Quadcopter

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multicopters that require the 6ch operation.

This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a computer.

Features : 

1. Super active and passive anti-jamming capabilities.
2. Very low power consumption.
3. High receiving sensitivity.
4. 8 model memory, digital control.
5. Can be programmed by PC with included software.
6. Full range 2.4GHz 6-channel radio.
7. 4-Model
8. 4 Types (Airplane, Heli90, Heli120, Heli140).
9. Integrated
10. Contrast Adjustment.
11. Throttle cut.
12. Computer
13. USB Socket.
14. Use a linear spread of fine paragraph by excess antenna.
15. It covers the entire band width of he antenna bandwidth range.
16. High quality and stability.

Package Includes :

1 x FS-CT6B Transmitter

1 x FS-r6B Receiver

1 x USB Interface Cable

1 x Software CD

1 x Receiver Binding Cable

 

1 x User Manual

Product Details:

Model : D2822Volts : 7.4 - 11.1KV : Available in 1100, 1400, 1800KVWeight : 38gMotor Size : 28x22 mmShaft Size : 3.175x37mmMax Power : 102 wattESC : 30A

Additional Information:

• Item Code: D2822

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. This is a great entry-level radio for those just starting in the field of drones flying due to the ease of use of this product and an impressive list of features for a first-time radio. FlySky FS-i6 2.4G 6CH PPM RC Transmitter is a 6-channel telemetry 2.4GHz transmitter that uses the reliable Automatic Hopping Digital System (AFHDS) and includes such features as digital trims, backlit LCD screen, and simple programming.

On top of this, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400g and so won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch as well as two adjustable knobs for flight modes/ multiple flap positions.

You also get the new FS-iA6B receiver with this kit. This is a compact 6-channel receiver with a range exceeding 500m and it comes with a dual antenna for excellent reception and interference rejection capabilities.  Each transmitter has a unique ID and so when binding, the receiver remembers this ID and accepts data from that transmitter only. This avoids picking up other transmitter signals and dramatically decreases inference and increases safety.

Specifications and Features :Features:

1. Entry-level 6 channel 2.4GHz radio with telemetry capability.
2. Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches.
3. Easy to use Programming & Navigation Buttons.
4. Supports Heli/Standard Wing/Elevon/V-Tail.
5. 20 Model Memory.
6. 8 Character Model Name.
7. Trainer and charging ports.
8. The backlit LCD screen displays real-time transmitter and receiver voltage.
9. 4 Stick Mode Selectable.
10. Mode 2.
11. It comes with a receiver.

Product Details:

This Telemetry radio set allows you to link to a flight controller such as our Ardupilot Mega 2.6 or Multiwii AIO via a USB equipped device such as a computer, laptop or tablet supporting a USB connection (OTG). The Radio set not only lets you see live data such as live GPS position overlaid on a map (if the flight controller has the GPS option) to system voltage, heading, waypoint navagation even artificial horizon and so much more, using open source MAVlink based ground station software. You can even fly your aircraft with a joystick via your computer and update settings live! Or just use it for your DIY projects that needs a wireless Serial interface. This kit offers a great low price, longer range (approx one mile with supplied antennas) and superior performance. The system utilizes the 433Mhz band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware.

The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and configuration of system parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

Interface to the module is via standard 5V-tolerant TTL serial / FT232 USB serial.

*2Km range is only possible when used in proper wether condition, very low air data rate and line of sight Ground-Air. With default settings and full transmit power on both ends the range is around 300-500 meters.

Features:

• Very small size
• Light weight (under 4 grams without antenna)
• 433Mhz frequency band
• Receiver sensitivity to -117 dBm
• Transmit power up to 20dBm (100mW)
• Transparent serial link
• Air data rates up to 250kbps
• Range of approx 1 mile with supplied antennas
• Demonstrated range of several kilometers with a small omni antenna
• Can be used with a bi-directional amplifier for even more range
• MAVLink protocol framing and status reporting
• Frequency hopping spread spectrum (FHSS)
• Adaptive time division multiplexing (TDM)
• Support for LBT and AFA
• Configurable duty cycle
• Built in error correcting code (can correct up to 25% data bit errors)
• Open source firmware
• AT commands for radio configuration
• RT commands for remote radio configuration
• Adaptive flow control when used with APM
• Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF microcontroller.
• Upgraded to more convince Molex 1.25mm

Specifications:

• Band: 433MHz
• Antenna connectors: RP-SMA connector
• Output power: 100mW (20dBm), adjustable between 1-20dBm
• Sensitivity: -117dBm sensitivity
• Interface: Standard TTL UART
• Connection status: LED indicators

Includes:

• Radio Telemetry base station (USB Connection)
• Telemetry Transceiver (Pin Header)
• lead set x1
• Antenna x 2

Product Details:

Electronic Speed Controller (ESC) 30A is a electronic circuit to vary the speed, direction and possible to act as a dynamic brake, of a Brushless Motor. This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv).

 

Keeping our harmonization with the market defined quality parameters; we are widely reckoned for providing a flawless array of Electronic Speed Controller ESC 30A to our respected clients. Our offered speed controllers are highly known in electronic industries for controlling the speed. Apart from this, we ensure to deliver these products within stipulated time frame.

Features:

• Dimensional Accuracy
• Fine finish
• Affordable

Product Details:

This is a well thought out quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon.Leveraging upon our skilled and accomplished personnel, we are voluntarily engaged in manufacturing, supplying and trading a best grade range of Quad Copter Frame in the national market. These products are sternly checked by our quality analyzers on various parameters to make sure their defect free delivery at customers end. Along with this, these products are available at very cost effective prices.

Features:

• Built from quality glass fiber and polyamide nylon.
• Integrated PCB connections for direct soldering of your ESCs
• Pre-threaded brass sleeves for all of the frame bolts.
• Colored arms for orientation to keep you flying in the right direction.
• Large mounting tabs on main frame bottom plate for easy camera mounting.
• Easy assembly.

Specifications:

• Height: 55mm
• Weight: 270g (w/out electronics)
• Motor Mount Bolt Holes: 16/19mm

Product Details:

LIPO battery fast charging with wide AC input. An internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA per cell. Double color LED can display the process of charging (RED: charging; GREEN: full). This

charger is compact and light; especially there is separated corresponding balance port for each battery pack.

Product Details:

LIPO Battery available in a wide variety of specifications - 

Product Details:

The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don't let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

 

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

Additional Information:

• Item Code: KKMNFLYTCTRL

Product Details:

Ardupilot Mega (APM) is a professional quality IMU autopilot that is based on the Arduino Mega platform. This autopilot can control fixed-wing aircraft, multi-rotor helicopters, as well as traditional helicopters. It is a full autopilot capable for autonomous stabilisation, way-point based navigation and two way telemetry with Xbee wireless modules. Supporting 8 RC channels with 4 serial ports.

Product Details:

Brand Name:DYS
Item NO.:MB30030
Model: 30A ESC
Categories: Speed controller

Features:

• Drive tube and high-power Mos, and Mos tube plus a separate heat sink, Extreme low output resistance of the PCB(printed circuit board),super current endurance.
• The power input uses extreme low output resistance greatly enhance the power stability, and has the protective effect on the battery.
• Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start the motor immediately, to avoid personal injury.
• Separately voltage regulator IC for microprocessor. providing good anti-jamming capability.
• Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
• Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control to more precise.

Package Included:

1x DYS 30A brushless ESC

Additional Information:

• Item Code: 30A-ESC

Product Details:

A2212 BLDC Motor for Quadcopter available in below KV - 
1) 1000KV 
2) 1400KV
3) 1800KV
4) 2200KV

Product Details:

The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. CC3D CopterControl Hardware

Features:

Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac and Linux.
Direct high speed USB support with no drivers required, a truly plug and play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.

Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.
 
Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.
 
The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
 
Sensors and Components
3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz
Installation settings for CC3D flight controller,click here.
 
Package included:

• 1 x CC3D Flight Controller
• 1 x Wire connector
• 1 x flight controller case

Additional Information:

• Item Code: OPCC3DFC

Product Details:

Motor Description:
Motor Weight: about 5g
Operating Voltage range: 3v to 3.7v DC
Rated Speed - 39000 RPM 
Dimensions Available - 
1. 7x16mm 
2. 7x20mm
3. 8.5x20mm
4. 10x20mm

Additional Information:

• Item Code: 2C08520P75

Product Details:

The latest version of the popular IMAX B6AC has arrived and now boasts some unique new features. The latest V2 Model now offers PC connectivity which allows the user to control the charger via your home computer and upgrade the firmware as and when necessary.The B6AC V2 now gives you the ability to adjust the terminal voltage, which makes the charger the perfect charging solution for heavy duty batteries.
The B6AC V2 can also be used as a Lithium battery meter / internal resistance meter and boasts additional functions which include, automatic charging current limit, capacity limit and processing time limit, making the B6AC V2 one of the safest chargers available today.
Features:• PC connectivity• Microprocessor controlled• Delta-peak sensitivity• Individual cell balancing• Li-ion, LiPo and LiFe capable• Ni-Cd and NiMH capable• Large range of charge currents and automatic charge current limit• Store function, allows safe storage current• Time limit function• Input voltage monitoring (Protects car batteries at the field)• Data storage (5 pack memory)• Battery break in and cycling.• Terminal voltage adjustment for heavy duty batteries
Package Includes: 1 x IMAX B6AC V2 Charger1 x DC Jack plug to crocodile clips1 x male
T connector charge lead to 4mm banana plugs 1 x XT60 charge lead 1 x JST charge lead1 x Crocodile clip charge lead1 x Futaba style charge lead1 x Mains power lead (US type)

Additional Information:

• Item Code: IMAXB6AC

Product Details:

The IMAX B6 is a very advanced charger, able to charge, balance and discharge LiIon, LiPoly, LiFe (A123), NiCd and NiMH batteries. It is microprocessor controlled just like all the best chargers and will balance the indervidual cells in you Li-XX batteries. It will charge from 0.1 to 5.0A and is capable of charging packs up to 6S packs. It features input voltage protection so as not to flatten your car battery at the field and will also storage charge you packs for when you are not using them. You can power it with any power supply delivering from 11~18V so it is very flexible.
Features:
• Microprocessor controlled
• Delta-peak sensitivity
• Individual cell balancing
• LiIon, LiPoly and LiFe capable
• NiCd and NiMH capable
• Large range of charge currents
• Storage charge function
• Time limit function
• Input voltage monitoring (Protects car batteries at the field)
• Data storage (Store up to 5 packs in its memory)
• Battery break in and cycling.

Additional Information:

• Item Code: IMAXB6

Product Details:

Features:

• Light weight, small size, long lifetime
• Easy modification
• 1.5mm carbon fiber fuselage
• Machine arm 3.0mm,reducing vibration
• AV shockproof ball
• FPV installed by edition
• For 250 C250
• Material: Glass Fiber

Package Includes:

• 1 x QAV250 Quadcopter Frame kit

Ublox Neo 7M GPS module that includes an HMC5883L digital compass.  The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz.  This GPS module also comes with a molded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.

This Ublox Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.   This Ublox Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings.  Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This GPS module includes two cables, a 6pin connector for the GPS module and a 4 pin connector for the i2c compass. Robu.in

Note:

• APM 2.5 and APM 2.0 have an internal compass (unlike APM 2.6) which must be disabled by cutting a trace before you can connect the 3DR UBlox GPS + Compass module (the video here shows how).
• Other than disabling the internal compass, connecting the UBlox is the same for APM2.0/APM2.5 as for APM2.6.

 Features :

1. Locate performance
2. These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
3. Super Bright LED
4. Backplane with Standard Mk style mounting holes 45mm X 45mm
5. 38400 bps (Default) Changed to 115200bps!
6. Output GGA, GSA and RMC frames
7. 1Hz (Default) Changed to 5Hz!
8. Permanent Configuration Retention
9. compass on board
10. 6 pin connector for EZ connect to MEGA BLACK
11. 4 pin connector for only GPS use
12. 4 pin connector for compass only use
13. Can use both 4 pin at once.

Product Details:

The pack includes two propeller blades with adapters (1 CW and 1 CCW), similar to the photo displayed (color might be different)

Description -

The propeller(s) are avalilable in the following sizes :

• 5 x 4.5 aka 5045 + 5045R
• 6 x 4.5 aka 6045 + 6045R
• 7 x 4.5 aka 7045 + 7045R
• 8 x 4.5 aka 8045 + 8045R
• 9 x 4.5 aka 9045 + 9045R
• 10 x 4.5 aka 1045 + 1045R
• 12 x 4.5 aka 1245 + 1245R

Set of counter rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters. You receive 2 propellers: one propeler rotates clockwise ( CW ) and the other propeler rotates counter clockwise ( CCW ) (1 left hand 1 right hand rotation). These matched rotor blades are a hard to find matched counter rotating pair.

for Eg.
in a 10 x 4.5 aka 1045 + 1045R set the length is 10 inches and the pitch is 4.5 inches per revolution.

Product Details:

F550 is a multi-rotor designed for all pilots for fun or AP. With DJI WKM or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other activities. Made by advanced engineering material, super strong & smooth Kit (need assemble by yourself ). New design PCB board special for F550, support standard flight controller like MK, KK, FF, MWC, APM.

Package Includes :

6 x Flame Wheel (2 Red, 2 Black, 2 White)

1 x F550 Top Plate

1 x F550 Bottom Plate

2 x Small Bag of Screws

Product Details:

Deans Plug T connectors sold as matching male-female pairs and have a current rating of 50 A . They are the smallest high-current connectors we know of , and they are great for projects that involve bigger motors and controllers . Often used to connect batteries in radio control models .

Product Details:

LIPO Battery Voltage Tester and low voltage buzzer alarm combo is easy to use. can save your model/batteries and investment. This is a new product combining all the voltage measurements with low-voltage alarm function. Li-Po Battery Voltage Buzzer+Indicator: directly plug it into your operating battery, it will monitor the conditions of your battery all the time, so your batteries shall remain within safe operating voltage range at all times.

Features:

• Low voltage Buzzer alarm mode for 2-8S.
• With a push key by which you can change the value settings and save.
• When voltage is below the set value, it will buzzer very loudly with red LED light. (pre-set value is 3.3V)
• Mini shape, no larger than a common key.
• Compact, easy to carry.
• Really useful in flight if you can't see the lights.
• Use for 1-8s Lipo/Li-ion/LiMn/Li-Fe.
• Voltage detection precision: ±0.01V
• Unit voltage display range: 0.5-4.5V
• Total Voltage display Range: 0.5-36V
• 1S test mode voltage range: 3.7-30V
• 1S test mode detection precision: ±0.5%

Additional Information:

• Item Code: LPVTSTBZ

Product Details:

Durable with high quality Adopts the integral design for more effective protection to motor shaftThe design of a new type of impeller seat for more stable performance and more convenient disassembly

The 0.2mm core to lower load temperature and increase efficiency
Range of use for DJI F330 ZMR250 H250

Additional Information:

• Item Code: MX18062280

Product Details:

Universal Tall Landing gear skids for DJI F450 F550 SK480 FPV aerial photo.

Easy for install on the DJI F450 F550 or similar frame . Available with 4pcs for one full set .

Additional Information:

• Item Code: TLNDNGRQC