Relay

Product Details:

Isolation groove between the control area and the load area Has the power and relay action instructions, pull bright, disconnect does not shineIf the input has signal, the beginning of the common and often will have conductionCan be used as a microcontroller development boardCan be used as a home appliance controlControl DC or AC signalsCan control AC 220V loadNormally open and normally closed contactsBlue KF301 terminal accesses control line is more convenient
Packing list: 1 x Module

Additional Information:

• Item Code: 1C12VRELAY

Product Details:

Isolation groove between the control area and the load area Has the power and relay action instructions, pull bright, disconnect does not shineIf the input has signal, the beginning of the common and often will have conductionCan be used as a microcontroller development boardCan be used as a home appliance controlControl DC or AC signalsCan control AC 220V loadNormally open and normally closed contactsBlue KF301 terminal accesses control line is more convenient
Packing list: 1 x Module

Product Details:

Available in below variants - 
1) Solid Relay Module 1 channel 5v low level trigger
2) Solid Relay Module 2 channel 5v low level trigger
3) Solid Relay Module 4 channel 5v low level trigger

Input section:

DC(+): Positive power supply (by relay voltage power supply). 

DC(-): Connect power negative. 

CH1: 1 relay module signal to trigger the end (high level trigger effective). 

Working current : 12.5mA. 

Trigger voltage : 3.3-5V. 

Trigger current : 2mA. 

Product Details:

This is a 5V 1-Channel Relay interface board, be able to control various appliances, and other equipment with large current. It can be controlled directly by Micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). 
5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic Equipped with high-current relay, AC250V 10A ; DC30V 10A Indication LEDs for Relay output status Equipped with screw holes for easy installation 5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current. Equiped with high-current relay, AC250V 10A ; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LED s for Relay output status. 
Features: 
Size:53mm*28.3mm*19.3mm net wieght : 18g PCB color: black With 4 fixed screw holes , hole diameter 3.1mm, convenient installation and fixation

Product Details:

This is DC To AC SSR-40DA Solid State Relay Module 3-32VDC/24-380VAC 40A. A solid state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays.

One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.

This particular SSR can switch current loads of up to 40A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

1. Model: SSR-25DA
2. Operating Voltage(VDC): 3-32
3. Operating Load Voltage (VAC): 24-380
4. Rated Load Current (A): 25
5. Color  Light Gray

Product Details:

This is DC To AC SSR-40DA Solid State Relay Module 3-32VDC/24-380VAC 40A. A solid state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays.

One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.

This particular SSR can switch current loads of up to 40A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Product Details:

This is DC To AC SSR-25DA Solid State Relay Module 3-32VDC/24-380VAC 25A. A solid state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays.

One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.

This particular SSR can switch current loads of up to 25A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Items: Solid State Relay.
Model: SSR-40 DD.
Input voltage: 3-32VDC.
Output voltage: 5-60VDC.
Output current: 40A.
On voltage: 1V.
One-off Time: 10ms.
Off leakage Current: 2mA.
Weight: 0.106kg.

Product Details:

Description:              The Songle Single-channel 5V 30A Relay Module power failure relay is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Ardiuno, AVR, PIC, ARM any other microcontroller operating at 5V.The relay module uses an authentic quality mechanical relay and the industry’s top quality subminiature two-way isolation optical coupling which gives you the strong anti-interference ability, and stable performance.The user can choose the relay control level, can be a high level off, also can be low level and off. The Songle Single-channel 5V 30A Relay Module Power Failure Relay contains a limited flow resistance, can directly use the power supply is negative control, you can also use the MCU I/O control.The relay module equips a power indicator light RED, 1 road relay status indicator light BLUE.With this relay, you can easily control electrical appliances, lights, etc.Fault-tolerant design, even if the control line is breakes, the relay will not move.Module interface :1. DC+: DC power supply positive pole2. DC-: DC power supply negative pole3. IN: signal triggering pin4. JD+: relay control voltage positive5. JD-: relay control voltage negative________________________________________Features :1. Optical coupling isolation, driving ability is strong, stable performance; Trigger current is 5mA2. The module can be set high level or low-level trigger by the jumper3. Rated current of the interface is 16A4. DC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal.5. High and low-level trigger mode selection. Jumper and L pin connection, IN pin, is low-level triggerJumper and H pin connection, IN pin, is the high-level trigger.

Product Details:

It is 6-30V 1-Channel Delay Power Relay Module with Onboard Adjustable Timing Cycle Switches with Digital LED display It is mostly used in Home Automation Delay Timer Control Switch Module Timer Controller. The Module operates at Operating voltage range of 6-30V, also it supports micro USB 5.0V power supply.  Output capability: Can control the device within DC 30V 5A or AC 220V 5A. It can be applied to many fields as there is a wide range of application.
 Features:Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will be in memory forever.Wide voltage power supply (6 ~ 30V), supports micro USB 5.0V power supply, easy to use.The interface is clear, simple, powerful and easy to understand, can meet almost all your needs.With emergency stop function (“STOP” button) and reverse polarity protection which can avoid burning by reverse connection.Adding sleeping mode, when the mode is enabled, if there is no operation within 5 minutes, the display will be turned off automatically, press any button will wake it up;You can set different parameters of OP, CL, LOP, which are independent of each other and are stored separately;All the parameter settings will be stored automatically when power is off.
Package Includes:1 x 6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle

Product Details:

This is a Single pole double throw (SPDT) type relay with 5 pins in a cube type package and rated to work at 5VDC.
Load Current Max.: 7Amps 250V AC or 12Amps 24V DC.
Coil Resistance: 65-75 Ohms.

Product Details:

Product Specification Product DescriptionT-type Relay is our speciality since we are trading in this product since 30 years, we can supply at very good prices with the best quality assurance.

We deal in a big range and variety of PCB Mounting T-type Relays.

We can provide most of the items with instant delivery and if any odd part number then we can also import for our valuable customers.

If any requirement kindly revert back with your enquiries.

Product Details:

Description

• 100% Brand new and high quality
• Compact, lightweight, and durable
• Control(coil) Voltage: 5V
• Pin: 5Pin
• Load voltage/Current: 7A 250V 10A 30VDC/10A 125VAC 10A28VDC
• Application: Modules, Development board, Connector, Cables & Adapters, DIY PCB Universal Board, IC Sockets
• Quantity: 10pcs
• Color: Blue HL Make or as per availability
• Size: Approx. 1.8 x 1.5 x 1.6cm (L*W*H)

Product Details:

It is a 24V Subminiature DPDT Relay. The relay has 2 bifurcated contacts, which makes this a dual-channel relay with a single coil. The relay has a  2 Form C configuration.

Features:

1. 2 Form C configuration.
2. High switching capacity: 125VA/60W.
3. Bifurcated contacts.
4. Epoxy-sealed.
5. Class A insulation system.

Product Details:

• Telecom DPDT Relay
• Coil Votlage: 5V
• Contact Rating (Current): 2A
• Switching Voltage: 220VDC-Max
  
  
• The 5V 2A Telecom Relay has high current capacity. It has contact rating of 2A @ 30V DC. The breakdown voltage between contact and coil is also very high. It requires very less power for operating.

Product Details:

Product DescriptionTelecom Relay

HFD27 Series Hongfa (5V / 12V / 24V)

HFD27/005-S --- 5V/2A DPDT (2 Form C) 8-PIN

HFD27/012-S --- 12V/2A DPDT (2 Form C) 8-PIN

HFD27/024-S --- 24V/2A DPDT (2 Form C) 8-PIN

HONGFA is world''s second best brand in Relay Manufacturering Industry

We stock 5V / 12V / 24V Hongfa Telecom Relays in our regular inventory.We can supply this item in bulk and at very good price.If any requirement kindly revert back with your enquiries.

Product Details:

SE-MY4N Relay

14 pin relay
Terminal layout 4z

Contact capacity-
Ac-3a 250v
Dc-3a 30v

Contact resistance-
≤50mω

Insulation resistance-
≥100mω

Dielectric strength-
Boc-1000vac
Bcc-1500vac

Coil nominal voltage-
Ac-6-240v
Dc-6-220v

Coil nominal power-
Ac 0.9va-1.2va
Dc ≤0.9w

Operating
Temperature -40c~+60c

Mounting method-
Printed circuit board,outlet.

Product Details:

Product Details:

Product Description

Electro Automation Industries is Leading Wholesaler and Dealer of Omron Relay 

Availble in 6V/12V/24V/36V/48V/220V AC/DC

MY2N 8Pin Relay
MY3N 11Pin Relay
MY4N 14Pin Relay
LY2N 8Pin Relay
LY3N 11Pin Relay
LY4N 14Pin Relay
MK2PN 8Pin Relay
MK3PN 11Pin Relay
G2R1 5Pin Relay
G2R2 8Pin Relay
SN G2R1 5Pin Relay
SN G2R2 8Pin Relay
WJQX-30F 1Changeover 30A 24VDC/12VDC/220VAC
WJQX-30F 2Changeover 30A 24VDC/12VDC/220VAC
WJQX-40F 1Changeover 40A 24VDC/12VDC/220VAC
WJQX-40F 2Changeover 40A 24VDC/12VDC/220VAC
WJQF-38F 3Changeover 40A 24VDC/12VDC/220VAC
WJQX-59F 1Changeover 40A 24VDC/12VDC/220VAC
WJQX-60F 1Changeover 60A 24VDC/12VDC/220VAC
WJQX-60F 2Changeover 60A 24VDC/12VDC/220VAC
WJQF-62F 1Changeover 80/100/120 A 24VDC/12VDC/220VAC
WJQF-62F 2Changeover 808/100/120 A 24VDC/12VDC/220VAC

MY2N Omron Relay 8 Pin

Volatge Available 12V / 24V / 36V / 48V / 110 V / 220 VAC/DC

Relay Series Model MY2N , MY3N , MY4N , LY2N , LY3N , LY4N , MK2PN , MK3PN , K2PN , K3PN

Relay Pin Available 8 Pin , 11 Pin , 14 Pin

Brand Name Omron Relays and Schneider Relay

Other Series WJQX-30F, WJQX-30F , WJQX-40F , WJQF-38F , WJQX-59F , WJQX-60F , WJQX-62F ,

 

Product Details:

Product Specification

Product Details:

It is an SLA-05VDC-SL-A 4Pin 30A Power Relay. The relay is switched with the help of a small signal from a microcontroller like an Arduino. This relay can be used to drive 30A devices.

Package Includes:

1 x SLA-05VDC-SL-A 4Pin 30A Power Relay.

Product Details:

This is DC To DC SSR-100DD Solid State Relay Module 3-32VDC/5-200VDC 10A. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

This particular SSR can switch current loads of up to 10A with a 5-200VDC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Rated Load Current (mA):100A
2. Dielectric Strength:Over 2.5kVA / 1 min
3. Trigger Voltage (VDC):3-32VDC
4. Switching Voltage (VDC):5-200
5. Operating Temperature Range (C):-20 to 85
6. Material:ABS
7. Length (mm):45.5
8. Width (mm):62.5
9. Height (mm):24
10. Weight (gm):93

Product Details:

SSR-25 DD 12A DC-DC Solid State Relay 5V-60VDC output description

 

TheDC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 12A.
It has a long operating life and high reliability, a compact size. This relay switches very quickly.

SSR-25 DD 12A DC-DC Solid State Relay 5V-60VDC output features:

• - Input voltage: 3-32 VDC
• - Charging voltage: 5-60 VDC
• - Output current: 12A
• - Control mode: DC-DC
• - State leakage current: ‰ ¤4mA / ‰ ¤2mA
• - Shutdown time: ‰ ¤ 10 ms
• - dielectric resistance: 2500VAC / 1 min
• - Insulation force: 50M Ω / 500VDC
• - Insulation temperature: -20 ° C - + 80 ° C
• - Housing material: intensive ABS
• - CE certified
• - Operating signal: LED light
• - Weight: 105g 

Product Details:

This is DC To DC SSR-80DD Solid State Relay Module 3-32VDC/5-60VDC 10A. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

This particular SSR can switch current loads of up to 10A with a 5-60VDC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Rated Load Current (mA):100A
2. Dielectric Strength:Over 2.5kVA / 1 min
3. Trigger Voltage (VDC):3-32VDC
4. Switching Voltage (VDC):5-60
5. Operating Temperature Range (C):-20 to 85
6. Material:ABS
7. Length (mm):45.5
8. Width (mm):62.5
9. Height (mm):24
10. Weight (gm):93

Product Details:

This is DC To DC SSR-100DD Solid State Relay Module 3-32VDC/5-200VDC 10A. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

This particular SSR can switch current loads of up to 10A with a 5-200VDC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Rated Load Current (mA):100A
2. Dielectric Strength:Over 2.5kVA / 1 min
3. Trigger Voltage (VDC):3-32VDC
4. Switching Voltage (VDC):5-200
5. Operating Temperature Range (C):-20 to 85
6. Material:ABS
7. Length (mm):45.5
8. Width (mm):62.5
9. Height (mm):24
10. Weight (gm):93

Package Includes:

1 x 5-200V SSR-100DD Solid State Relay

Product Details:

This is DC To AC SSR-10DA Solid State Relay Module 3-32VDC/24-380VAC 10A. A solid-state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry. Solid-state relays have several advantages over mechanical relays.

One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid-state relays can be switched much faster and for much longer periods without wearing out.

This particular SSR can switch current loads of up to 10A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features :

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Package includes :

1 x DC To AC SSR-10DA Solid State Relay Module 3-32 VDC /24-380VAC 10A

Product Details:

DescriptionFeatures: - Item Name: 50A SSR-50DA solid state relay - Transparent Lid is included Input Voltage: 3-32VDC Output Voltage: 24-380VAC Output Current: 50A On Voltage: <=1V One-Off Time: <=10ms Off Leakage Current:<=2mA Product Size(L x W x H): 62 x 44 x 23mm / 2.44 x 1.73 x 0.91in Weight: 115g / 4.06ozPackage Weight: 80 G / 2.82 Ounces Package Dimensions (L*W*H): 120*80*30 MM / 4.72*3.15*1.18 InchesPackage Include: 1 x 50A SSR-50DA Solid State Relay

Features: - Item Name: 50A SSR-50DA solid state relay - Transparent Lid is included Input Voltage: 3-32VDC Output Voltage: 24-380VAC Output Current: 50A On Voltage: <=1V One-Off Time: <=10ms Off Leakage Current:<=2mA Product Size(L x W x H): 62 x 44 x 23mm / 2.44 x 1.73 x 0.91in Weight: 115g / 4.06ozPackage Weight: 80 G / 2.82 Ounces Package Dimensions (L*W*H): 120*80*30 MM / 4.72*3.15*1.18 Inches

Package Include: 1 x 50A SSR-50DA Solid State Relay

Product Details:

This is AC To AC SSR-25AA Solid State Relay Module 80-250VAC/24-380VAC 25A. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

This particular SSR can switch current loads of up to 25A with an 80-250VAC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Rated Load Current (mA):25A
2. Dielectric Strength:Over 2.5kVA / 1 min
3. Trigger Voltage (VAC):80-250
4. Switching Voltage (VAC):24-380@25A
5. Operating Temperature Range (C):-20 to 85
6. Material:ABS
7. Length (mm):45.5
8. Width (mm):62.5
9. Height (mm):24
10. Weight (gm):93

Package Includes:

1 x 80-250V SSR-25AA Solid State Relay

Product Details:

This is AC To AC SSR-40AA Solid State Relay Module 80-250VAC/24-380VAC 100A. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

This particular SSR can switch current loads of up to 100A with an 80-250VAC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Rated Load Current (mA):40A
2. Dielectric Strength:Over 2.5kVA / 1 min
3. Trigger Voltage (VAC):80-250
4. Switching Voltage (VAC):24-380@100A
5. Operating Temperature Range (C):-20 to 85
6. Material:ABS
7. Length (mm):45.5
8. Width (mm):62.5
9. Height (mm):24
10. Weight (gm):93

Package Includes:

1 x 80-250V SSR-40AA Solid State Relay

Product Details:

This is AC To AC SSR-100AA Solid State Relay Module 80-250VAC/24-380VAC 100A. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

This particular SSR can switch current loads of up to 100A with an 80-250VAC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Rated Load Current (mA):100A
2. Dielectric Strength:Over 2.5kVA / 1 min
3. Trigger Voltage (VAC):80-250
4. Switching Voltage (VAC):24-380@100A
5. Operating Temperature Range (C):-20 to 85
6. Material:ABS
7. Length (mm):45.5
8. Width (mm):62.5
9. Height (mm):24
10. Weight (gm):93

Package Includes:

1 x 80-250V SSR-100AA Solid State Relay

Product Details:

This is an   SSR-100VA Solid State Relay Module 500Ω/24-380VAC 100VA. A solid-state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.

The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor, silicon-controlled rectifier, or MOSFET transistor to switch the load.

In this Particular SSR, the power output is controlled by the trigger angle of the triac with the variable resistor of 500KΩ. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.

Features:

1. Long service life and high reliability
2. Reduced electromagnetic interference
3. Highly reliable, compact size designed to offer users maximum simplicity.

Specifications:

1. Dielectric Strength:Over 2.5kVA / 1 min
2. Trigger resistance: 500 KΩ
3. Switching Voltage (VAC):24-380
4. Operating Temperature Range (C):-20 to 85
5. Material:ABS
6. Length (mm):45.5
7. Width (mm):62.5
8. Height (mm):24
9. Weight (gm):93

Package Includes:

1 x 24-380V SSR-100VA Solid State Voltage Regulator Relay