Raspberry Pi & Accessories

Product Details:

The Raspberry Pi camera module can be used to take high-definition video, as well as stills photographs. It’s easy to use for beginners, but has plenty to offer advanced users if you’re looking to expand your knowledge. There are lots of examples online of people using it for time-lapse, slow-motion and other video cleverness. You can also use the libraries we bundle with the camera to create effects.

 

 

• Small board size: 25mm x 20mm x 9mm
• A 5MP (2592×1944 pixels) Omnivision 5647 sensor in a fixed focus module
• Support 1080p30, 720p60 and 640x480p60/90 video record

Product Details:

Description:Raspberry Pi Foundation has launched a new Product named Raspberry Pi PICO which is very cheaper as compared to other Raspberry Pi Products.Almost one and half-year before Raspberry had launched a revolutionary update on their Single Board Computer (SBC) Pi 3 and become most popular Microcontroller board in the community which is known as a Raspberry pi 4. On the same timeline, the Raspberry pi foundation came with new astonishing SBC named as a Raspberry Pi PICO.
The main highlighted thing about RPI PICO it is the Lowest cost and Smallest size development board from Raspberry pi Foundation ever. On the technical side, it is equipped with RP2040 Microcontroller chip developed by Raspberry Pi Foundation itself. RP400 is their first dual-core ARM Cortex M0+ processor-based latest small-sized, budget-friendly microcontroller.The RP2040 is supported with both c / c ++ and micro-python, meaning that if you're a beginner and want to learn any of these languages, the Raspberry Pico would be the best product-option to start with.
Features of Raspberry Pi Pico:-1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom2. Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz3. 264KB of SRAM, and 2MB of onboard Flash memory4. The castellated module allows soldering directly to carrier boards5. USB 1.1 with device and host support6. Low-power sleep and dormant modes7. Drag-and-drop programming using mass storage over USB8. 26 multi-function GPIO pins9. 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels10. Accurate clock and timer on-chip11. Temperature sensor12. Accelerated floating-point libraries on-chip13. 8 Programmable I/O (PIO) state machines for custom peripheral support

Specifications of Raspberry Pi Pico:-Model Raspberry Pi PICOOperating Voltage (VDC) 1.8 ~ 5.5Processor RP2040 (Dual-core Arm Cortex M0+) By Raspberry PiInterface 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channelsRAM 264 KBGPIO 26 PinsClock Speed 133 MHzOn Board Ports Micro-USB 5V/2.5A DC Power Input PortOperating Temperature Range (C)     -20 to 85Length (mm) 51Width (mm) 21Height (mm) 4 Package Includes:1 x Raspberry PI Pico

Product Details:

This small 3.5-inch touch screen module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal alternative solution for HDMI monitors. The screen also comes with a stylus to interact with the small screen.

Note:

1. To use the LCD with the Raspberry Pi official image, you need drivers. If you are not sure about the drivers, contact us
2. Make sure the hardware connection is correct and connects fine if something seems not right
3. It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC’s USB port may have not enough power to support both Pi and LCD

Features:

1. Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
2. Supports all revision of Raspberry Pi (directly-pluggable models)
3. Works with Raspbian/Ubuntu directly
4. Comes with full set of screws and nuts for assembly
5. 320×480 resolution, better display
6. Lightweight and easy to install

Package Includes:

1 x 3.5″ Touch-Screen LCD Raspberry Pi
1 x Touch Screen Stylus

Product Details:

Description:- <br>This is an armor aluminum alloy case with dual cooling fan designed for the Raspberry Pi 4 Computer Model B. It is a great raspberry pi 4 passive cooling case to help raspberry pi 4 board cooling down. Also a Raspberry Pi 4 Heatsink Case (Raspberry Pi 4 Case) for good heat dissaption. <br>There are two case versions for you to choose, Case A with dual fan, Case B without fan (black color and grey color for your choice). <br>Note: If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink match with silicone grease (recommend Shin-Etsu Shin-tsu X-23-7921-5) for better heat dissaption. <br>Dual Fan<br>Low Power Consumption Design<br>Dual Cooling Expericnce, More powerful heat dissipation<br>Very Quiet Cooling Fan, get rid of the fan noisy<br>Update thermal tapes can make sure good heat conduction effect<br>Fan Noise: 18db<br><br>Specification :- <br>Ultra-thin design<br>Easy to install<br>Fast Heat dissipation<br>Smooth and straight aluminum material<br>All ports and slots of the case can match with Raspberry Pi 4 Computer Model B perfectly<br>Open case design, you don't need to worry it will affect wifi signal any more<br>Reinforced aluminum material, lightweight and durable, long-lasting stainless<br><br>Product Includes:- <br>1 x Raspberry Pi 4 Armor Case with dual fan-Black or Grey1 x Screws Pack1 x Wrench

Product Details:

Description:-
This is an armor aluminum alloy case designed for the Raspberry Pi 4 Computer Model B. It is a great raspberry pi 4 passive cooling case to help raspberry pi 4 board cooling down. Also a Raspberry Pi 4 Heatsink Case (Raspberry Pi 4 Case) for good heat dissaption.
There are two case versions for you to choose, Case A with dual fan, Case B without fan (black color and grey color for your choice).
Note: If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink match with silicone grease (recommend Shin-Etsu Shin-tsu X-23-7921-5) for better heat dissaption.
Important Note:
1.After the test, all three thermal pads can reach and come in contact with the top cover case. We consider that it may be releated with some individual cases, there maybe some errors happened due to mass production.
2.We will pay more attention to the armor case quality checking, please don't worry.


Specification :-
Ultra-thin design
Easy to install
Fast Heat dissipation
Smooth and straight aluminum material
Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable.
All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
Open case design, you don't need to worry it will effect wifi signal any more
Reinforced aluminum material, lightweight and durable, long-lasting stainless


Product Includes:-
1 x Raspberry Pi 4 Armor Case
1 x Screws Pack
1 x Wrench
Description:-
This is an armor aluminum alloy case designed for the Raspberry Pi 4 Computer Model B. It is a great raspberry pi 4 passive cooling case to help raspberry pi 4 board cooling down. Also a Raspberry Pi 4 Heatsink Case (Raspberry Pi 4 Case) for good heat dissaption.
There are two case versions for you to choose, Case A with dual fan, Case B without fan (black color and grey color for your choice).
Note: If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink match with silicone grease (recommend Shin-Etsu Shin-tsu X-23-7921-5) for better heat dissaption.
Important Note:
1.After the test, all three thermal pads can reach and come in contact with the top cover case. We consider that it may be releated with some individual cases, there maybe some errors happened due to mass production.
2.We will pay more attention to the armor case quality checking, please don't worry.


Specification :-
Ultra-thin design
Easy to install
Fast Heat dissipation
Smooth and straight aluminum material
Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable.
All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
Open case design, you don't need to worry it will effect wifi signal any more
Reinforced aluminum material, lightweight and durable, long-lasting stainless


Product Includes:-
1 x Raspberry Pi 4 Armor Case
1 x Screws Pack
1 x Wrench

Product Details:

FeaturesCrystal clear Looks.Access all ports including GPIO port.High Quality ABS plastic used.Heat sink included with it.Suitable for RPi Model B+ and Model 2 (1 Gb version).

Product Details:

Description:This Set of Aluminum Heatsink for Raspberry Pi is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi.This heatsink has adhesive film on the back. It is very easy to mount it on the BGA chip. Just remove the protective film on the back of the heatsink and press it gently to the BGA chip. The heatsink will stick to the BGA chip and cool it.
This Black Heat Sink Set of Aluminum is Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B

Features:1. Set of 4 aluminum heat sinks2. Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B3. These heat sinks have profiles that are short enough to fit within standard Raspberry Pi cases.4. Material: aluminum5. Color: Black
 
Package Includes:1 x Black 4 in 1 Heat Sink Set Aluminum for Raspberry Pi 4B

Product Details:

High-quality ABS constructionRemovable side panels and lid for easy access to GPIO, camera and display connectorsLight pipes for power and activity LEDsExtraordinarily Aesthetic

Additional Information:

• Item Code: RPCS0209

Product Details:

The LCD and Control Board
IPS screen,1280×800 high resolutionCapacitive touch control, supports up to ten-points touchWhen works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver freeWhen work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver freeSupports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian imagesSupports BB Black, comes with Angstrom imageHDMI interface for displaying, USB interface for touch controlSupports 5-level backlight adjustment
The Case
Material : high quality black AcrylicComes with back holder, 30°/45° tilt angleFeatures mounting holes for Raspberry Pi 3B/2B/B+/A+/B, BB Black, Banana Pi
Development Resources
How to install: instruction
 /10.1inch_HDMI_LCD_(B)_(with_case)

Product Details:

Features
800×480 high resolutionResistive touch controlSupports Raspberry PiSupports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian imagesSupports BB Black, comes with Angstrom imageFor other mini-PCs, driver is required and should be developed by usersNot only for mini-PCs, it can work as a computer monitor just like any other general HDMI screenHDMI interface for displaying, USB interface for touch controlBacklight can be turned off to lower power consumptionNote: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cableBB Black: HDMI cable

FAQ
Why the LCD doesn't work with my Raspbian?To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.However, for the first testing, you may want to use our provided image directly.Why the LCD still doesn't work with the Waveshare provided image?Make sure the hardware connection is correct and connects fine.Make sure the image in TF card is burnt correctly.The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.Which power supply should I use?It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.
Development Resources
 /5inch_HDMI_LCD_(B)