Microcontroller

Product Details:

This is a Chinese version of ATmega328P-PU IC which also known as ATmega328P-U. So you may receive IC with printed name ATmega328P-U.The ATMEGA328P- U is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.The ATmega328P-PU AVR is supported with a full suite of program and system development tools including C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation Kits.

Product Details:

Features • High-performance, Low-power Atmel® AVR® 8-bit Microcontroller • Advanced RISC Architecture – 131 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 16 Kbytes of In-System Self-programmable Flash program memory – 512 Bytes EEPROM – 1 Kbyte Internal SRAM – Write/Erase Cycles: 10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85°C/100 years at 25°C(1) – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security • JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Four PWM Channels – 8-channel, 10-bit ADC 8 Single-ended Channels 7 Differential Channels in TQFP Package Only 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x – Byte-oriented Two-wire Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF • Operating Voltages – 2.7V - 5.5V for ATmega16L – 4.5V - 5.5V for ATmega16 • Speed Grades – 0 - 8 MHz for ATmega16L – 0 - 16 MHz for ATmega16 • Power Consumption @ 1 MHz, 3V, and 25°C for ATmega16L – Active: 1.1 mA – Idle Mode: 0.35 mA – Power-down Mode: <

Product Details:

This is a Chinese version of ATmega328P-PU IC which also known as ATmega328P-U. So you may receive IC with printed name ATmega328P-U.The ATMEGA328P- U is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.The ATmega328P-PU AVR is supported with a full suite of program and system development tools including C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation Kits.

Product Details:

1. 131 powerful instructions – Most Single Clock Cycle Execution
2. 32 x 8 general purpose working registers
3. Fully static operation
4. Up to 20MIPS throughput at 20MHz
5. On-chip 2-cycle multiplier
6. Write/erase cycles: 10,000 flash/100,000 EEPROM
7. Optional boot code section with independent lock bits
8. In system programming by on-chip boot program
9. True read while write operation
10. Programming lock for software security
11. Two 8-bit timer/counters with separate prescaler and compare mode
12. One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
13. Real-time counter with separate oscillator

Product Details:

The ATMEGA328P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATMEGA328P achieves through puts approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. 

The high-performance Power 8-bit AVR RISC-based microcontroller combines 32KB ISP flash memory with read-while-write capabilities, 1024B EEPROM, 2KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte-oriented 2-wire serial interface, SPI serial port, a 6-channel 10-bit A/D converter (8-channels in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, and five software selectable power saving modes. The device operates between 1.8-5.5 volts.

By executing powerful instructions in a single clock cycle, the device achieves through puts approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Features:-

• High-performance, Low-power Atmel AVR 8-bit Microcontroller 

• Advanced RISC Architecture 

   - 131 powerful instructions – most single clock cycle execution 

   - 32 × 8 General Purpose Working Registers + Peripheral Control Registers 

   - Fully Static Operation 

   - Up to 16MIPS Throughput at 16MHz 

   - On-chip 2-cycle Multiplier

• High Endurance Non-volatile Memory segments 

   - 32K bytes of in-system self-programmable flash program memory 

   - 1Kbytes EEPROM 

   - 2Kbytes internal SRAM 

   - Write/erase cycles: 10,000 flash/100,000 EEPROM 

   - Data retention: 20 years at 85°C/100 years at 25°C(1) 

   - Optional Boot Code Section with Independent Lock Bits 

• In-System Programming by On-chip Boot Program 

• True Read-While-Write Operation 

Programming Lock for Software Security 

• Peripheral Features 

Two 8-bit Timer/Counters with separate prescaler and compare mode 

One 16-bit Timer/Counter with separate prescaler, compare mode, and capture mode 

Real Time Counter with Separate Oscillator 

Six PWM channels 

8-channel 10-bit ADC in TQFP and QFN/MLF package        

Temperature measurement 

 Programmable serial USART 

 Master/Slave SPI Serial Interface 

 Programmable Watchdog Timer with On-chip Oscillator 

On-chip Analog Comparator 

Byte Oriented 2-wire Serial Interface 

Interrupt and Wake-up on Pin Change 

• Special Microcontroller Features 

Power-on Reset and Programmable Brown-out Detection 

Internal Calibrated RC Oscillator 

External and Internal Interrupt Sources 

Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and  Extended Standby ''

• I/O and Packages  
23 programmable I/O lines 
32-lead TQFP, and 32-pad QFN/MLF 

 Operating voltage 

 40???C to 85???C Industrial 
• Speed Grades

0 to 8MHz at 2.7 to 5.5V (auto motive temperature range: –40°C to +125°C) 
0 to 16MHz at 4.5 to 5.5V (automotive temperature range: –40°C to +125°C) 
Low power consumption  
Active mode: 1.5mA at 3V - 4MHz Power-down mode: 1µA at 3V 

Product Details:

Product Description

Atmega48PA - PU - 28Pins(DIP) 4kb 8-bit,Flash, AVR Microcontroller

Features

• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
  • 131 Powerful Instructions – Most Single Clock Cycle Execution
  • 32 x 8 General Purpose Working Registers
  • Fully Static Operation
  • Up to 20 MIPS Throughput at 20 MHz
  • On-chip 2-cycle Multiplier
• • High Endurance Non-volatile Memory Segments – 4K Bytes of In-System Self-Programmable Flash progam memory
  • 256 Bytes EEPROM (ATmega48PA)
  • 512 Bytes Internal SRAM (ATmega48PA)
  • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
  • Data retention: 20 years at 85°C/100 years at 25°C(1)
  • Optional Boot Code Section with Independent Lock Bits
    • In-System Programming by On-chip Boot Program
    • True Read-While-Write Operation 
  • Programming Lock for Software Security
• • Peripheral Features
  • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
  • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
  • Real Time Counter with Separate Oscillator
  • Six PWM Channels
  • 8-channel 10-bit ADC in TQFP and QFN/MLF package Temperature Measurement
  • 6-channel 10-bit ADC in PDIP Package Temperature Measurement
  • Programmable Serial USART
  • Master/Slave SPI Serial Interface
  • Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
  • Programmable Watchdog Timer with Separate On-chip Oscillator
  • On-chip Analog Comparator
  • Interrupt and Wake-up on Pin Change
• • Special Microcontroller Features
  • Power-on Reset and Programmable Brown-out Detection
  • Internal Calibrated Oscillator
  • External and Internal Interrupt Sources
  • Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
• • I/O and Packages
  • 23 Programmable I/O Lines
  • 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF

Product Details:

The ATMEGA16A-AU is a 16-bit low power high-performance CMOS Microcontroller is based on the Atmel AVR enhanced RISC architecture. The device features 16kB self-programming flash program memory, 1024B SRAM, 512-byte EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device achieves 16 MIPS throughput at 16MHz at 2.7 to 5.5V operation.By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed. The Atmel AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

1. Advanced RISC architecture – On-chip 2-cycle multiplier
2. High endurance, non-volatile memory segments
3. JTAG (IEEE 1149.1 compliant) interface
4. Peripheral features – Real-time counter with separate oscillator
5. Power-on reset (POR) and programmable brown-out detection
6. Internal Calibrated RC oscillator
7. External and internal interrupt sources
8. Six sleep modes – Idle, ADC noise reduction, power-save, power-down, standby and extended standby
9. 32 Programmable I/O lines
10. Applications: Industrial, Computers & Computer Peripherals

Package Includes:

1 x ATmega 16A U-TH Microcontroller

Product Details:

The ATmega 32A-AU (SMD Package) TQFP-44 PIN Microcontroller is an 8-bit low power, high-performance AVR RISC-based Microcontroller Unit featuring 32kB self-programming flash program memory, 2kB SRAM, 1kB EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug.The device achieves 16 MIPS throughput at 16Mz. By executing powerful instructions in a single clock cycle, the ATmega32A achieves throughputs approaching 1 MIPS per MHz allowing the system designed to optimize power consumption versus processing speed.The core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.Features:

1. Advanced RISC architecture
2. 131 Powerful instructions
3. Fully static operation
4. Up to 16MIPS throughput at 16MHz
5. On-chip 2-cycle multiplier
6. High endurance non-volatile memory segments
7. Optional boot code section with independent lock bits
8. In-system programming by the on-chip boot program
9. True Read-While-Write operation
10. Programming lock for software security

Applications

Automation & Process Control

Package Includes:

1 x ATmega 32A-AU (SMD Package) TQFP-44 PIN Microcontroller

Product Details:

The FT232R is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output and the new FTDIChip-ID?? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.Note: Image may vary from actual product in terms of Brand according to the availability.   Features:

1. Single chip USB to asynchronous serial data transfer interface
2. Entire USB protocol handled on the chip – No USB-specific firmware programming required
3. UART interface support for 7 or 8 data bits, 1 or 2 stop bits & odd/even/mark/space/no parity
4. Fully assisted hardware or X-On / X-Off software handshaking
5. In-built support for event characters and line break condition
6. New USB FTDIChip-ID?? feature
7. New configurable CBUS I/O pins
8. Auto transmit buffer control for RS485 applications
9. Transmit and receive LED drive signals
10. New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA

 

Package Includes:

1 x FT232RL SSOP-28 USB Interface IC

Product Details:

The STM32F103C8T6 LQFP-48 ARM Microcontroller-MCU is a medium density performance line, ARM Cortex-M3 32bit microcontroller in 48 pin LQFP package. It incorporates high-performance RISC core with 72MHz operating frequency, high speed embedded memories, extensive range of enhanced I/Os and peripherals connected to two APB buses. The STM32F103C8T6 features 12bit ADC, timers, PWM timer, standard and advanced communication interfaces. A comprehensive set of power saving mode allows the design of low power applications.The features of STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.Features:

1. Operating voltage range from 2V to 3.6V
2. 64Kbytes of flash memory
3. 20Kbytes of SRAM
4. CRC calculation unit, 96bit unique ID
5. Two 12bit, 1µs A/D converter (up to 10 channels)
6. 7 channel DMA controller, 3 general purpose timer and 1 advanced control timer
7. 37 fast I/O ports
8. Serial wire debug (SWD) and JTAG interfaces
9. Two SPI, two I2C, three USART, one USB and one CAN interfaces
10. Ambient operating temperature range from -40°C to 85°C

Applications:

Embedded Design & Development, Motor Drive & Control, Medical, Portable Devices, Wireless, Industrial, Imaging, Video & Vision, Consumer Electronics, Automotive

Package Includes:

1 x STM32F103C8T6 LQFP-48 ARM Microcontroller-MCU