Bombay Electronics
Bombay Electronics
Grant Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Sensor & Module - InPut

We are a leading Manufacturer of yf-s403 3/4" water flow meter hall sensor, load cell weighing sensor scale - 5kg, split- core switching type current transformer, tcrt5000 sensor, ultra-sonic distance ranging detector and dn25 yf-g1 large flow water sensor from Mumbai, India.

YF-S403 3/4" Water Flow Meter Hall Sensor

YF-S403 3/4 Water Flow Meter Hall Sensor
  • YF-S403 3/4 Water Flow Meter Hall Sensor
Get Best Quote
Approx. Price: Rs 699 / PieceGet Latest Price

Product Details:

Working Temperature80
Load Capacity10 mA (DC 5V)
Maximum Operating Current15 mA DC 5 V
Working Voltage RangeDC 5 - 18 V
Working Humidity Range35%-90% RH (no frost)
Allow Pressure1.75Mpa

Water flow sensor is mainly consists of plastic valve body, rotor assembly and hall current sensor. It is installed in the hot water inlet end for detecting water flow. When water through the flow rotor assembly, magnetic rotor will rotate and Speed will change as the flow change. Hall current sensor output corresponding pulse signal and feedback to controller, then the controller will control the flow. Can be used for water heaters, credit card machines, water vending machine, flow measurement device.

Features
- Light weight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- Seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Mounted vertically, should not exceed 5 degrees inclination.
- Temperature of medium should not exceed 120 .

Cord Connection
- Red Positive(+)
- Yellow Signal output.
- Black Negative(-)

Specifications
- The lowest rated working voltage DC 4.5 5V - 24V.
- Storage temperature -25 - + 80 ° c
- Save Humidity 25% - 95% RH
- Flow range 1-60L / min
- External thread 3/4 "
- Size Approx 6.2 * 3.5 * 4.1 cm
- Output interface diameter Ca. Outside 26mm, inside 12mm, 14mm.
Request
Callback


Additional Information:

  • Item Code: YFS40312
Yes! I am Interested

Load Cell Weighing Sensor Scale - 5KG

Load Cell Weighing Sensor Scale - 5KG
  • Load Cell Weighing Sensor Scale - 5KG
Get Best Quote
Approx. Price: Rs 325 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Rated Output1.0 - 0.1mV / V
Dimensions75x12.7x8mm/2.95 x 0.51 x 0.31"(L W H)
Range5 kg
ModelYZC-131A
Rated Load2 kg
Nonlinear0.05% F.S

Description
The full-bridge structure, the four leads, easy to use, plus driving voltage 5-10V, force changes in the output voltage signal directly.
Wiring: red voltage + E, black line voltage -E, green line signals + S, the white line signal -SThe sensor is fixed at one end through the screw hole, and the other end left floating state, applied according to label directions direction of gravity. In particular, note that you must not directly push the white plastic cover part, in order to avoid damage of the sensor.

Specification:
Hysteresis: 0.0% F.S
Repeatability: 0.05% F.S
Creep (5 minutes): 0.05% F.S
Temperature Effect on Output: 0.003% F.S /°C
Zero output: ± 0.2 mV / V
Input impedance: 1050 ± 10% Ω
Output impedance: 1000 ± 10% Ω
Insulation resistance: ≥2000 MΩ
Operating temperature range: -21 ~ 40°C
Recommended for: kitchen scales
Weight:21g
Request
Callback


Additional Information:

  • Item Code: LDCL005KG
Yes! I am Interested

Split- Core Switching Type Current Transformer

Split- Core Switching Type Current Transformer
  • Split- Core Switching Type Current Transformer
Get Best Quote
Approx. Price: Rs 799 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Opening Size13 x 13 mm
Leading CableLength - 1 meter
OutputStandard 3.5mm Audio Jack with three core (TRS) plug
Core MaterialFerrite
Work Temperature25 to +70

Split Core Current Transformer
The non-invasive AC Current Sensor (100A max - Model SCT-013-000) has no internal burden resistor, but a transient voltage suppressor limits the output voltage in the event of accidental disconnection from the burden. It is capable of developing sufficient voltage to fully drive a 5V input.

Characteristic Specifications
Opening Size (in mm) : 13 x 13
Non-Linearity : ±3 % (10 to 120% of rated input current)
Leading Cable : Length - 1 meter
Output - Standard 3.5mm Audio Jack with three core (TRS) plug
Core Material : Ferrite
Mechanical Strength : the number of switching is not less than 1000 times (test at 25?)
Safety Index : Dielectric strength (between shell and output) 1000V AC/min
Fire resistance property: In accordance with UL94-Vo
Switching Angle : 180°
Request
Callback
Yes! I am Interested

TCRT5000 Sensor

TCRT5000 Sensor
  • TCRT5000 Sensor
Get Best Quote
Approx. Price: Rs 30 / PieceGet Latest Price

Product Details:

Package TypeLeaded
Detector TypePhoto transistor
Dimensions L W H10.2 x 5.8 x 7
Peak Operating Distance2.5 mm
Operating Range Within20 % relative collector current 0.2 mm to 15 mm

DESCRIPTION

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version

Features

Typical output current under test: IC = 1 mA
Daylight blocking filter
Emitter wavelength: 950 nm
Lead (Pb)-free soldering released
Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC

Applications

Position sensor for shaft encoder
Detection of reflective material such as paper, IBM cards, magnetic tapes etc.
Limit switch for mechanical motions in VCR
General purpose - wherever the space is limited DESCRIPTION
Request
Callback
Yes! I am Interested

Ultra-Sonic Distance Ranging Detector

Ultra-Sonic Distance Ranging Detector
  • Ultra-Sonic Distance Ranging Detector
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Detection Distance2 cm - 450 cm
Sensor AngleLess than 15 degrees
Working voltageDC 5V
Quiescent current2mA
Level output5V High 0V Low

Features

  • Stable performance
  • Measure the distance accurately
  • Precision: Blind (2cm) super close
  • Parameters
  • High: up to 0.3cm
  • Connection mode: VCC, trig (control side), echo (receiving end), GND
Request
Callback


Additional Information:

  • Item Code: HC-SR-04
Yes! I am Interested

DN25 YF-G1 Large Flow Water Sensor

DN25 YF-G1 Large Flow Water Sensor
  • DN25 YF-G1 Large Flow Water Sensor
Get Best Quote
Approx. Price: Rs 799 / PieceGet Latest Price

Product Details:

Mini Working VoltageDC 4.5V
Working VoltageDC 5V-18V
Flow Rate Range2-100L/min
Water Pressure Resistance2MPa
Operating Temperature20-85C

Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in water dispenser or coffee machine.

Features :

  • Compact, Easy to Install
  • High Sealing Performance
  • High Quality Hall Effect Sensor
  • RoHS Compliant

Specifications :

  • Insulation resistance: = >100MΩ
  • Characteristics of Flow pulse: f=(4.8*Q) Q=L/Min
  • Accuracy: ±3%
  • Connector type: G1
Request
Callback


Additional Information:

  • Item Code: DN25-YF-G1
Yes! I am Interested

YF-S401 Water Flow Meter Hall Sensor

YF-S401 Water Flow Meter Hall Sensor
  • YF-S401 Water Flow Meter Hall Sensor
Get Best Quote
Approx. Price: Rs 375 / PieceGet Latest Price

Product Details:

Working VoltageDC 5 -24 V
Maximum Working Current15mA - 5 V DC
Flow Rate Range0.3-6L/min
Connection6mm (external diameter)
Inlet Water Pipe Diameter2.5-4mm

Water flow sensor consists of a plastic valve body, a water rotor, and a hall effect sensor - when water flows through, the internal rotator will change its speed with different rate of flow and hall effect sensor outputs the corresponding pulse signal. Use with laser cutters or CNC to measure if and how much water is flowing through laser tube or CNC spindle for cooling.

Specifications

  • Load Capacity: ≤10mA (DC 5V)
  • Operating Temperature: ≤80¿¿¿
  • Liquid Temperature: ≤120¿¿¿
  • Operating Humidity: 35%???90%RH
  • Water Pressure: ≤2.0MPa
  • Storage Temperature: -25???+ 80¿¿¿
  • Storage Humidity: 25%???95%RH

Connections

  • Red: Power In
  • Black: Ground
  • Yellow: Signal Output
Request
Callback


Additional Information:

  • Item Code: YF-S401
Yes! I am Interested

HC-SR 501 Pyroelectric Infra Red Motion Detection Module

HC-SR 501 Pyroelectric Infra Red Motion Detection Module
  • HC-SR 501 Pyroelectric Infra Red Motion Detection Module
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Working Voltage RangeDC 4.5V- 20V
Current Drain60uA
Detection Range140 deg
Blockade Time2.5s (Default)
Work temperature20-80 deg C

Product Details

Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.

The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a domb shaped Fresnel lens.

  • 100% Brand New and High Quality
  • Color: White + Green
  • Infrared Sensor with Control Circuit Board
  • The Sensitivity and Holding Time Can be Adjusted

  • Voltage Output: High/Low level Signal: 3.3V TTL output
  • Detection Distance: 3 to 7m (can be adjusted)
  • Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
  • Trigger: L: Non-repeatable trigger H: Repeat Trigger (Default)
  • Trigger Method: L Unrepeatable Trigger / H Repeatable Trigger
  • Material: Mixed Material
  • Dimension: 3.2cm x 2.4cm x 1.8cm (Approx)
  • Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
  • Time Setting: Turn to Right, Time Increases (About 300S); Turn to Left, Time Reduce (About 5S).
Request
Callback
Yes! I am Interested

Turbidity Sensor

Turbidity Sensor
  • Turbidity Sensor
Get Best Quote
Approx. Price: Rs 999 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Part NumberTSD-10
Rated VoltageDC 5V (between No #1 & Ground)
Voltage Differential3.0V - 10%
Test MethodAfter testing voltage in water (0 NTU)
Voltage test in water 4000 NTUTurbidity level Calibration - Master NTU standard liquid

Turbidity Sensors measure the amount of suspended particles, or turbidity, in the wash water of washing machines and dishwashers. The 165D6042P003 measures temperature as well as turbidity. By detecting the amount of soil in the water, appliances can conserve energy by only washing as long as necessary.


(Voltage between No #2 pin & Ground)
Operating Temperature Range
-10°C ~ 90°C
Storage Temperature Range
-20°C~ 90°C
Rated Current
Max. 30 mA
Insulation Resistance
Min 100 MO by 500V DC

Request
Callback


Additional Information:

  • Item Code: TURBS10
Yes! I am Interested

PH Tester Soil Water Moisture Light Test Meter Sensor

PH Tester Soil Water Moisture Light Test Meter Sensor
  • PH Tester Soil Water Moisture Light Test Meter Sensor
Get Best Quote
Approx. Price: Rs 550 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Working Temperature5-50
Product size approx285*50*30mm/11.22*1.96*1.18'
Needle length approx210mm/8.26'
Package size approx330*100*36mm/12.99*3.93*1.41'
Weight approx57g

Features 3 functions in one compact meter-measure the moisture and pH content of the soil and the environmental light. Scientifically accurate. No need for batteries. Easy-to-read scale indicator. Incredibly simple to use - just stick it in the soil! Works with house and garden plants.
Detector shape Needle( 1pc Copper needle, 1pc Silver needle)

Request
Callback


Additional Information:

  • Item Code: PHSOIL
Yes! I am Interested

IR Module 8 Sensor Array

IR Module 8 Sensor Array
  • IR Module 8 Sensor Array
Get Best Quote
Approx. Price: Rs 300 / PieceGet Latest Price

Product Details:

Frequency50 to 60 Hz
Voltage110 to 220 V
recommended0.25" (6 mm)
Current Rating100-200 mA

This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a linefollowing robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.

Features:

  • Maximum recommended sensing distance: 0.25" (6 mm)
  • The module is a convenient carrier for eight IR emitter and receiver pairs evenly spaced at intervals of 0.375" (9.525 mm).
Request
Callback
Yes! I am Interested

IR LED ( Tx ) & IR Sensitive Photo Diode ( Rx ) - 5mm

IR LED ( Tx ) & IR Sensitive Photo Diode ( Rx ) - 5mm
  • IR LED ( Tx ) & IR Sensitive Photo Diode ( Rx ) - 5mm
Get Best Quote
Approx. Price: Rs 18 / PieceGet Latest Price

Product Details:

Diameter Size5mm
IR LED Current Rating30mA nominal, 600mA pulse loading at 1% duty cycle
IR LED Wavelength940nM
Photodiode Peak Response Wavelength940nM

The IR Transmitter and Receiver pair matched pair used in our IR proximity, White Line or Micromouse sensor. It consists of 5mm 940 nanometer wave length high power IR LED and photodiode having peak sensitivity at 940 nanometer wavelength.



Request
Callback
Yes! I am Interested

Rotational Speed Measuring Sensor

Rotational Speed Measuring Sensor
  • Rotational Speed Measuring Sensor
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Power supply3.3 5 V
Working Voltage3.3V to 5V.
Small Board PCB Size3.2 cm x 1.4 cm
TypeRotational Speed

Application:

Widely used in motor speed detection, pulse count, the position limit, etc.

Feature:

  • Using imported groove optical coupling sensor, width 5mm.
  • It have the output state light, if output high level, the lights are off. if output low level ,it on.
  • If it covered,it will output high level;otherwise it output low level.
  • Good signal and waveform, with strong driving ability for more than 15mA.
  • Output: digital switch output (0 and 1).
  • Equipped with a fixed bolt hole, easily install.
  • Use the LM393 wide voltage comparer.

Specification:

The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect.
DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.

Wiring specification:
  • GND Connect power negative
  • DO TTL switch signal output
  • AO This module does not work
Request
Callback
Yes! I am Interested

Soil Moisture Sensor

Soil Moisture Sensor
  • Soil Moisture Sensor
Get Best Quote
Approx. Price: Rs 120 / PieceGet Latest Price

Product Details:

TypeSoil Moisture
Operating Voltage3.3-5 V
Use ChipLM393
PCB Size3.2-14cm


Instructions for Use:

  • Soil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil
  • Module to reach the threshold value is set in the soil moisture, DO port output high, when the soil humidity exceeds a set threshold value, the module D0 output low
  • The digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture
  • The digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment
  • Analog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture
Request
Callback
Yes! I am Interested

IR Infrared Obstacle

IR Infrared Obstacle
  • IR Infrared Obstacle
Get Best Quote
Approx. Price: Rs 65 / PieceGet Latest Price

Product Details:

Voltage12 V
Power W60W
Input Vpltage5V or 3.3V
Weight150 g

Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor 10-12cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output
Request
Callback
Yes! I am Interested

Water Float Sensor ( Black - Framed )

Water Float Sensor ( Black - Framed )
  • Water Float Sensor ( Black - Framed )
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Voltage110 to 220 V
Frequency50 to 60 Hz
Current Rating200 mA
Packaging TypeBox

A float sensor is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices. Magnetic float sensor is an electromagnetic ON/OFF switch. It helps to sense the level of water present in the overhead tank or sump. These sensors has a permanent magnet in the float. The Switch is present in the white stem of the sensor. As the float rises or falls with level of water in the tank, the switch gets activated by the magnet in the float, thereby the signal which is obtained from the sensors is used along with the water level controllers for controlling the motor pump.

Features:

  • No electrical contact with water.
  • Shock proof
  • Corrosion free and rust free
  • Sensor with 1.5 meter cable
Request
Callback
Yes! I am Interested

Photoelectric Switch

Photoelectric Switch
  • Photoelectric Switch
Get Best Quote
Approx. Price: Rs 30 / PieceGet Latest Price

Product Details:

TypePhotoelectric Switch
Model NoHY860D
FeaturesFast Switching Speed
Voltage7-12 V

Description:

Photoelectric Switch HY860D has a built-in bracket for easy mounting. It consists of an infrared emitter and a phototransistor. It is located face-to-face on the optical axes in a leaded package.

Working:

Output phototransistor switches from ON state to OFF state when object is inserted into gap between emitter and sensor.

Applications:

HY860D is used for object detection and automatic counting, such as printer, scanner, copy machine, facsimile machine and vending machine, etc.

Features:

  • Non-Contact Switchinhg
  • For Direct PC-Board or Dual-In-Line Socket Mounting
  • Fast Switching Speed
Request
Callback


Additional Information:

  • Item Code: HY860D
Yes! I am Interested

E18-D80NK-N IR Sensor

E18-D80NK-N IR Sensor
  • E18-D80NK-N IR Sensor
Get Best Quote
Approx. Price: Rs 355 / PieceGet Latest Price

Product Details:

Frequency50 Hz
Voltage220 V
Current Rating100 mA
Packaging TypeBox

Transmitter and receiver in one photoelectric sensor. The sensor has an adjustable detection distance and visible light interference. It is easy to use and is ideal for panel mounting.

Effective distance: Adjustable from 3-80CM

Request
Callback
Yes! I am Interested

DHT11 Temperature & Humidity Sensor Module

DHT11 Temperature & Humidity Sensor Module
  • DHT11 Temperature & Humidity Sensor Module
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Voltage110 to 220 V
Packing TypeBox
Frequency50 to 60 Hz
Current Rating100-200 mA

This DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability. This sensor includes a resistive-type humidity measurement component and an NTC temperature measurement component, and connects to a high-performance 8-bit microcontroller, offering excellent quality, fast response, anti-interference ability and cost-effectiveness.
Request
Callback
Yes! I am Interested

Accelerometer ADXL335

Accelerometer ADXL335
  • Accelerometer ADXL335
Get Best Quote
Approx. Price: Rs 350 / PieceGet Latest Price

Product Details:

Frequency50 to 60 Hz
PhaseSingle Phase
Voltage110 to 220 V
Current Rating100-200 mA

The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with an on-board voltage regulator and works at both 3.3V & 5V (3-5V)
Request
Callback
Yes! I am Interested

Dht22 Digital- Output Relative Humidity & Temperature Sensor

Dht22 Digital- Output Relative Humidity & Temperature Sensor
  • Dht22 Digital- Output Relative Humidity & Temperature Sensor
Get Best Quote
Approx. Price: Rs 270 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Packing TypeBox
Frequency50 Hz
Transmission Distance20m
Product TypeTemperature Sensor

DHT22 output calibrated digital signal. It utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability.Its sensing elements is connected with 8-bit single-chip computer.Every sensor of this model is temperature compensated and calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of programme in OTP memory, when the sensor is detecting, it will cite coefficient from memory.Small size & low consumption & long transmission distance(20m) enable DHT22 to be suited in all kinds of harsh application occasions.
Request
Callback
Yes! I am Interested

Portable Electronic Weight Sensor Load Cell 1 KG Driver

Portable Electronic Weight Sensor Load Cell 1 KG Driver
  • Portable Electronic Weight Sensor Load Cell 1 KG Driver
Get Best Quote
Approx. Price: Rs 235 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Rated Output1.0mV/V 0.15mV/V
Creep0.03%F.S./30min
Rated Load10Kg
Zero Output0.1mV/V

The 1Kg 2.2 lbs load cell is great for used in hopper scales, platform scales, platform balance, belt scales and other electronic weighing devices.

Product Name :
Working Temperature : -10°C~+50°C
Compensated Temperature Range : -10°C~+40°C Safety Overload : 150%
Recommend Excitation Voltage : 10V DC Max Excitation Voltage M : 15V DC
Total Size : 80 x 13 x 12mm / 3.1" x 0.5" x 0.47"(L*W*T)
Thead Hole Diameter : 3.5mm / 0.138"4.3mm / 0.169"
Cable Length : 230mm/ 9'Material Aluminium : Alloy Color : Silver Tone Weight : 29g
Package Content : 1 x Load Cell
Request
Callback


Additional Information:

  • Item Code: LDCL001KG
Yes! I am Interested

Portable Electronic Weight Sensor Load Cell 10 KG Driver

Portable Electronic Weight Sensor Load Cell 10 KG Driver
  • Portable Electronic Weight Sensor Load Cell 10 KG Driver
Get Best Quote
Approx. Price: Rs 325 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Rated Output1.0mV/V 0.15mV/V
Creep0.03%F.S./30min
Rated Load10Kg
Zero Output0.1mV/V

Digital Portable 10KG Electronic Scale Load Cell Weight Weighing Sensor Module

Specification:

Input End: Red+(power), Black-(power)
Output End: Green+(signal), White-(signal)
Recommended operating voltage: 3 ~ 12 VDC
Maximum operating voltage: 15 VDC
Input Impedance: 1115 10%
Output Impedance: 1000 10%
Connection: red wire to +E,black wire to -E,Green wire to +S, White wire to -S

Request
Callback


Additional Information:

  • Item Code: LDCL010KG
Yes! I am Interested

ECG AD8232 Sensor Module Kit

ECG AD8232 Sensor Module Kit
  • ECG AD8232 Sensor Module Kit
Get Best Quote
Approx. Price: Rs 1,999 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
VoltageDC3.3 V Power Supply
Frequency50 to 60 Hz
Working Voltage220 V
Packaing SizeBox

8232 AD8232 Ecg physiological measurement Ecg Physiological Measurement Heart Pulse Ecg Monitor Sensor Module

Technical parameters:
Analog outputLow power consumption control
The LED indicator3.5 mm electrode interface

Application:- Fitness and sports heart rate monitoring- Portable ECG- Remote health monitor- Game peripheral equipment- Bioelectricity signal collection

Specification:- AD8232 adopts double poles high-pass filter to eliminate the motion artifacts and electrode half cell potential- AD8232 adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises-

Request
Callback


Additional Information:

  • Item Code: AD8232
Yes! I am Interested

GY273 HMC5883L Triple Axis Compass Magnetometer Module

GY273 HMC5883L Triple Axis Compass Magnetometer Module
  • GY273 HMC5883L Triple Axis Compass Magnetometer Module
Get Best Quote
Approx. Price: Rs 399 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Frequency50 to 60 Hz
Voltage110 to 220 V
Current Rating200 mA
Packaging TypeBox

Description:
HMC5883L is a surface-mount, multi-chip module designed for low-field magnetic sensing with a digital interface for applications such as low-cost compassing and magnetometry. The HMC5883L includes our state-of-the-art, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables 1° to 2° compass heading accuracy. The I2C serial bus allows for easy interface. The HMC5883L is a 3.0x3.0x0.9mm surface mount 16-pin leadless chip carrier (LCC). Applications for the HMC5883L include Mobile Phones, Netbooks, Consumer Electronics, Auto Navigation Systems, and Personal Navigation Devices.

Request
Callback


Additional Information:

  • Item Code: GY273
Yes! I am Interested

Heartbeat Sensor Detector Module Finger for Arduino

Heartbeat Sensor Detector Module Finger for Arduino
  • Heartbeat Sensor Detector Module Finger for Arduino
Get Best Quote
Approx. Price: Rs 175 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Frequency50 to 60 Hz
Voltage110 to 220 V
Current Rating100-200 mA
Packaging TypeBox

HEARTBEAT SENSOR MODULE - KEYES BLACK
Features
- 16 x 116 x 3mm (l x w x h)- KY-039 Keyes Module- IR Emitter and Receiver- 3 - 5V DC Input- M2 Mounting holes (centres 10mm apart)
Designed to be compatible with standard 2.54mm sockets

Description
This component is ideally suited to adding heartbeat sensing to your project. This detection module combines a phototransistor and IR LED, which when a finger is placed between will provide a varying signal. Reading this analog signal you can interpret a change in signal as a heartbeat.
As a simple module it will suit use within a large range of projects based on microcontrollers such as Arduino boards and the Raspberry Pi. The module has a M2 mounting hole allowing for its easy attachment to a multitude of surfaces.

Request
Callback


Additional Information:

  • Item Code: HRTBTSEN
Yes! I am Interested

Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm

Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm
  • Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm
Get Best Quote
Approx. Price: Rs 650 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Distance measuring range4 to 30 cm4
Package size29.5 - 13.0 - 13.5mm5
Short measuring cycle(16.5ms)3
Distance Sensor4-30cm

DescriptionGP2Y0A41SK0F is a distance measuring sensor unit,composed of an integrated combination of PSD(position sensitive detector) , IR-LED (infrared emitting diode) and signal processing circuit.The variety of the reflective of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method.This device outputs the voltage corresponding to the detection distance. So this sensor can also be used as a proximity sensor.
Features1. Distance measuring sensor is united with PSD, infrared LED and signal processing circuit2.  Analog output type
Applications1. Cleaning robot 2. Personal robot 3. Sanitary
¿¿¿ Compliant with RoHS directive (2002/95/EC)
Request
Callback


Additional Information:

  • Item Code: SHRP0430
Yes! I am Interested

SparkFun Piezo Vibration Sensor

SparkFun Piezo Vibration Sensor
  • SparkFun Piezo Vibration Sensor
Get Best Quote
Approx. Price: Rs 465 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
TypePiezo Vibration
Large VoltageUp to +/-90V
Voltage Output0.1
Used Forflex, touch, vibration and shock measurements

Description: This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.
Comes with solderable crimp pins and a mass attached to the tip. This mass increases the sensitivity to motion.
Features:
Flexible PVDF Piezo Polymer FilmWide dynamic rangeLaminated for higher voltage output0.1" breadboard friendly leads
Request
Callback


Additional Information:

  • Item Code: PZVBRSM
Yes! I am Interested

Rotary Encoder Module

Rotary Encoder Module
  • Rotary Encoder Module
Get Best Quote
Approx. Price: Rs 105 / UnitGet Latest Price

Product Details:

Rotation limit360 degree

Description

The KY-040 Rotary Encoder Module, is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor / controllers into information such as speed, distance, and position.

Technical Parameters

  • Parameter Value
  • Cycles per revolution (CPR) 20
  • Working voltage 0 - 5V
  • Size 32 × 19 × 30mm
  • Weight 10g
  • Documents
  • Schematic
  • Arduino Sample Code
  • bildr Tutorial
  • KY-040 Connections to Arduino
Request
Callback


Additional Information:

  • Item Code: RTRYNCDR
Yes! I am Interested

Water Flow Sensor

Water Flow Sensor
  • Water Flow Sensor
Get Best Quote
Approx. Price: Rs 260 / PieceGet Latest Price
Water Flow Sensor And Fluid Flow Meter Control Switch YFS201

Water flow sensor can be used to measure the flow of liquids, i.e. the consumption of liquids in industrial or domestic usage. For example you can make a robotic cocktail dispensing machine, and can use this sensors to accurately measure components like Soda, Water, etc. Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal.

I believe using this should be simple, you just need to connect to Arduino interrupt pin 2, and can measure the number of PWM pulse/interrupt per unit of time. The water flow would be directly proportional to the number of measured pulses.

Connection details:

  • Red wire is +5V
  • Black wire is GND
  • White wire is PWM signal output
Request
Callback


Additional Information:

  • Item Code: YF-S201
Yes! I am Interested

Vibration Switch Sensor Module

Vibration Switch Sensor Module
  • Vibration Switch Sensor Module
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

TypeVibration Switch
Support Input Voltage5V/3.3V
PCB Size30(mm) x15(mm)

This module features an adjustable potentiometer, a vibration sensor, and a LM393 comparator chip to give an adjustable digital output based on the amount of vibration. The potentiometer can be adjusted to both increase and decrease the sensitivity to the desired amount. The module outputs a logic level high (VCC) when it is triggered and a low (GND) when it isn’t. Additionally there is an onboard LED that turns on when the module is triggered.

  • On-board LM393 voltage Comparator chip and Vibration sensing probe
  • On-board the output signal indication,output effective signal is high level, and the same time the indicator light up, output signal can directly connect with microcontroller IO.
  • Signal detection sensitivity can be adjusted.
  • Reserved a line voltage compare circuit. (P3 is leaded out).
Request
Callback
Yes! I am Interested

Low Level Trigger Active Buzzer Alarm Module DC 3.3-5V

Low Level Trigger Active Buzzer Alarm Module DC 3.3-5V
  • Low Level Trigger Active Buzzer Alarm Module DC 3.3-5V
Get Best Quote
Approx. Price: Rs 95 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Coil VoltageDC 3.3-5V
Working TypeLow Level Trigger
Total Size32 x 13 x 12mm/ 1.2" x 0.5" x 0.47" L W H
MaterialPlastic, Electronic Part
Net Weight9g



Request
Callback


Additional Information:

  • Item Code: LWLVLALRM
Yes! I am Interested

GY-906 MLX90614ESF Contactless Temperature Sensor Module

GY-906 MLX90614ESF Contactless Temperature Sensor Module
  • GY-906 MLX90614ESF Contactless Temperature Sensor Module
Get Best Quote
Approx. Price: Rs 799 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model NameMLX90614ESF

Up for sale is a MELEXIS MLX90614ESF-BAA-000-TU-ND non-contact infrared thermometer for use with Arduino,or any microcontroller that can communicate with it through it's I2C interface.This sensor comes with a breakout board with all of the components needed for operation and two types of pins.
Features and Benefits: Small size, low cost Mounted on a breakout board with two types of pins 10k Pull up resistors for the I2C interface with optional solder jumpers Easy to integrate Factory calibrated in wide temperature range: -40...+125°C for sensor temperature and -70...+380°C for object temperature. High accuracy of 0.5°C over wide temperaturerange(0...+50°C for both Ta and To) High (medical) accuracy calibration Measurement resolution of 0.02°C Single and dual zone versions SMBus compatible digital interface Customizable PWM output for continuousreading Simple adaptation for 8...16V applications Sleep mode for reduced power consumption Different package options for applications andmeasurements versatility Automotive grade

Applications Examples: High precision non-contact temperaturemeasurements Thermal Comfort sensor for Mobile AirConditioning control system Temperature sensing element for residential,commercial and industrial building airconditioning Windshield defoggingAutomotive blind angle detectionIndustrial temperature control of moving partsTemperature control in printers and copiersHome appliances with temperature controlHealthcareLivestock monitoringMovement detectionMultiple zone temperature control - up to 127sensors can be read via common 2 wiresThermal relay / alertBody temperature measurement Data check Package Included:1 x MLX90614ESF-BAA-000-TU-ND Infrared Thermometer Module IR Sensor for Arduino
Request
Callback


Additional Information:

  • Item Code: MLX90614MOD
Yes! I am Interested

LM386 Audio Amplifier Module

LM386 Audio Amplifier Module
  • LM386 Audio Amplifier Module
Get Best Quote
Approx. Price: Rs 99 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model NumberLM386 IC Based

Features:
1. On-board LM386 Chip
2. 200 multiplier benefits circuit design
3. On-board speaker wiring block
4. On-board 10K variable resistor, you can adjust the volume of the enlarged
5. On-board power indicator
6. The chip pin leads, can be directly input audio signal
7. Operating voltage: 5 - 12V
8. Board size: 41 x13mm
Request
Callback


Additional Information:

  • Item Code: AMPLM386
Yes! I am Interested

Voltage Detection Sensor Module

Voltage Detection Sensor Module
  • Voltage Detection Sensor Module
Get Best Quote
Approx. Price: Rs 125 / PieceGet Latest Price
This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times
You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side
If 3.3V is used, the input voltage must not exceed 16.5V
Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0
00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445
Input voltage range DC0-25V
Voltage detection range DC0.02445 V - 25V
Voltage analog resolutions 0.00489V
DC Input positive terminal connected to VCC, GND negative pole
Output interface "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin
Request
Callback


Additional Information:

  • Item Code: VOLTSENS
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

LJ12A3-4-Z/BY PNP Inductive Proximity Sensor

LJ12A3-4-Z/BY PNP Inductive Proximity Sensor
  • LJ12A3-4-Z/BY PNP Inductive Proximity Sensor
Get Best Quote
Approx. Price: Rs 245 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Voltage110 to 220 V
Frequency50 to 60 Hz
Current Rating100-200 mA

Description :
LJ12A3-4-Z/BY PNP DC6-36V Inductive Proximity Sensor Detection Switch
Features :
Proximity switches, also known as non-contact proximity switch, is the ideal electronic switch sensor.When the metal detecting near-proximity switch sensing area.Switches can be non-contact, no pressure, no spark, quickly issued electrical command.Accurately reflect the position and stroke movement mechanism.Positioning accuracy, operating frequency, service life.Easy to install and suitable for harsh environments the ability to adjust.General mechanical limit switch can not be compared.

Request
Callback


Additional Information:

  • Item Code: LJ12A34ZBYP
Yes! I am Interested

Pulse Sensor

Pulse Sensor
  • Pulse Sensor
Get Best Quote
Approx. Price: Rs 435 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Diameter0.625" (-16mm)
Overall Thickness0.125" (-3mm)
Cable Length24" (-609mm)
Voltage3V to 5V
Current consumption4mA at 5V

Pulse Sensor is an open source hardware project.
Request
Callback
Yes! I am Interested

Force Sensor Resistor 0.5 14.7mm

Force Sensor Resistor 0.5 14.7mm
  • Force Sensor Resistor 0.5 14.7mm
Get Best Quote
Approx. Price: Rs 580 / PieceGet Latest Price

Product Details:

Frequency50 to 60 Hz
Voltage110 to 220 V
TypeForce Sensor Resistor
Packaging TypeBox

Request
Callback
Yes! I am Interested

4 x 4 Matrix Membrane Switch & Keypad

4 x 4 Matrix Membrane Switch & Keypad
  • 4 x 4 Matrix Membrane Switch & Keypad
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Thikness1-2 mm
TypeMatrix Membrane Switch
Size4 x 4 mm
Dishplay TypeTouch

4 x 3 membrane keypad, with FPC and back side sticker.
Request
Callback
Yes! I am Interested

Line Sensor Array

Line Sensor Array
  • Line Sensor Array
Get Best Quote
Approx. Price: Rs 300 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Frequency50 Hz
Voltage110 V
TypeLine Sensor Array
Current Rating300 V

Request
Callback
Yes! I am Interested

DS18B20 3Pins Temperature Measurement Module

DS18B20 3Pins Temperature Measurement Module
  • DS18B20 3Pins Temperature Measurement Module
Approx. Rs 199 / Piece
Get Best Quote
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip
X

Explore more products



Reach Us
Sahib Chandock (Sales Head)
13- B Shamrao Vithal Marg Off Lamington Road
Grant Road, Mumbai- 400007, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS