Bombay Electronics
Grant Road, Mumbai, Maharashtra
GST No. 27AABPC5348L1ZO
TrustSEAL Verified
Call 0804896970561% Response Rate
SEND EMAIL
Product Details:
| Brand | HI-HLK |
| Frequency | 50 - 60 Hz |
| Input Voltage | 100 - 240 VAC |
| Power Source | Electric |
| Output Voltage | 5 VDC |
| Wattage | 5 W |
Product Details:
| Long-term reliability | MTBF 100000h |
| Load rated output voltage | +5+-0.1 |
| Short-term maximum output current | 1000mA |
| The maximum output current for a long time | 600 mA |
| AC Input Voltage Range | 90 - 264V |
| Input Low Voltage Efficiency | Vin=110VAc, Output full-load: 69% |
| Input High Voltage Efficiency | Vin=220VAc, output full-load: 70% |
| HLK-PM01 5V/3W Switch Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 3 Watt. This makes it perfect for small projects that needs a 5 volt supply from mains. There are many advantages for these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc. This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries. Specifications - AC Input Voltage Range - 90 ~ 264V Input Low Voltage Efficiency - Vin=110VAc, Output full-load: 69% Input High Voltage Efficiency - Vin=220VAc, output full-load: 70% Long-term reliability - MTBF 100000h Load rated output voltage - +5±0.1 Short-term maximum output current - 1000mA The maximum output current for a long time: 600mA Operating Temperature: -20 to +60°C Store Temperature : -40 to +80°C Relative humidity : 5 to 95% Rated input voltage : 100-240VAc Maximum input current : <0.2A Input current surge : <10A Dimensions in mm (LxWxH) : 33 x 19 x 15 Weight(gm) : 22 Features: Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 90 ~ 264V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test Low power consumption, environmental protection, no-load loss <0.1W |
Product Details:
| Relative Humidity | 5 to 95% |
| Atmospheric pressure | 80 to106Kpa |
| Rated input voltage | 100-240VAc |
| All voltage input | AC: 90 - 264V |
| Operation Temperature | -20 to +60 DegreeC |
| Store Temperature | -40 to +80 DegreeC |
| HLK-PM03 Hi-Link 3.3V 3W AC to DC Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 3.3V DC from 120V AC – 230V AC and has a power rating of 3 Watt. This makes it perfect for small projects that needs a 3.3 volt supply from mains. There are many advantages for these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc. This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries. Features of HLK-PM03 Hi-Link - 3.3V 3W - AC to DC Power Supply Module :- Ultra-thin, ultra-small All voltage input (AC: 90 ~ 264V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test Low power consumption, environmental protection, no-load loss <0.1W Environmental conditions of HLK-PM03 Hi-Link - 3.3V 3W - AC to DC Power Supply Module :- Operation Temperature: -20 to +60°C Store Temperature : -40 to +80°C Relative humidity : 5 to 95% Atmospheric pressure : 80 to106Kpa Electrical Characteristics of HLK-PM03 Hi-Link - 3.3V 3W - AC to DC Power Supply Module:- Input characteristics (test at room temperature 20 ???). Rated input voltage : 100-240VAc Input voltage range : 90-264VAc Maximum input current : ≤0.2A Input current surge : ≤10A Maximum input voltage : ≤270VAc Enter slow start : ≤50 mS Input Low Voltage Efficiency : Vin=110VAc???Output full-load≥69% Input High Voltage Efficiency : Vin=220VAc???output full-load≥70% Long-term reliability: MTBF≥100???000h Load rated output voltage : +3.3±0.1VDc Full rated output voltage : +3.3±0.2 VDc Short-term maximum output current : ≥1200mA The maximum output current for a long time : ≥1000mA Voltage Regulation : ±0.2 % Load Regulation : ±0.5 |
Product Details:
| Input current surge | 10A |
| maximum input voltage | 270 VAc |
| Vibration | Vibration coefficient 10- 500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes |
| Rated input voltage | 100-240 VAc |
| Input voltage range | 90-264 VAc |
| Maximum input current | 0.2 A |
| HLK-PM12 Hi-link 12V 3W - AC to DC Power Supply Module from Hi-Link is a PCB mounted plastic enclosed isolated switching step down power supply module. It can supply 12V DC from 120V AC- 230V AC and has a power rating of 3 watt. Its ultra compact size makes it perfect to use in places where size is a constraint and that needs a 12 volt supply from mains. This module replaces lots of parts from the traditional power supply like diodes, voltage regulator, transformer. This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. There are many advantages for this module, such as low temperature rise, low power, high efficiency, high reliability, high security isolation etc. It is widely used in smart home, automation and control, communication equipment, instrumentation and other industries. Features of HLK-PM12 Hi-link 12V 3W - AC to DC Power Supply Module:- Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 90 ~ 264V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test Low power consumption, environmental protection, no-load loss <0.1W Environmental conditions of HLK-PM12 Hi-link 12V 3W - AC to DC Power Supply Module:- Technical indicators: Single bit Working temperature: – 20-60 °C Storage temperature: -40-80 °C Relative humidity: 5-95% The cooling way: Natural cooling The atmospheric pressure: 80-106Kpa The altitude: 2000M or less. Specifications of HLK-PM12 Hi-link 12V 3W - AC to DC Power Supply Module:- 100% load aging and testing Vibration : Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes Rated input voltage : 100-240 VAc Input voltage range : 90-264 VAc Maximum input current : ≤0.2 A Input current surge : ≤10 A maximum input voltage : ≤270 VAc Enter slow start : ≤50 mS Input Low Voltage Efficiency : Vin=110VAc Output full-load≥69 % Input High Voltage Efficiency : Vin=220VAc output full-load≥70 % Long-term reliability : MTBF≥100,000 h Load rated output voltage : +12±0.1 VDc Full rated output voltage : +12±0.2 VDc Short-term maximum output current : ≥1000 mA The maximum output current for a long time : ≥600 mA Voltage Regulation : ±0.2 % Load Regulation : ±0.5 % Dimensions of HLK-PM12 Hi-link 12V 3W - AC to DC Power Supply Module:- Weight: 32 gm Size: 38 * 23 * 18 mm |
Product Details:
| Rated input voltage | 100-240 VAc |
| Input voltage range | 90-264 VAc |
| Maximum input current | 0.2 A |
| Input current surge | 10A |
| maximum input voltage | 270 VAc |
| Enter slow start | 50 mS |
Product Details:
| Maximum input current | 0.2 A |
| Input current surge | 10 A |
| maximum input voltage | 270 VAc |
| Enter slow start | 50 mS |
| Rated input voltage | 100-240 VAc |
| Input voltage range | 90-264 VAc |
| Rated input voltage 100-240 VAc Input voltage range 90-264 VAc Maximum input current ≤0.2 A Input current surge ; ≤10 A maximum input voltage ≤270 VAc Enter slow start ≤50 mS Input Low Voltage Efficiency Vin=110VAc,Output full-load≥69 % Input High Voltage Efficiency Vin=220VAc,output full-load≥70 % Long-term reliability MTBF≥100,000 h Load rated output voltage +12±0.1 VDc Full rated output voltage 12±0.2 VDc Short-term maximum output current ≥540mA The maximum output current for a long time ≥450 mA Voltage Regulation ±0.2 % Load Regulation ±0.5 % Output ripple and noise (mVp-p) ≤50 Rated input voltage, full load. Using 20MHz of bandwidth, The load side 10uF and 0.1uF capacitor to be tested. mV Switch overshoot amplitude (Rated input voltage and output load plus 10%)≤5 %VO Output over-current protection 150-200% of the output maximum load A Output short circuit protection Direct short circuit at the normal output, automatically resume normal operation after a short circuit removal |
Product Details:
| Relative Humidity | 5-95% |
| Storage Temperature | -40-80 deg Celsius |
| All voltage input | AC: 100 ~ 240V |
| Working temperature | -25-60 deg Celsius |
| Heat Dissipation Mode | Natural cooling |
| The atmospheric pressure | 80-106Kpa |
| Description:-<br> HLK-PM24 3W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 24V DC from 100V AC – 240V AC and has a power rating of 3 Watt. This makes it perfect for small projects that need 24 volt supply from mains. There are many advantages to these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation, etc. <br> This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation, and other industries. <br><br> Features: <br> 1. Ultra-thin, ultra-small<br> 2. All voltage input (AC: 100 ~ 240V) <br> 3. Low ripple and low noise<br> 4. Output overload and short circuit protection<br> 5. High efficiency, high power density<br> 6. The product is designed to meet the requirements of the EMC and Safety Test<br> 7. Low power consumption, environmental protection, no-load loss <0.1W<br> Environmental conditions: <br> 1. Technical indicators: Single bit<br> 2. Working temperature: -25-60 deg Celsius<br> 3. Storage temperature: -40-80 deg Celsius<br> 4. Relative humidity: 5-95%<br> 5. Heat Dissipation Mode: Natural cooling<br> 6. The atmospheric pressure: 80-106Kpa. <br><br> Package Includes: <br> 1 xHLK-PM24 24V/3W Switch Power Supply Module<br> |
Product Details:
| Output Current(mA) | 2200 |
| Working Temp(C) | 25 +60 |
| Output Power(W)v | 20 |
| Output Type | Single |
| Input Voltage(V) | 100-240 |
| Output Voltage(V) | 9 |
The 20W ultra-small series power supply module is a small volume, high-efficiency power module for customers designed by Hi-Link. It has the advantage of the global input range, low-temperature rise, low power consumption, high efficiency, high reliability, etc. It has been widely used in smart homes, automation control and other industries.
This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation, and other industries.
Product Details:
| Input Voltage(V) | 100-240 |
| Output Voltage(V) | 12 |
| Output Current(mA) | 1600 |
| Working Temp(C) | 25 +60 |
| Output Power(W) | 20 |
| Output Type | Single |
The 20W ultra-small series power supply module is a small volume, high-efficiency power module for customers designed by Hi-Link. It has the advantage of the global input range, low-temperature rise, low power consumption, high efficiency, high reliability, etc. It has been widely used in smart homes, automation control and other industries.
This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation, and other industries.
Product Details:
| Output Type | Single |
| Input Voltage(V) | 100-240 |
| Output Voltage(V) | 3.3 |
| Output Current(mA) | 600 |
| Working Temp(C) | 25 +60 |
| Output Power(W) | 2 |
| HLK-2M03 Hi-Link 3.3V 2W AC to DC Power Supply Module |
Product Details:
| Output Voltage(V) | 12 |
| Output Current(mA) | 170 |
| Working Temp(C) | 25 +60 |
| Working Humidity | 5-95 |
| Output Power(W) | 2 |
| Output Type | Single |
| Input Voltage(V) | 100-240 |
The 2W ultra-small series power supply module is a small volume, high-efficiency power module for customers designed by Hi-Link. It has the advantage of the global input range, low-temperature rise, low power consumption, high efficiency, high reliability, etc. It has been widely used in smart homes, automation control and other industries.
This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation, and other industries.
Features: