Product Details:
Model Name/Number | 4 Series 40A 18650 Lithium Battery Protection Board |
Weight | 9.3g |
Charging Current | : 16.8V - 18.1V. |
Nominal voltage | 3.6V, 3.7V lithium battery |
Strictly according to map wiring | 0V, 4.2V, 8.4V, 12.6V, 16.8V |
balanced current | 40A, 100mA |
Product Details:
Capacity | 10uF-100uF |
Nominal voltage of | 3.6V, 3.7V lithium battery |
power battery, | 15C-20C |
Strictly according to map wiring | 0V, 4.2V, 8.4V, 12.6V, 16.8V |
withstand voltage above | 25V |
size of approx | 46 x 60 x 3.4 mm |
Product Details:
Rated voltage of polymer battery | 10.8V |
18650 or 3.7V lithium battery rated voltage | 11.1V |
Lithium battery full charge voltage | 12.6V |
maximum working current | 2AH * 3 = 6A |
charge voltage | 12.6V |
maximum operating current | 2AH*1=2A.3C ratio of the battery |
Product Details:
Operating current | 6 8A. |
Current limit | 10 13A. |
Storage condition | 40 80 |
Resting current | less than 30uA |
Effective lifetime | over 30000 hours |
Internal resistance | less than 100m |
Product Details:
Operating current | 6 - 8A. |
Current limit | 10 - 13A. |
Storage condition | 40 80 |
Resting current | less than 30uA |
Internal resistance | less than 100mm |
strictly according to the drawing wiring | 0 V (B), 3.7 V (B1), 7.4 V (B2), 11.1 V (B +), not intentionally short circuit |
Product Details:
Supply Voltage | 14.8V/16.8V. |
Dissipation Power | 18650 Lithium Battery Balanced Function Board |
Operating Temperature | Discharge Shunt balanced 4.2V 66mA |
18650 Lithium Battery Balanced Function Board. | 14.8V/16.8V |
B1 connects the battery 1 | with the contact in battery 2. |
B2 connects the battery 2 | with the contacts in the battery 3. |
B3 Connect the battery 3 | to the contact in the battery 4. |
Product Details:
Overcharge detection voltage | 4.25 + 0.05V. |
Over charge release voltage | 4.23 + 0.05V |
discharge detection voltage | 2.45 + 0.1V. |
Ceiling continuous current | 12A. |
Overcurrent detection current | 15A. |
Input Charging voltage | 4.2V |
IC components | DW01+8205A. |
Product Details:
Model Name/Number | Protection Board Battery Charging Module |
nominal voltage | 14.4V |
lithium battery pack | 14.8V |
lithium battery pack | 16.8V |
Overcharge release voltage | 4.15 +- 0.05V. |
Over-discharge termination voltage | 3 +- 0.1V. |
Working current | 15A |
natural cooling | 10A |
plus the heat sink | 15A |
maximum instantaneous current | 30A |
Working temperature | 40~+85 degrees |
Product Details:
LED light | 1W fish eye |
Connected to the battery positive | B + |
Connected battery negative | B - |
Connect the battery 1 to the connection point before battery 2 | MB |
Charge / discharge side positive (shared charge / discharge side) | P + |
Connection / discharge terminal negative (charge / discharge side shared) | P - |
Product Details:
Over-Discharge Detection Voltage | 2.3-3.0V 0.05V. |
Maximum Working Current | 3A |
Transient Current | 5A |
Operating Temperature | 40-50 C. |
Internal Resistance | Less than 45m |
B+ B- | The interface of battery core. |
Product Details:
Output current up | 3A |
efficiency up | 95% |
Working Temperature | -20 DegreeC~70 DegreeC |
Output Port | USB or Expansion port |
Output Parameters | 5V/3A or 3V/1A |
Conversion Efficiency | up to 95% (high conversion rate) |
Product Details:
Single section over charging sensing voltage | 4.18- / 4.22V |
Over-charging recovery voltage | 4.05-4.15 |
Overcharge detection delay | 0.5 / 1.0 / 2.0S |
Single section discharge detection voltage | 2.75-2.85V |
Over discharge recovery voltage | 2.90-3.20V |
Discharge detection delay | 0.5-2.0S |
Product Details:
Maximum Working Current | 5A |
Transient Current | 7A |
Operating Temperature | 40 50 C |
Internal Resistance | Less than 45m |
B+ B | The interface of battery core. |
P+ P- | The connector of the battery board. |
Product Details:
FOR Li-POLYMER LiMnO Protect Parameter | 3.6V 3.7V |
Single cell battery overcharge protect voltage | 4.21-4.29 V |
Single cell battery overcharge protect recover voltage | 4.14-4.24 V |
Overcharge protect delay | 1.5-2.5S |
Single cell battery over-discharge protect voltage | 2.72-2.88 V |
Single cell battery over-discharge protect recover voltage | 2.9-3.1 V |
Product Details:
FOR Li-POLYMER LiMnO Protect Parameter | 3.6V 3.7V |
Single cell battery overcharge protect voltage | 4.21-4.29 V |
Single cell battery overcharge protect recover voltage | 4.14-4.24 V |
Overcharge protect delay | 1.5-2.5S |
Single cell battery over-discharge protect voltage | 2.72-2.88 V |
Single cell battery over-discharge protect recover voltage | 2.9-3.1 V |
Over charge protective current | 100 mA |
Product Details:
Display indication | 25 |
first light is on(voltage | 3.4V 50 |
second light is on (voltage | 3.6V 75 |
third light is on (voltage | 3.8V 100 |
fourth light is on (voltage | 4V |
The intelligent | power display panel |
Product Details:
Display indication | 25 |
first light is on(voltage | 6.6v 50 |
second light is on (voltage | 7V 75 |
third light is on (voltage | 7,5V 100 |
fourth light is on (voltage | 8V |
The intelligent | power display panel |