Modules - Miscellaneous

Product Details:

Platform: Arduino, MCU, ARM, raspberry pie
Using original IRF520 Power MOS, you can adjust the output PWM
Arduino drive up to 24V allows the load, such as LED lights, DC motors, miniature pumps, solenoid valves
PWM dimming LED can be used to achieve stepless dimming, variable speed motor

Additional Information:

• Item Code: IRF520MSFT

Product Details:

A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.

• Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
• These devices must be used in conjunction with a heat sink to avoid burned
• One side is cooling (Printed model number)and another side is heating (Printed no word) when working.
• Please radiating the heating side, avoid using under no-radiating condition over 2s\Coated with thermal grease when install the device
• Cable length: 30cm
• Dimensions: 1.57 in x 1.57 in x 0.12 in (4.0 cm x 4.0 cm x 0.3 cm)

Notes:

• Power ON the device only with proper Heat-sink setup to avoid any burning/damage or malfunction of the device!
• Use a good quality heat sink (such as in CPU fans) with thermal paste and power the device.
• Use a 12V Dc Power supply to power the TEC1-12706.
• Use ONE AA battery for 10- 20 seconds to power ON the device to find the hot /cold side.
• Warning!
• Power ON the device only with proper Heat-sink setup to avoid burning/damage/malfunction of device!

1. The hot surface Th of the TEC must be attached to a suitable FAN SINK (60x60x40+mm) that is capable of carrying away both the heat pumped by the TEC plus Joule heat from the electric power supplied to the TEC. A heat sink rise of 15C above ambient is typical for many TEC applications. Otherwise, a bigger heat sink must be used to reduce temperature.
2. Care should be taken when applying pressure during installation. Uniform pressure is desired across the mounting surfaces. If uneven pressure is applied, thermal performance may be reduced or damage may occur to the TEC.
3. Clean surface thoroughly, making sure there are no chips, dirt or any foreign substances that may affect bonding. Coat the contacting sides, Th and Tc, with thermally conductive grease or glue.

Product Details:

The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.

The circuit also includes a 10A fuse, with reverse connection of power supply and control voltage over-voltage protection function.

Features

• 100% brand new .
• The overload and short circuit protecting current is 10A
• The 10A fuse with reverse connection of power supply and control voltage over-voltage protection function
• Can adjust the speed by the external 0-5V signal

NOTE This can NOT be used to the BRUSHLESS motor.

The controller is NOT reverse-polarity protected and will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and For always turn off the power supply before making any wiring changes.

Item size 60*56*27mm
Net weight 78g

Package Included

1x 12-40v 10A DC Motor Speed Controller

Product Details:

This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-- Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.

The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC lo

Operating instruction:

• Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram.
• Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits.
• You can now control the speed of the motor through potentiometer.

Package included:

• 1 x DC 6V - 28V 3A PWM Motor Speed Variable Regulator Controller Switch

Product Details:

Available in -

2v 150mA

3v 150mA

6v 100mA

12v 250mA

Product Details:

Note: The color of the item may vary slightly due to photography and your own computer Slim design, security and stability, low power consumption Applied to the cabinet lock, locker locks, file cabinet locks, luggage locks, electric locks, door locks, solenoid locks, drawer, newspaper boxes lock, sauna lock, locker electromagnetic locks, electric locks, newspaper boxes, sauna Electronics lock Designed with the open frame type and mount board, high power.Easy to install for the electric door lock or other automatic door lock systems with the mounting board.

Specifications:
Package included:1 x Electric Lock Assembly Solenoid

Additional Information:

• Item Code: SLNDLTCH12

Product Details:

In order to meet excellent quality standards, we are supplying Battery Charger Module.

Product Details:

1. For MB102 bread board
2. compatible with 5V, 3.3V
3. On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads
4. Two way independent control