove one-sided 1,5 mm)

Easy diy electric bicycle kit to convert normal cycle to electric cycle.Can be converted with the help of electric motor for bicycle such as bldc motor kit or hub motor kit. Best priced electric bicycle conversion kit available in market. comes with or without electric bike wheel. Can be used as electric mountain bike.

Additional Information:

• Item Code: MY1016CK

Product Details:

Packing Details - The motor kit includes:
1. 1pcs x MY1016Z3 DC 24V 350W motor. \
2. 1pcs x Motor controller.
3. 1pcs x Chain.
4. 1pcs x Freewheel.
5. 1pcs x Freewheel adapter.
6. 1pcs x Mounting plate with bolts.
7. 1pcs x Throttle handle & Brake lever.
8. 1pcs x Headlight.
9. 1pcs x Switch & key.
10.1pcs x 18cm axis.

Please note - This kit does not include batteries.

Specifications of Motor -
This popular reduction motor is simply the most commonly used motor for Scooters, Bikes and quad's available in the market! It is normally found in the better quality quads and scooters on the market and is classed as a mid range combination. They are quite powerful for their small size and extremely reliable. We've sold these for so many different applications that they were never designed for, but the robustness of the build makes them just go and go and go etc!
Specifications: MY1016Z3. 24 Volt DC Operation. Permanent Magnet DC Motor. No Load RPM: 3850. No Load Current: <2.2 Amps. Rated Wattage: 350W (0.50 Horsepower). Rated Load RPM: 400. Torque (NM): 40. Rated Current: 19 Amps. Efficiency: 78%. Reduction Ratio: 9.78:1. Direct Drive (No Free Spooling). Suitable for Forward and Reverse Operations. Base Mount Model. 9 Tooth Sprocket for 1/2" x 1/8" Pitch Chain. This motor is capable of rotation in either clockwise or counter clockwise by reversing the motor's power wires.For Chain Size: Pitch 0.5in; Roller Diameter 0.3in; Roller Width 0.16in

Additional Information:

• Item Code: BE0083

Product Details:

MY1016ZL Electric Wheelchair Motor. 
Model: MY1016ZL. 
Working voltage: 24V. 
Starting Current: 3A. 
Rated Torque: 36Nm. 
Noise: <60DB. 
Wheelchair motor output power: below 1100W. 
Operating speed: un-load 75 rpm or 120rpm; 
Reduction Ratio: 40:1.  
Installation structure: end face. 
Function type: wheelchair. 
Protection form: IP44. 
Insulation class: E. 
Power supply type: DC. 
How it works: permanent magnet DC. 
Product Description: With small size, low speed high torque output, low noise, high reliability, easy maintenance etc.

Additional Information:

• Item Code: BE0311

Product Details:

Replacement Wheel/Motor for Self-Balancing Scooters Hover Board Electric and Self Balance Board. 

Specifications - 

Voltage - 24v. 
Motor Type - Balance Car, Scooter, Brushless Hub motor. 
Power Output - 250w-350w. 
Shaft Diameter - Axle size 13.5mm & 16mm, length 53mm. 
Wire length - 200mm approx. 
Opening size - 110mm. 
Color - Black. 
Max speed - 26km/h. 
Weight - 3kg approx. 
Application - Self balancing drift car motor, Razor, electric scooter, light EV Car, E-bike, Electric bicycle, E-scooter, E-motor, motorcycle, small electric motor, etc.

Additional Information:

• Item Code: BE0294

Product Details:

36V 600W Brush motor controller fit for 600W scooters and electric bikes
Specifications:Rated Voltage: 36V DCWattage: 600WUnderVoltage - 32VThrottle - 1-4vColour: silverDimensions: 83 x 65 x 39mmCasing material: aluminium
Wiring connections on controller:1 Brake wire2 Charging port3 Derailleur /throttle4 Indicator5 Power locks6 Brake light7 Motor8 Battery

Product Details:

MY1016ZL Electric Wheelchair MotorModel: MY1016ZLWorking voltage: 24V
Wheelchair motor output power: below 1100WOperating speed: un-load 75 rpm or 120rpm;Installation structure: end faceFunction type: wheelchairProtection form: IP44Insulation class: EPower supply type: DCHow it works: permanent magnet DCProduct Description: With small size, low speed high torque output, low noise, high reliability, easy maintenance etc

Product Details:

Product Details -  1.Motor type: 12-inch brushless toothless hub wheel motor. 2.Rated power :350W. 3.Rated voltage :24V 36V 48V. 4.Speed :20~ 35KM / H. 5.Speed/RPM:450RPM. 6.Diameter  :275mm. 7.Open Size: 140mm. 8.Motor Weight :4.5KG. 9.Load Weight: 150 -200KG. 10.Brake Compatible electronic brake ,disc brakes. 11.Tires :12X2.125 / 2.5  . 12.Waterproof :IP54. 13.Application :electric scooter, folding electric car ,ebike,e-motorcycle,ebike ,front/rear drive.  Package includes - 1pc x 10inch Hub motor, 1pc x controller for hub motor.

Product Details:

Specifications:Inside Diameter: about 2.2cmWire length: approx. 143cm/ 56.2"Colour: black grips with silver endsIncludes: 1 throttle grip, 1 normal grip (matching pair)Throttle Control Set Three PinBlue: signal wireBlack: negative poleRed: positive poleElectric Throttle,Motorcycle,ScooterSuitable for most 12v,24v,36v,48V bike,scooter with hall controller
Package Included:1x Throttle grip1x Normal grip