Bombay Electronics
Bombay Electronics
Grant Road, Mumbai, Maharashtra
GST No. 27AABPC5348L1ZO
TrustSEAL Verified
Call 08048076458 50% Response Rate
SEND EMAIL

Sensors - Ultrasonic, Light, Sound and Proximity

Collection of Ultrasonic and Proximity Sensors

LJ12A3-4-Z/BY PNP Inductive Proximity Sensor

LJ12A3-4-Z/BY PNP Inductive Proximity Sensor
  • LJ12A3-4-Z/BY PNP Inductive Proximity Sensor
Get Best Quote
Approx. Price: Rs 199 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandRobodo
Sensor TypeMetal Object
TypePNP Normally Open Three-line.
Sensing Distance1-4 mm
MaterialMetal
Voltage6 - 36V
Current Rating300mA

Description :
LJ12A3-4-Z/BY PNP DC6-36V Inductive Proximity Sensor Detection Switch
Features :
Proximity switches, also known as non-contact proximity switch, is the ideal electronic switch sensor.When the metal detecting near-proximity switch sensing area.Switches can be non-contact, no pressure, no spark, quickly issued electrical command.Accurately reflect the position and stroke movement mechanism.Positioning accuracy, operating frequency, service life.Easy to install and suitable for harsh environments the ability to adjust.General mechanical limit switch can not be compared.
Request
Callback


Additional Information:

  • Item Code: LJ12A34ZBYP
Yes! I am Interested

E18-D80NK Infrared Obstacle Avoidance Sensor

E18-D80NK Infrared Obstacle Avoidance Sensor
  • E18-D80NK Infrared Obstacle Avoidance Sensor
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

Voltage5 VDC
Current Rating25 mA
Response Time<2ms
maximum load current100mA
Diameter17MM
detection of objectstransparent or opaque

Transmitter and receiver in one photoelectric sensor. The sensor has an adjustable detection distance and visible light interference. It is easy to use and is ideal for panel mounting.

Effective distance: Adjustable from 3-80CM

Request
Callback
Yes! I am Interested

HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module

HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
  • HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Model/TypeHC-SR505
Current Rating In Amps0.06 mA
VoltageDC4.5-20V
Distance Measuring Range3 meters
Dimensions (mm) LxWxH10 x 23 x 5
Weight (gm)10
Delay timeDefault 8S + -30% (can be customized)
Induction angle<100-degree cone angle

HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module is based on infrared technology, It automatically controls the products with high sensitivity, high reliability, ultra-small size, and ultra-low-voltage operation mode.

It is widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.

Applications:
  1. Body induction lamps.
  2. Body sensors toys.
  3. Security Products.
  4. Industrial automation and control.
  5. Auto-sensing of electrical equipment.
  6. Battery-powered automatic control.
Features :
  1. Low-power consumption
  2. Output level: High 3.3V / Low 0V
  3. Trigger: repeatable trigger (default)
  4. Automatic induction: to enter the sensing range of the output is high, people leave the sensor range automatically delay off high, output low. Ultra-small size.
  5. Repeatable trigger: the sensor output high, the delay period, if there is human activity in its sensing range, the output will remain high until people leave after the high variable delay Low (automatically extended sensor module detects the human body after every activity a delay period, and the last time an event is the starting point of the delay time).
  6. Wide operating voltage range: the default operating voltage DC4.5V-20V.
  7. Micropower: quiescent current <50 microamps, especially for battery-powered automatic control products.
  8. Output high signal: easy docking and all kinds of circuits.
Request
Callback
Yes! I am Interested

HC-SR501 Pyroelectric InfraRed ( PIR ) Motion Sensor

HC-SR501 Pyroelectric InfraRed ( PIR ) Motion Sensor
  • HC-SR501 Pyroelectric InfraRed ( PIR ) Motion Sensor
Get Best Quote
Approx. Price: Rs 70 / PieceGet Latest Price

Product Details:

Usage/ApplicationMotion Sensor
BrandRobodo
Working Voltage RangeDC 4.5V- 20V
Current Drain60uA
Detection Range140 deg

Working Voltage Range: DC 4.5V- 20VCurrent Drain: <60uADetection Range: <140°Voltage Output: High/Low level Signal: 3.3V TTL outputDetection Distance: 3 to 7m (can be adjusted)Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)Blockade time: 2.5s (Default)Trigger: L: Non-repeatable trigger H: Repeat Trigger (Default)Work temperature: -20-+80°CTrigger Method: L Unrepeatable Trigger / H Repeatable TriggerMaterial: Mixed MaterialDimension: 3.2cm x 2.4cm x 1.8cm (Approx)Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)Time Setting: Turn to Right, Time Increases (About 300S); Turn to Left, Time Reduce (About 5S).
Request
Callback
Yes! I am Interested

TCRT5000 Sensor

TCRT5000 Sensor
  • TCRT5000 Sensor
Get Best Quote
Approx. Price: Rs 25 / PieceGet Latest Price

Product Details:

Package TypeLeaded
Detector TypePhoto transistor
Dimensions L W H10.2 x 5.8 x 7
Peak Operating Distance2.5 mm
Operating Range Within20 % relative collector current 0.2 mm to 15 mm

DESCRIPTION

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version

Features

Typical output current under test: IC = 1 mA
Daylight blocking filter
Emitter wavelength: 950 nm
Lead (Pb)-free soldering released
Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC

Applications

Position sensor for shaft encoder
Detection of reflective material such as paper, IBM cards, magnetic tapes etc.
Limit switch for mechanical motions in VCR
General purpose - wherever the space is limited DESCRIPTION
Request
Callback
Yes! I am Interested

IR Infrared Obstacle

IR Infrared Obstacle
  • IR Infrared Obstacle
Get Best Quote
Approx. Price: Rs 40 / PieceGet Latest Price

Product Details:

Sensor TypeDistance Sensor
Voltage3.3 to 5V
Weight5 g
Detection angle35 deg
Comparator ChipLM393

Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor 10-12cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output
Request
Callback
Yes! I am Interested

CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino

CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino
  • CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino
Get Best Quote
Approx. Price: Rs 160 / PieceGet Latest Price

Product Details:

BrandRobodo
Sensor TypeDigital Proximity And Ambient Light Sensor
Working voltage2.8-3.8V
DetectionALS,IR LED and Proximity Detector in an Optical Module

QUICK OVERVIEW
  1. Working voltage:2.8-3.8V
  2. ALS, IR LED and Proximity Detector in an Optical Module;
  3. Ambient Light Sensing (ALS);
  4. Approximates Human Eye Response;
  5. Programmable Interrupt Function with Upper and Lower Threshold;
  6. Up to 16-Bit Resolution;
  7. High Sensitivity Operates Behind Darkened Glass;
  8. Low Lux Performance at 0.01 lux;

This is CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly.

The proximity detection feature operates well from bright sunlight to dark rooms. The wide dynamic range also allows for operation in short distance detection behind dark glass such as a cell phone.

In addition, an internal state machine provides the ability to put the device into a low power mode in between ALS and proximity measurements providing very low average power consumption. The ALS provides a photopic response to light intensity in very low light condition or behind a dark faceplate.

Applications

 

Adjustable light mobile phone backlight
Notebook / display security
automatically enabled hands-free mode
Automatic menu pop up
Digital camera eye sensor.

Features :

  1. Optical modules integrated with ALS, infrared LEDs and proximity detectors
  2. Ambient Light Sensing (ALS)
    – Approximate human visual response
    – Programmable interrupt capability with upper and lower thresholds
    – Up to 16-bit resolution
    – High sensitivity operation behind dark glass
    – 0.01lux low lumen performance
  3. Proximity detection
    – Fully calibrated to 100 mm detection
    – Integrated infrared LED and synchronous LED driver
    – Eliminates factory calibration of the proximity sensor
  4. Programmable wait timer
    – Wait for state power consumption – 90μA typical
    – Programmable range from 2.7 ms to more than 8 seconds
  5. I2C interface compatible
    – Up to 400kHz (I2C fast mode)
    – Dedicated interrupt pin.
Request
Callback
Yes! I am Interested

IR Module 8 Sensor Array

IR Module 8 Sensor Array
  • IR Module 8 Sensor Array
Get Best Quote
Approx. Price: Rs 300 / PieceGet Latest Price

Product Details:

Voltage5 to 12V
recommended0.25" (6 mm)
Current Rating100-200 mA

This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a linefollowing robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.

Features:

  • Maximum recommended sensing distance: 0.25" (6 mm)
  • The module is a convenient carrier for eight IR emitter and receiver pairs evenly spaced at intervals of 0.375" (9.525 mm).
Request
Callback
Yes! I am Interested

Ultra Sonic Sensor Module Hc-Sr04

Ultra Sonic Sensor Module Hc-Sr04
  • Ultra Sonic Sensor Module Hc-Sr04
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

BrandRobodo
Detection Distance2 cm - 450 cm
Sensor AngleLess than 15 degrees
Working voltageDC 5V
Quiescent current2mA
Level output5V High 0V Low

Features

  • Stable performance
  • Measure the distance accurately
  • Precision: Blind (2cm) super close
  • Parameters
  • High: up to 0.3cm
  • Connection mode: VCC, trig (control side), echo (receiving end), GND
Request
Callback


Additional Information:

  • Item Code: HC-SR-04
Yes! I am Interested

BH1750 Light Sensing Module

BH1750 Light Sensing Module
  • BH1750 Light Sensing Module
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Weight20g
Power Supply3-5V
Data Range0-65535
Height3cm
Width2cm
Depth4cm

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier to use version of the simple foto resistor which only outputs a voltage that needs to be calculated in order to obtain meaningful data. With the BH1750 Light Sensor intensity can be directly measured by the luxmeter, without needing to make calculations. The data which is output by this sensor is directly output in Lux (Lx). When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter ,their light intensity is 1lx

Features:
  • Interface: I2C
  • Sensor built 16bitAD converter
  • Small measurement variation (+/- 20%)

Description:

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier to use version of the simple LDR which only outputs a voltage that needs to be calculated in order to obtain meaningful data. With the BH1750 Light Sensor intensity can be directly measured by the luxmeter, without needing to make calculations. The data which is output by this sensor is directly output in Lux (Lx). When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter ,their light intensity is 1lx. Sometimes to take good advantage of the illuminant, you can add a reflector to the illuminant.So that there will be more luminous flux in some directions and it can increase the ilumination of the target surface.
Request
Callback
Yes! I am Interested

Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm

Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm
  • Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm
Get Best Quote
Approx. Price: Rs 650 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Distance measuring range4 to 30 cm
Package size29.5 - 13.0 - 13.5mm5
Short measuring cycle(16.5ms)3
Distance Sensor4-30cm

DescriptionGP2Y0A41SK0F is a distance measuring sensor unit,composed of an integrated combination of PSD(position sensitive detector) , IR-LED (infrared emitting diode) and signal processing circuit.The variety of the reflective of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method.This device outputs the voltage corresponding to the detection distance. So this sensor can also be used as a proximity sensor.
Features1. Distance measuring sensor is united with PSD, infrared LED and signal processing circuit2.  Analog output type
Applications1. Cleaning robot 2. Personal robot 3. Sanitary
??? Compliant with RoHS directive (2002/95/EC)
Request
Callback


Additional Information:

  • Item Code: SHRP0430
Yes! I am Interested

Wall Mount Sound Security Light Delay Sensor Control Lamp Switch Ac 220V

Wall Mount Sound Security Light Delay Sensor Control Lamp Switch Ac 220V
  • Wall Mount Sound Security Light Delay Sensor Control Lamp Switch Ac 220V
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

BrandRobodo
Mounting TypeWall
Maximum Operating Supply Voltage220V AC
Sensor TypeProximity and Sound Detection

Features: this sensor switch will automatically turn your light on if anything moves into range or for any loud sounds making it an ideal for security.
Fit for corridors, passageways, parking basement and other places smooth automatic lighting the switch could be light-operated and voice-operated in the dark.
Operating voltage: 220v
load power: 30w
sound control sensitivity: 95db- 75db
light control induction: 6lux
delay time: 30 seconds
size (l x w x h): approx. 6 X 5 x 2.6Cm
Request
Callback
Yes! I am Interested

CJMCU-GUVA-S12SD UV Detection Light Sensor Module

CJMCU-GUVA-S12SD UV Detection Light Sensor Module
  • CJMCU-GUVA-S12SD UV Detection Light Sensor Module
Get Best Quote
Approx. Price: Rs 500 / UnitGet Latest Price

Product Details:

ColorUltra - Violet ( UV )

Features: 

1. Size: 11 mm x 27 mm

2. Low power consumption, the power supply voltage of 2.5 V ~ 5 V, working current is microamps level

3. Good linear

4. High sensitivity

5. High stability

6. Wide detection range: 240 nm to 370 nm

7. The big Angle: 130 degrees

8. Schottky type photosensitive diode, apply light electric model

 

Typical application:

Uv tester, uv watches, outdoor sports equipment, mobile phone, etc

You can use this product, especially the world only in the field of mobile phone specification.And there is a direct corresponding UV INDEX (UV INDEX) of the linear current.

 

Request
Callback


Additional Information:

  • Item Code: UVS12SD
Yes! I am Interested

Photo Control Sensor Automatic Street Light Lighting Switch Photocell Photoswitch 10A 220V

Photo Control Sensor Automatic Street Light Lighting Switch Photocell Photoswitch 10A 220V
  • Photo Control Sensor Automatic Street Light Lighting Switch Photocell Photoswitch 10A 220V
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price
  • Input Voltage: AC 220 V Max Load Current: 10A Frequency: 50-60H
  • Color: White & Blue Quantity: 1 pcs Size(Except bracket): approx. 5 x 4.2 x 3.3 cm (H x L x W)
  • Use: open during the day or night, during the day and switch off the evening off, without manual operation With design, installation, reliable, small size, light weight, easy installation, long life advantages. Widely used in street lighting, highways, factories, gardens, ports, airports, farms, parks, schools and other places.
Request
Callback
Yes! I am Interested

BH1750 FVI Digital Light intensity Sensor Breakout Board

BH1750 FVI Digital Light intensity Sensor Breakout Board
  • BH1750 FVI Digital Light intensity Sensor Breakout Board
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Accuracy+-20%
Power Supply2.4V-3.6V (typically 3.0V)
Less current consumption0.12mA
Measuring Range1-65535lx
CommunicationI2C bus

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier to use version of the simple foto resistor which only outputs a voltage that needs to be calculated in order to obtain meaningful data. With the BH1750 Light Sensor intensity can be directly measured by the luxmeter, without needing to make calculations. The data which is output by this sensor is directly output in Lux (Lx). When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter ,their light intensity is 1lx
Features
Interface: I2CPower supply :3-5vData range 0-65535Sensor built 16bitAD converterSmall measurement variation (+/- 20%)
DescriptionThis is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier to use version of the simple LDR which only outputs a voltage that needs to be calculated in order to obtain meaningful data. With the BH1750 Light Sensor intensity can be directly measured by the luxmeter, without needing to make calculations. The data which is output by this sensor is directly output in Lux (Lx). When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter ,their light intensity is 1lx. Sometimes to take good advantage of the illuminant, you can add a reflector to the illuminant.So that there will be more luminous flux in some directions and it can increase the ilumination of the target surface.
Request
Callback
Yes! I am Interested

Rotational Speed Measuring Sensor

Rotational Speed Measuring Sensor
  • Rotational Speed Measuring Sensor
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

Power supply3.3 5 V
Working Voltage3.3V to 5V.
Small Board PCB Size3.2 cm x 1.4 cm
TypeRotational Speed

Application:

Widely used in motor speed detection, pulse count, the position limit, etc.

Feature:

  • Using imported groove optical coupling sensor, width 5mm.
  • It have the output state light, if output high level, the lights are off. if output low level ,it on.
  • If it covered,it will output high level;otherwise it output low level.
  • Good signal and waveform, with strong driving ability for more than 15mA.
  • Output: digital switch output (0 and 1).
  • Equipped with a fixed bolt hole, easily install.
  • Use the LM393 wide voltage comparer.

Specification:

The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect.
DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.

Wiring specification:
  • GND Connect power negative
  • DO TTL switch signal output
  • AO This module does not work
Request
Callback
Yes! I am Interested

Color Recognition Module

Color Recognition Module
  • Color Recognition Module
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

BrandRobodo
ColorBlack
supply voltage2.7 - 5.5V
Thickness1-5 inch

The TCS3200 Colour Sensor Module uses a high quality light sensor allowing you to sense any colour through a combination of Red, Green and Blue.
The module provides all of the pins of the TCS3200 on convenient 0.1" headers - ideal for use with PCBs, breadboard or stripboard.
Four white LEDs provide plenty of light for the colour sensor and allow you to use the module in any ambient light.
The module requires only a single supply voltage between 2.7V and 5.5V - making it compatible with nearly all common microcontrollers, including PICs, AVRs, ARM, Arduino and more!
The pin out is clearly labelled on the board and is as follows:
Header one on the left side of the board:

S0: Output frequency scaling selection input (along with S1)
S1: Output frequency scaling selection input (along with S0)
OE: Output Enable - if held low, the output of the module is turned on
GND: Ground - connect to 0V
Header two on the right side of the board:

  • S3: Photodiode type (along with S2)
  • S2: Photodiode type (along with S3)
  • OUT: Output - A square wave appears here showing the intensity of the detected colour
  • VCC: Power - connect to 2.7V-5.5V
  • The Photodiode type pins allow you to pick which colour light you are currently detecting:

  • S2 S3 Photodiode type
  • Low Low Only red light
  • Low High Only blue light
  • High Low No filter
  • High High Only green light
  • By combining the reading of each of the three colours, you can identify any visible colour!

For more information on the TCS3200 module, please see the datasheet: TCS3200 Datasheet.
Request
Callback
Yes! I am Interested

650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module

650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
  • 650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
Get Best Quote
Approx. Price: Rs 30 / PieceGet Latest Price

Product Details:

Output Power5m
Wavelength650mm
Working Voltage3- 5V
Operating Current40mA

Laser Shape & Colour Red Dot Working temperature -10 ~40 Housing material Copper Dimensions 6 * 18 mm(diameter*length)Outer diameter 6mm
Request
Callback
Yes! I am Interested
X

Explore More Product



Reach Us
Sahib Chandock (Sales Head)
Bombay Electronics
13- B Shamrao Vithal Marg, Off Lamington Road
Grant Road, Mumbai - 400007, Maharashtra, India


Call Us


Send E-mailSend SMS