Bombay Electronics
Bombay Electronics
Grant Road, Mumbai, Maharashtra
GST No. 27AABPC5348L1ZO
TrustSEAL Verified
Call 08048076458 54% Response Rate
SEND EMAIL

Sensors - Load, Pressure, Flow and Vibration

Leading Manufacturer of dc 24v solenoid air valve 5 port 2 position 4v210 08, 24v dc 1/2" brass electric solenoid valve water air fuels gas normal closed new, turbidity sensor, load cell weighing sensor scale -1kg, 5kg, 10kg, yf-s403 3/4 inch water flow sensor and brass g1/4" bsp hall effect flow sensor water 0.35-3.0l/min od12 waterturbine flowmeter sen-hz41wc from Mumbai.

DC 24V Solenoid Air Valve 5 Port 2 Position 4V210 08

DC 24V Solenoid Air Valve 5 Port 2 Position 4V210 08
  • DC 24V Solenoid Air Valve 5 Port 2 Position 4V210 08
Get Best Quote
Approx. Price: Rs 650 / PieceGet Latest Price

Product Details:

MediaAir
VoltageDC 24V
Pressure resistance1.05Mpa.
effective sectional area16mm2 (cv=0. 78)
Joint pipe bore inlet=outlet1/4 inch
exhaust1/8 inch

Brand new and high quality. 
Voltage: DC 24v. 
5W position and way number two position, five way.
Media: air.  
working pressure: 0. 17~0. 7Mpa max.
Pressure resistance: 1. 05Mpa.
Fluid temperature: 5 50¡¦
effective sectional area 16mm2 (cv=0. 78)
Joint pipe bore inlet=outlet=1/4 inch,
exhaust=1/8 inch. 
Hole: r/s thread (g1/8): approx. 9. 7Mm or 0. 38Inch, 
p thread (g1/4): approx. 12. 7Mm or 0. 5Inch
a, b thread (g1/4): approx. 12. 7Mm or 0. 5Inch. 
valve body: brass. 

Package includes: 1 x solenoid air valve.
Request
Callback
Yes! I am Interested

24V Dc 1/2" Brass Electric Solenoid Valve Water Air Fuels Gas Normal Closed New

24V Dc 1/2 Brass Electric Solenoid Valve Water Air Fuels Gas Normal Closed New
  • 24V Dc 1/2 Brass Electric Solenoid Valve Water Air Fuels Gas Normal Closed New
Get Best Quote
Approx. Price: Rs 1,000 / PieceGet Latest Price

Product Details:

Working MediumAir,Water,Oil,Gas
Operating TypeDirectly driven
StateNormally closed
Flow bore16mm
CV4.8
Pipe Size1/2"
Operating ViscosityUnder 20CST

Description:

Model:2W-160-15

Working Medium: Air, Water, Oil, Gas

Operating Type: Directly driven

State: Normally closed

Flow bore: 16mm

CV: 4.8

Pipe Size: 1/2"

Operating Viscosity: Under 20CST

Operating Pressure: 0-10 Kg/cm²

Working Temperature: -5~80???

Voltage: DC24V, ±10%

Valve Body: Brass

Product type: Solenoid Valves

Request
Callback
Yes! I am Interested

Turbidity Sensor

Turbidity Sensor
  • Turbidity Sensor
Get Best Quote
Approx. Price: Rs 520 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Part NumberTSD-10
Rated VoltageDC 5V (between No #1 & Ground)
Voltage Differential3.0V - 10%
Test MethodAfter testing voltage in water (0 NTU)
Voltage test in water 4000 NTUTurbidity level Calibration - Master NTU standard liquid

Turbidity Sensors measure the amount of suspended particles, or turbidity, in the wash water of washing machines and dishwashers. The 165D6042P003 measures temperature as well as turbidity. By detecting the amount of soil in the water, appliances can conserve energy by only washing as long as necessary.


(Voltage between No #2 pin & Ground)
Operating Temperature Range
-10°C ~ 90°C
Storage Temperature Range
-20°C~ 90°C
Rated Current
Max. 30 mA
Insulation Resistance
Min 100 MO by 500V DC
Request
Callback


Additional Information:

  • Item Code: TURBS10
Yes! I am Interested

Load Cell Weighing Sensor Scale -1KG, 5KG, 10KG

Load Cell Weighing Sensor Scale -1KG, 5KG, 10KG
  • Load Cell Weighing Sensor Scale -1KG, 5KG, 10KG
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Rated Output1.0 - 0.1mV / V
Dimensions75x12.7x8mm/2.95 x 0.51 x 0.31"(L W H)
Range5 kg
ModelYZC-131A
Rated LoadAvailable in 1kg, 5kg, 10kg
Nonlinear0.05% F.S

Description
The full-bridge structure, the four leads, easy to use, plus driving voltage 5-10V, force changes in the output voltage signal directly.
Wiring: red voltage + E, black line voltage -E, green line signals + S, the white line signal -SThe sensor is fixed at one end through the screw hole, and the other end left floating state, applied according to label directions direction of gravity. In particular, note that you must not directly push the white plastic cover part, in order to avoid damage of the sensor.

Specification:
Hysteresis: 0.0% F.S
Repeatability: 0.05% F.S
Creep (5 minutes): 0.05% F.S
Temperature Effect on Output: 0.003% F.S /°C
Zero output: ± 0.2 mV / V
Input impedance: 1050 ± 10% Ω
Output impedance: 1000 ± 10% Ω
Insulation resistance: ≥2000 MΩ
Operating temperature range: -21 ~ 40°C
Recommended for: kitchen scales
Weight:21g
Request
Callback


Additional Information:

  • Item Code: LDCL005KG
Yes! I am Interested

YF-S403 3/4 inch Water Flow Sensor

YF-S403 3/4 inch Water Flow Sensor
  • YF-S403 3/4 inch Water Flow Sensor
Get Best Quote
Approx. Price: Rs 350 / PieceGet Latest Price

Product Details:

Load Capacity10 mA (DC 5V)
Working Temperature80
Maximum Operating Current15 mA DC 5 V
Working Voltage RangeDC 5 - 18 V
Working Humidity Range35%-90% RH (no frost)
Allow Pressure1.75Mpa

Water flow sensor is mainly consists of plastic valve body, rotor assembly and hall current sensor. It is installed in the hot water inlet end for detecting water flow. When water through the flow rotor assembly, magnetic rotor will rotate and Speed will change as the flow change. Hall current sensor output corresponding pulse signal and feedback to controller, then the controller will control the flow. Can be used for water heaters, credit card machines, water vending machine, flow measurement device.

Features
- Light weight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- Seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Mounted vertically, should not exceed 5 degrees inclination.
- Temperature of medium should not exceed 120 .

Cord Connection
- Red Positive(+)
- Yellow Signal output.
- Black Negative(-)

Specifications
- The lowest rated working voltage DC 4.5 5V - 24V.
- Storage temperature -25 - + 80 ° c
- Save Humidity 25% - 95% RH
- Flow range 1-60L / min
- External thread 3/4 "
- Size Approx 6.2 * 3.5 * 4.1 cm
- Output interface diameter Ca. Outside 26mm, inside 12mm, 14mm.
Request
Callback


Additional Information:

  • Item Code: YFS40312
Yes! I am Interested

Brass G1/4" BSP Hall Effect Flow Sensor Water 0.35-3.0L/min OD12 waterTurbine Flowmeter SEN-HZ41WC

Brass G1/4 BSP Hall Effect Flow Sensor Water 0.35-3.0L/min OD12 waterTurbine Flowmeter SEN-HZ41WC
  • Brass G1/4 BSP Hall Effect Flow Sensor Water 0.35-3.0L/min OD12 waterTurbine Flowmeter SEN-HZ41WC
Get Best Quote
Approx. Price: Rs 280 / PieceGet Latest Price

Product Details:

Usage/ApplicationWidely used in water industrial field,such as thermostatic water heater,water purifier,water disp
Model Name/NumberSEN-HZ41WC
MediaLiquid
MaterialBrass
Flow Range0.35 to 3.0 Liter/min.
VoltageDC 4.5 to 18 Volt
Temperature0 to 80 deg C .

Now easily measure water (liquid) flow in your application using this 1/4" Brass water flow sensor. This is good quality flow sensor with brass body and can be used for industrial and commercial applications. This 1/4 inch water flow sensor is used extensively is various types of vending machines. This water flow sensor is connected in line with the liquid whose flow rate has to be measured. There is a simple rotating wheel with a magnet and when the liquid flows the wheel is rotated and a hall effect sensor measures how many times he wheel is rotated and accordingly gives pulses. By counting the number of pulses you can easily calculate the flow rate as well as the amount of liquid dispensed. The sensor comes with a 3 pin JST connector. Red : Vcc 5 to 18 volts. Black :  Ground. Yellow : Pulse Output signal. 
Features of SEN-HZ41WC water flow sensor - Water quality requirement: Drinking water health standards, 0???80???. Flow range: 0.35 ??? 3.0 Liter/min. Withstand hydraulic pressure: ≤1.75 MPa. Voltage/electric current: DC 4.5 ??? 18 Volt, ≤15mA. Insulation resistance: >100MΩ. Electrical strength: AC500V, 50HZ. Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt. Pulse duty cycle: 50%. Flow characteristic: F=73Q, F:HZ, Q:L/min???±10%. Cumulative flow conversion: 1 Liter water=1780 pulse, accuracy: 8%. 
Application - Widely used in water industrial field, such as thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.
Request
Callback
Yes! I am Interested

SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch

SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch
  • SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch
Get Best Quote
Approx. Price: Rs 280 / PieceGet Latest Price

Product Details:

MediaLiquid
MaterialCopper
Flow Range1-30L/min.
Type1/2(External Thread Diameter).
Water quality requirementLess than 60 deg C
Maximum water pressure1.75MPa

Description : SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch. 
Specification : Material: Copper. Color: Gold. Type: 1/2(External Thread Diameter). Water quality requirement: ≤60???. Flow range: 1-30L/min. Maximum water pressure: 1.75MPa. Weight: approx 95g. 
Features : -Model:SEN-HZ21WI. -Made of copper material, environmental-friendly, really sturdy and durable. -Its maximum water pressure is 1.75MPa, the range of flow is from 1L/min to 30L/min. -Three wire connection: Red for positive pole, black for negative pole, yellow for pulse signal. -Lightweight, reasonable size,stable performance, low water pressure start,easy to install, safe to use. -Can be perfectly used for water heaters, water dispenser, water purifier, water vending machine, coffee maker, flow measurement device, water control machine and so on. 
Package Included : 1 x Water flow switch.
Request
Callback
Yes! I am Interested

Water Flow Sensor SEN-HZG1WA Pulse Output 4 to 45L/min Liquid Switch Flowmeter

Water Flow Sensor SEN-HZG1WA Pulse Output 4 to 45L/min Liquid Switch Flowmeter
  • Water Flow Sensor SEN-HZG1WA Pulse Output 4 to 45L/min Liquid Switch Flowmeter
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price

Product Details:

MediaLiquid
MaterialCopper
ModelSEN-HZG1WA
Use voltageDC 5V.
Connect wayG1",60*34*34(mm).
Working voltage rangeDC 4.5 to 18V
Max. Working current15mA.
Test range4 to 45L/min

Specification : Model : SEN-HZG1WA. Use voltage : DC 5V. Connect way : G1”,60*34*34(mm). Working voltage range : DC 4.5 ~18V. Max. Working current : 15mA. Test range : 4~45L/min(m³/h). Fit media : water. Working pressure : 1.75MPa. Outside nominal diameter : G1(mm). Instantaneous flow pulse characteristics : F=[5Q-3]±10%, F means instantaneous pulse value(Hz),Q means instant flow(L/min). Insulation resistance ≥ 100MΩ. Electric strength : AC 500V, 50Hz. Precision grade : +-10%. Working temperature : 60???. Type : vane-wheel type flowmeter. 
Features : This is a small zise product that easy to install. Made of good quality material, the product is precise and durable, no power consumption. Suitable for gas water heater, electric water heater, washer, wall-hanging stove, electromagnetic water heater, intelligent IC water meter,cooling system, circulatory system, heating equipment,etc. Three lines: red is positive, black is negative, yellow is pulse signal. 
Request
Callback
Yes! I am Interested

DN25 YF-G1 Large Flow Water Sensor

DN25 YF-G1 Large Flow Water Sensor
  • DN25 YF-G1 Large Flow Water Sensor
Get Best Quote
Approx. Price: Rs 799 / PieceGet Latest Price

Product Details:

Mini Working VoltageDC 4.5V
Working VoltageDC 5V-18V
Flow Rate Range2-100L/min
Water Pressure Resistance2MPa
Operating Temperature20-85C

Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in water dispenser or coffee machine.

Features :

  • Compact, Easy to Install
  • High Sealing Performance
  • High Quality Hall Effect Sensor
  • RoHS Compliant

Specifications :

  • Insulation resistance: = >100MΩ
  • Characteristics of Flow pulse: f=(4.8*Q) Q=L/Min
  • Accuracy: ±3%
  • Connector type: G1
Request
Callback


Additional Information:

  • Item Code: DN25-YF-G1
Yes! I am Interested

YF-S401 Water Flow Meter Hall Sensor

YF-S401 Water Flow Meter Hall Sensor
  • YF-S401 Water Flow Meter Hall Sensor
Get Best Quote
Approx. Price: Rs 375 / PieceGet Latest Price

Product Details:

Working VoltageDC 5 -24 V
Maximum Working Current15mA - 5 V DC
Flow Rate Range0.3-6L/min
Connection6mm (external diameter)
Inlet Water Pipe Diameter2.5-4mm

Water flow sensor consists of a plastic valve body, a water rotor, and a hall effect sensor - when water flows through, the internal rotator will change its speed with different rate of flow and hall effect sensor outputs the corresponding pulse signal. Use with laser cutters or CNC to measure if and how much water is flowing through laser tube or CNC spindle for cooling.

Specifications

  • Load Capacity: ≤10mA (DC 5V)
  • Operating Temperature: ≤80???
  • Liquid Temperature: ≤120???
  • Operating Humidity: 35%???90%RH
  • Water Pressure: ≤2.0MPa
  • Storage Temperature: -25???+ 80???
  • Storage Humidity: 25%???95%RH

Connections

  • Red: Power In
  • Black: Ground
  • Yellow: Signal Output
Request
Callback


Additional Information:

  • Item Code: YF-S401
Yes! I am Interested

DN40 Water Flow Sensor 5-150L/min

DN40 Water Flow Sensor 5-150L/min
  • DN40 Water Flow Sensor 5-150L/min
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Rated VoltageDC5 - 7 V
Range5-150L/min
Working VoltageDC 4.5-12 V
Low Level0.5 V

Product Description: Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.Calculation Formula :f=(0.2*Q) Q=L/Min
Note:1. When magnetic material is close with the sensor, its characteristics may vary.2. In order to avoid particle debris, the sensor must be installed after a filter.3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor''s measurement accuracy.
Features:
1. Food grade POM (polyformaldehyde) material, environmental friendly material, small, flexible and functional.2. Intubation design of inlet and outlet pipe, easy connection and operation;3. Imported Hall IC from Japan, stable and reliable;; Output voltage(rated: DC 5V); High level 4.5V and above; 8. Pulse output duty cycle: 50+-10%9. Insulation resistance: 100M Ohm and above;10. Tightness: Seal up all the holes, and inflate with 0.8MPa water, after 1 minute, no leakage and deformation;11. -20-80 centigrade;12. Hydrostatic pressure: <= 1.75MPa meet
Request
Callback


Additional Information:

  • Item Code: SEN64
Yes! I am Interested

Flex Sensor 2.2 inches and 4.5 inches

Flex Sensor 2.2 inches and 4.5 inches
  • Flex Sensor 2.2 inches and 4.5 inches
Get Best Quote
Approx. Price: Rs 350 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Weight G10 g
Product TypeFlex Sensor
Available Size2.2" and 4.5"
Thikness1-2 mm

A simple Flex Sensor which bends and flexes with physical device. As the sensor is flexed, the resistance across the sensor increases. Connector is 0.1" spaced and bread board friendly. Applications in - Robotics, Gaming (Virtual Motion), Medical Devices, Computer Peripherals, Musical Instruments, Physical Therapy

Available in 2 sizes i.e. 2.2" and 4.5"
Request
Callback
Yes! I am Interested

SparkFun Piezo Vibration Sensor

SparkFun Piezo Vibration Sensor
  • SparkFun Piezo Vibration Sensor
Get Best Quote
Approx. Price: Rs 465 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
TypePiezo Vibration
Large VoltageUp to +/-90V
Voltage Output0.1
Used Forflex, touch, vibration and shock measurements

Description: This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.
Comes with solderable crimp pins and a mass attached to the tip. This mass increases the sensitivity to motion.
Features:
Flexible PVDF Piezo Polymer FilmWide dynamic rangeLaminated for higher voltage output0.1" breadboard friendly leads
Request
Callback


Additional Information:

  • Item Code: PZVBRSM
Yes! I am Interested

Vibration Switch Sensor Module

Vibration Switch Sensor Module
  • Vibration Switch Sensor Module
Get Best Quote
Approx. Price: Rs 100 / PieceGet Latest Price

Product Details:

TypeVibration Switch
Support Input Voltage5V/3.3V
PCB Size30(mm) x15(mm)

This module features an adjustable potentiometer, a vibration sensor, and a LM393 comparator chip to give an adjustable digital output based on the amount of vibration. The potentiometer can be adjusted to both increase and decrease the sensitivity to the desired amount. The module outputs a logic level high (VCC) when it is triggered and a low (GND) when it isn’t. Additionally there is an onboard LED that turns on when the module is triggered.

  • On-board LM393 voltage Comparator chip and Vibration sensing probe
  • On-board the output signal indication,output effective signal is high level, and the same time the indicator light up, output signal can directly connect with microcontroller IO.
  • Signal detection sensitivity can be adjusted.
  • Reserved a line voltage compare circuit. (P3 is leaded out).
Request
Callback
Yes! I am Interested

Force Sensor Resistor 0.5 inch 14.7mm Pressure Sensor

Force Sensor Resistor 0.5 inch 14.7mm Pressure Sensor
  • Force Sensor Resistor 0.5 inch 14.7mm Pressure Sensor
Get Best Quote
Approx. Price: Rs 550 / PieceGet Latest Price

This is a force sensitive resistor with a round, 0.5″ diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area.

The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Two pins extend from the bottom of the sensor with 0.1″ pitch making it bread friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR. Just Connect a resistor to form a voltage divider and measure the voltage at the junction to find the force applied.

These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.

This sensor can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi, etc. using an Analog to Digital Converter (ADC).

Applications:
  1. Testing and Measurement Equipment.
  2. Embedded Electronics.
  3. OEM Development Kit.
  4. Consumer Electronics.
  5. Multimeter.
Features:

 

  1. Easily customizable to a wide range of sizes.
  2. Cost-effective.
  3. Ultra-thin: 0.45 mm.
  4. Robust: up to 10 million actuations.
  5. Simple and easy to Integrate.
Request
Callback
Yes! I am Interested

Force Sensor Resistor Square 38.1mm - Pressure Sensor

Force Sensor Resistor Square 38.1mm - Pressure Sensor
  • Force Sensor Resistor Square 38.1mm - Pressure Sensor
Get Best Quote
Approx. Price: Rs 380 / PieceGet Latest Price

This is a force sensitive resistor with a square, 1.75 x 1.5″, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ.

This FSR can sense applied force anywhere in the range of 100g-10kg. Two pins extend from the bottom of the sensor with 0.1″ pitch making it bread friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.

Just Connect a resistor to form a voltage divider and measure the voltage at the junction to find the force applied. These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.

Dimensions: Overall length: 3.5″ Overall width: 1.75″ Sensing area: 1.75×1.5″

This sensor can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

Applications:
  1. Testing and Measurement Equipment.
  2. Embedded Electronics.
  3. OEM Development Kit.
  4. Consumer Electronics.
  5. Multimeter.
Request
Callback
Yes! I am Interested

Water Flow Sensor

Water Flow Sensor
  • Water Flow Sensor
Get Best Quote
Approx. Price: Rs 170 / PieceGet Latest Price
Water Flow Sensor And Fluid Flow Meter Control Switch YFS201

Water flow sensor can be used to measure the flow of liquids, i.e. the consumption of liquids in industrial or domestic usage. For example you can make a robotic cocktail dispensing machine, and can use this sensors to accurately measure components like Soda, Water, etc. Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal.

I believe using this should be simple, you just need to connect to Arduino interrupt pin 2, and can measure the number of PWM pulse/interrupt per unit of time. The water flow would be directly proportional to the number of measured pulses.

Connection details:

  • Red wire is +5V
  • Black wire is GND
  • White wire is PWM signal output
Request
Callback


Additional Information:

  • Item Code: YF-S201
Yes! I am Interested

Floating Straight Automatic Water Level Control For Water Tank-14014449MG

Floating Straight Automatic Water Level Control For Water Tank-14014449MG
  • Floating Straight Automatic Water Level Control For Water Tank-14014449MG
Get Best Quote
Approx. Price: Rs 375 / PieceGet Latest Price

Product Details:

MediaWater

Description:This Valve Is The Replacement Of The Traditional Float Ballcock, Which Can Be Applied To Various Systems Of High Water Tanks, Pools, Water Towers Of The Industry And Civil Construction, Etc. 
Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop. 
Four Intakes, Large Volume Of Water. 
Beautiful Appearance, Small Size, Practical, Simple Installation. 
Without Electricity, Easy To Use, Long Life, Low Failure Rate, Saving Water Resources. 
Working Pressure Range: 0.2-10Kg. 
Applicable Medium: Clean Water. 
Applicable Medium Temperature: ≤70???. 
Resistance To High Temperature Medium Temperature: 70???~120??? Material: Nylon Pa66, Stainless Steel Screws, Food Grade Rubber. 
Size(L*W): Approx. 83*71Mm / 3.27*2.8Inch. 
Diameter: Approx. 46Mm / 1.81Inch. 
When The Pool Or Tank Water Levels Fall, The Valve Body Will Sink Down And Then The Forerunner Of The Control Valve Will Be Opened. As The Pipe Water Pressure Affects, The Seal Face Of Control Valve Will Be Opened. Finally The Water Comes Out And Vice Versa.  

Note : 
If The Water Quality Is Not Good, Then The Valves Need To Be Maintained Properly. 
If The Users Find The Time Of Adding Water Becomes Longer, He Can Just Upload The Water Inlet And Make It Washed. 
Package Includes : 
1 X Water Level Control Valve. 
Request
Callback
Yes! I am Interested

Water Float Sensor P-43

Water Float Sensor P-43
  • Water Float Sensor P-43
Get Best Quote
Approx. Price: Rs 120 / PieceGet Latest Price

Product Details:

BrandBombay Electronics
Voltage2.4V-5.5V
PCB Board Size49.3 mm x64.5 mm
Cable Length30.5(cm)
Maximum Load50 W
Max Switching Voltage100V DC
Minimum Voltage250V DC
Maximum Switching Current0.5 A
Max Load Current1.0 A

A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.

A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be. It can be easily converted from normally open to normally close by inverting the float.

Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.

 

Specifications:-

 

  • Cable Length: 30.5(cm)
  • Maximum Load: 50 W
  • Max Switching Voltage: 100V DC
  • Minimum Voltage: 250V DC
  • Maximum Switching Current: 0.5 A
  • Max Load Current: 1.0 A
  • Max Contact Resistance: 0.4 ΩTemp Rating: -20~ 80 degree

 

 

 

Applications:-

 

  • House hold Equipment such as overhead water tanks,Water purifiers.
  • Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or what ever your project may be. Up float switch Contains no mercury Product.

 

Request
Callback
Yes! I am Interested

G3/4 Thread Water Flow Sensor Switch Control Meter Flowmeter 1-30L/min SEN-HZ43WB

G3/4 Thread Water Flow Sensor Switch Control Meter Flowmeter 1-30L/min SEN-HZ43WB
  • G3/4 Thread Water Flow Sensor Switch Control Meter Flowmeter 1-30L/min SEN-HZ43WB
Get Best Quote
Approx. Price: Rs 450 / PieceGet Latest Price

Product Details:

Usage/ApplicationWidely used in water industrial field,such as thermostatic water heater,water purifier,water disp
MediaLiquid
Flow Range2 to 45 Liter/min
Water quality requirement0 to 80 deg C .
Voltage/electric currentDC 4.5 to 18 Volt,less than 15mA.
Pulse duty cycle50%

Now easily measure water (liquid) flow in your application using this 3/4" Brass water flow sensor. This is good quality flow sensor with brass body and can be used for industrial and commercial applications. This three forth inch water flow sensor is used extensively is various types of vending machines. 
This water flow sensor is connected in line with the liquid whose flow rate has to be measured. There is a simple rotating wheel with a magnet and when the liquid flows the wheel is rotated and a hall effect sensor measures how many times he wheel is rotated and accordingly gives pulses. By counting the number of pulses you can easily calculate the flow rate as well as the amount of liquid dispensed. 


The sensor comes with a 3 pin JST connector. 
Red : Vcc 5 to 18 volts. 
Black :  Ground. 
Yellow : Pulse Output signal. 


Specifications of 3/4 inch SEN-HZ43WB Water Flow Sensor :- 
Water quality requirement: Drinking water health standards, 0???80???. Flow range: 2???45 Liter/min. Withstand hydraulic pressure: ≤1.75 MPa. Voltage/electric current: DC 4.5 ??? 18 Volt , ≤15mA. Insulation resistance: >100MΩ. Electrical strength: AC500V, 50HZ. Output level: Rated voltage DC 5 Volt, high level ≥4.5 Volt, low level ≤0.5 Volt. Pulse duty cycle: 50%. Flow characteristic: F=8.1Q-3, F:HZ, Q:L/min???±10%. Cumulative flow conversion: 1 Liter water=477 pulse, accuracy: 10%. 

Applications :- 
Widely used in water industrial field, such as thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc. 
Request
Callback
Yes! I am Interested

Water Float Sensor Black

Water Float Sensor Black
  • Water Float Sensor Black
Get Best Quote
Approx. Price: Rs 95 / PieceGet Latest Price

Product Details:

Usage/ApplicationLiquid Level Measurement

A float sensor is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices. Magnetic float sensor is an electromagnetic ON/OFF switch. It helps to sense the level of water present in the overhead tank or sump. These sensors has a permanent magnet in the float. The Switch is present in the white stem of the sensor. As the float rises or falls with level of water in the tank, the switch gets activated by the magnet in the float, thereby the signal which is obtained from the sensors is used along with the water level controllers for controlling the motor pump.

Features:

  • No electrical contact with water.
  • Shock proof
  • Corrosion free and rust free
  • Sensor with 1.5 meter cable
Request
Callback
Yes! I am Interested

Force Sensing Resistor Small 0.2

Force Sensing Resistor Small 0.2
  • Force Sensing Resistor Small 0.2
Get Best Quote
Approx. Price: Rs 440 / UnitGet Latest Price

Product Details:

No of pin2 Pin

This is a force sensor resistor having a round sensing area of 0.2″ diameter. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).
Request
Callback
Yes! I am Interested

SEN-PPI35 PP Aquarium Liquid Water Level Sensor Float Switches Normally Open

SEN-PPI35 PP Aquarium Liquid Water Level Sensor Float Switches Normally Open
  • SEN-PPI35 PP Aquarium Liquid Water Level Sensor Float Switches Normally Open
Get Best Quote
Approx. Price: Rs 120 / PieceGet Latest Price

Product Details:

MaterialPlastic
Usage/ApplicationCan activate a pump,an indicator,an alarm or other device

Description : 
- SEN-PPI35 mini water float switch. - The switch can be used to sense the level of liquid in a tank. - Can activate a pump, an indicator, an alarm or other device. 
Specification : 
- Model: SEN-PPI35. - Thread: M10. - Max. working current: 0.5A. - Max. Contact Resistance: 0.2Ω. - Wiring Type: 2 wire output. - Working Voltage: DC 110V. - Contact form: NO (Normally Open). - Temperature: -20???-80???. - Material: plastic. - Switch Length: 61mm/2.1inch. - Cable Length: 340mm/13.4inch. 
Package Includes : 
1 Piece Water Level Sensor Switch.
Request
Callback
Yes! I am Interested

SEN-PPI150 PP Vertical Magnetic Water Float Level Switch

SEN-PPI150 PP Vertical Magnetic Water Float Level Switch
  • SEN-PPI150 PP Vertical Magnetic Water Float Level Switch
Get Best Quote
Approx. Price: Rs 240 / PieceGet Latest Price

Product Details:

MaterialPlastic
Usage/ApplicationThe switch can be used to sense the level of liquid in a tank. Can activate a pump,an indicator

Model Number : SEN-PPI150. Color : Plastic white color. Installation method : vertical. 10W, Normally open type. Material : Plastic PP. Specifictation : float ball diameter 24mm, fixed screw M10. Switch response time : 0.2ms. Rated voltage : Below DC24V.
Request
Callback
Yes! I am Interested

Anti-Corrosion Water Level Sensor with Ball Float Switch

Anti-Corrosion Water Level Sensor with Ball Float Switch
  • Anti-Corrosion Water Level Sensor with Ball Float Switch
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

MaterialPlastic

The Anti-Corrosion Water Level Sensor with Ball Float Switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or another device. 
Use them in hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or whatever your project may be. 
Package Includes : 1 x Anti-Corrosion Water Level Sensor with Ball Float Switch.
Request
Callback
Yes! I am Interested

Afr-2000 G1/4'' Air Compressor Water Filter with Regulator Air Tool Cleaning

Afr-2000 G1/4'' Air Compressor Water Filter with Regulator Air Tool Cleaning
  • Afr-2000 G1/4'' Air Compressor Water Filter with Regulator Air Tool Cleaning
Get Best Quote
Approx. Price: Rs 450 / PieceGet Latest Price

Features:

  • AFR2000 air filter regulator is that adjust The main channel of air pressure to a pressure value what the control device required after filtration through decompression. 
  • No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure
  • Light weight, small size, easy installation and maintenance
  • Can filter small particles, keep the air clean
  • If the output pressure is higher than the set pressure, the discharge pressure of the atmosphere to maintain a stable output
  • Application:air compressors, pneumatic tools and other gas connection installation, effectively filter the air moisture.


Specifications: 

  • Model: AFR2000 (AFR is the model, 2000 refers to the port size)
  • Material: body (aluminum die-casting products), Yung cup (polycarbonate)
  • Fluid: Air
  • Port size: G1 / 4
  • Filtration precision: 5μm
  • Operating pressure range: 0 ~ 1.0MPa (manual drain: 0-9.5kgf / cm2, differential pressure discharge: 1.5-9.5kgf / cm2)
  • Temperature: 5 ~ 60 °
  • Gauge caliber: G1 / 8
  • Treatment cup capacity: 15CM3
  • Length: appox 15cm
  • Installation and Use :
    The direction shown by the arrow on the valve body is installed, which is the direction of the gas flow direction.


Package Included:

  • 1pcs Filter regulator
Request
Callback
Yes! I am Interested
X

Explore More Product



Reach Us
Sahib Chandock (Sales Head)
Bombay Electronics
13- B Shamrao Vithal Marg, Off Lamington Road
Grant Road, Mumbai - 400007, Maharashtra, India


Call Us


Send E-mailSend SMS