Bombay Electronics
Bombay Electronics
Shamrao Vithal Marg, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Stepper Driver & Module

Providing you the best range of a3967 easy stepper motor driver v44, mach3 interface board for 5 axis cnc, a4988 ( with heat-sink ) ( red ), drv8825 step stick, tb6560 stepper motor driver and tb6600 stepper motor drives with effective & timely delivery.

A3967 Easy Stepper Motor Driver v44

A3967 Easy Stepper Motor Driver v44
  • A3967 Easy Stepper Motor Driver v44
Get Best Quote
Approx. Price: Rs 239 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P150 to 750 mA / Phase
Clock I / PDigital 0 to 5 V ( 3.3 V) Pulse
Voltage7 to 30 V
Input TypeDC

The EasyDriver is a simple to use stepper motor driver , compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver) .
MS1 and MS2 pins broken out to change microstepping resolution to full , half , quarter and eighth steps ( defaults to eighth ) . Compatible with 4 , 6 , and 8 wire stepper motors of any voltage . Adjustable current control from 150mA / Phase to 750mA / Phase . Power supply range from 7V to 30V . The higher the voltage , the higher the torque at high speeds . Size: 4.8 cm x 2 cm
Request
Callback


Additional Information:

  • Item Code: EZA3967V44
Yes! I am Interested

MACH3 Interface Board for 5 Axis CNC

MACH3 Interface Board for 5 Axis CNC
  • MACH3 Interface Board for 5 Axis CNC
Get Best Quote
Approx. Price: Rs 735 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
ApplicationTo directly control the Stepper Drivers & Controllers via the PC

The latest upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller, such as TB6560, M542, M542H, MA860H, 2M542, 2M982, DM542(A), DM860(A) etc. single axis stepper driver controller series. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc

Features -

  • Maximum support 5-axis stepper motor driver controllers
  • Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
  • USB power supply and peripherals powered phase are separated to protect computer security.
  • All the signals are opto-isolated which can protect your computer security.
  • 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
  • Wide input voltage range: 12-24V, and with anti-reverse function.
  • One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
  • Output 0-10V analog voltage for inverter to control the spindle speed.

Specifications -

  • Input Power - USB port to directly get power from PC and 12-24V power supply(optional)
  • Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
  • Driver type - Pulse and Direction signal control
  • Net/Total Weight - Approx 75g
  • Dimensions - 90 * 70 * 20mm (L*W*H)

Package Includes -

  • 1pcs MACH3 Interface Board
  • 1pcs USB wire
Request
Callback


Additional Information:

  • Item Code: MACH3BRD
Yes! I am Interested

A4988 ( with Heat-Sink ) ( Red )

A4988 ( with Heat-Sink ) ( Red )
  • A4988 ( with Heat-Sink ) ( Red )
Get Best Quote
Approx. Price: Rs 125 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / Pupto 2 A
Pulse I / PDigital 0 to 5 V ( 3.3 V) Pulse
MicroStepping Division16

The A4988 is a complete micro stepping motor driver with built-in converter, easy to operate. The products can be in full, half, 1/4, 1/8 and 1/16 step mode of operation bipolar stepper motor, output drive performance up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode
Request
Callback


Additional Information:

  • Item Code: A4988STP02
Yes! I am Interested

DRV8825 Step Stick

DRV8825 Step Stick
  • DRV8825 Step Stick
Get Best Quote
Approx. Price: Rs 170 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P1.5 A ( up to 2.2 A with proper cooling )
Dimension20 mm x 15 mm x 12 mm
Voltage8.2 to 45 V
Input TypeDC

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The DRV8825 features adjustable current limiting, over current and over temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Request
Callback


Additional Information:

  • Item Code: DRV8825
Yes! I am Interested

TB6560 Stepper Motor Driver

TB6560 Stepper Motor Driver
  • TB6560 Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 685 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P3 A ( peak 3.5 A )
MicroStepping Division16
Dimension75 mm x 50 mm x 35 mm
Voltage10 to 35 V DC
Phase2 / 4

Very easy to use, no instructions, all of use are marked on the board . With large heat sink to ensure good heat dissipation . Input signal high-speed optocoupler isolation, guarantee not losing steps . Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function . Attenuation model adjusted for all the motors can be locked when no noise .
Working voltage :DC 10V-35V.Recommend Switching Power Supply DC24V6N137 high-speed Opto Coupler , to ensure a high speed without step out.New original Toshiba TB6560AHQ chip, low-voltage shutdown, of overheating parking and over-current protection circuit to ensure optimal performance.Rated output: ± 3A ,peak 3.5A.For 42,57,86 Stepper within 3A 2/4 -phase / 4 wire / 6 wire stepper motor, not fit for more than 3A stepper motor.Automatic half-decay.Excitation Mode: synchronizing, half step, 1/8 step, 1/16 step, a maximum of 16 segments.Volume: 50 x 75 x 35 ( MM)

Characteristics : the current level adjustable to meet your various application needs. the Automatic half-decay adjustable. 6N137 high-speed optical coupling, to ensure a high speed not step out. thick tooth radiators, good heat dissipation.
Request
Callback


Additional Information:

  • Item Code: TB6560
Yes! I am Interested

TB6600 Stepper Motor Drives

TB6600 Stepper Motor Drives
  • TB6600 Stepper Motor Drives
Get Best Quote
Approx. Price: Rs 1,451 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P4 A
MicroStepping Division32
Voltage9 to 42 V
Input TypeDC
Phase2 / 4

TB6600 stepper motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis NEW upgraded version of the 42/57/86 stepper motor .

Package includes:

1pcs TB6600 4-aixs stepper motor driver

Detailed Description

This drive is an upgraded version of TB6600, segment increased to 32 segments, suitable for high subdivision applications . Suitable for step motor:57, 42, 86Type 4 phase 2 phase (4 line 6 line 8)
1. 9V-42V DC power supply .
2. H bridge bipolar constant current drive .
3. the biggest4.0AEight kinds of output current are optional .
4. the biggest32To subdivide6 kinds of subdivision modes selectable .
5. input signal high speed photoelectric isolation .
6. a total of standard single pulse interface .
7. offline retention function .
8. semi enclosed casing can adapt to more stringent environment .
9. provide energy saving half automatic current lock function .
Request
Callback


Additional Information:

  • Item Code: TB6600
Yes! I am Interested

Lead Shine DM320c

Lead Shine DM320c
  • Lead Shine DM320c
Get Best Quote
Approx. Price: Rs 2,099 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P0.3 to 2 A
Pulse Frequency70 KHz
Dimension86 mm x 55 mm x 20 mm
Isolation Resistance500 MOhm
Voltage20 to 30 V
Input TypeDC
Phase2 / 4

The DM320C is a versatility fully digital stepping driver based on a DSP with advanced control algorithm. The DM320C is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM320C an ideal solution for applications that require low-speed smoothness.
Request
Callback


Additional Information:

  • Item Code: LSDM320C
Yes! I am Interested

Leadshine DM542 Stepper Motor Drives

Leadshine DM542 Stepper Motor Drives
  • Leadshine DM542 Stepper Motor Drives
Get Best Quote
Approx. Price: Rs 3,390 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P1 to 4.2 A
Pulse Frequency300 KHz
Dimension118 mm x 76 mm x 33 mm
Isolation Resistance500 MOhm
Voltage20 to 50 V
Input TypeDC
Phase2 / 4

The DM542 is an economical microstepping driver based on patented technology of Leadshine. It is suitable for driving 2-phase and 4-phase hybrid stepping motors. By using the advanced bipolar constant-current chopping technique, it can output more speed and torque from the same motor compared with traditional drivers, such as L / R drivers. Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Request
Callback


Additional Information:

  • Item Code: LSDM542
Yes! I am Interested

Leadshine DMA860H Stepper Motor Driver

Leadshine DMA860H Stepper Motor Driver
  • Leadshine DMA860H Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 6,999 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Current O / P1.8 to 7.2 A
Pulse Frequency300 KHz
Isolation Resistance500 MOhm

The DMA860HH is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjustcurrent control parameters) according to different motors, the driven motors can run with smallernoise, lower heating, smoother movement and have better performances at higher speed than mostof the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Features
l High performance, cost-effective
l Supply voltage up to 80VAC or +110VDCl Output current up to 7.2A
l Self-adjustment technologyl Pure-sinusoidal current control technology
l Pulse input frequency up to 300 KHzl TTL compatible and optically isolated input
l Automatic idle-current reduction
l 16 selectable resolutions in decimal andbinary, up to 51,200 steps/rev
l Suitable for 2-phase and 4-phase motorsl Support PUL/DIR and CW/CCWmodes
l Short-voltage, over-voltage, over-currentand short-cicuit protection
Request
Callback


Additional Information:

  • Item Code: LSDMA860H
Yes! I am Interested

DM1182 Leadshine Stepper Motor Driver

DM1182 Leadshine Stepper Motor Driver
  • DM1182 Leadshine Stepper Motor Driver
Ask For Price
Product Price :Get Latest Price

The DM1182 is a high voltage, versatility fully digital stepping drive based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-test and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers on the markets. Its unique features make the DM1182 an ideal solution for applications that require low-speed smoothness.

Features

· Extra-low motor noise offers excellent quietness

· Anti-Resonance, provides optimum torque and nulls mid-range instability

· Self-test and Auto-configuration technology, offers optimum responses with different motors

· Microstep resolutions programmable, from full-step to 102,400 steps/rev

· Supply voltage up to 150 VAC

· Output current programmable, from 0.5A to 8.2A

· Pulse input frequency up to 200 KHz

· Automatic idle-current reduction

· Supports PUL/DIR and CW/CCW modes

Request
Callback
Yes! I am Interested

DM2282 Leadshine Stepper Motor Driver

DM2282 Leadshine Stepper Motor Driver
  • DM2282 Leadshine Stepper Motor Driver
Ask For Price
Product Price :Get Latest Price

The DM2282 is a high voltage, versatility fully digital stepping driver based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers on the markets. Its unique features make the DM2282 an ideal solution for applications that require low-speed smoothness.

Features

· Extra-low motor noise offers excellent quietness

· Anti-Resonance, provides optimum torque and nulls mid-range instability

· Self-test and Auto-configuration technology, offers optimum responses with different motors

· Microstep resolutions programmable, from full-step to 102,400 steps/rev

· Supply voltage up to 220 VAC

· Output current programmable, from 0.5A to 8.2A

· Pulse input frequency up to 200 KHz

· Automatic idle-current reduction

· Supports PUL/DIR and CW/CCW modes

Request
Callback
Yes! I am Interested

3DM683 Leadshine Stepper Motor Driver

3DM683 Leadshine Stepper Motor Driver
  • 3DM683 Leadshine Stepper Motor Driver
Ask For Price
Product Price :Get Latest Price
The 3DM683 is a versatility fully digital stepping driver based on a DSP with advanced control algorithm. The 3DM683 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the 3DM683 an ideal solution for applications that require low-speed smoothness. Compared to the 3ND583, broader input voltage and output current ranges make the 3DM683 can drive much more motors than the 3ND583.

Features
l Anti-Resonance, provides optimum torqueand nulls mid-range instability
l Motor self-test and parameter auto-setuptechnology, offers optimum responses withdifferent motors
l Multi-Stepping allows a low resolution stepinput to produce a higher microstep outputfor smooth system performance
l Microstep resolutions programmable, from200 to 102,400 steps/revl Supply voltage up to +60 VDCl Output current programmable, from 0.5A to8.3A
l Pulse input frequency up to 200 KHz
l TTL compatible and optically isolated input
l Automatic idle-current reductionl Suitable for 3/6 leads Three-phase motors
l Support PUL/DIR and CW/CCWmodes
l Over-voltage, over-current, phase-errorprotections
Request
Callback
Yes! I am Interested

L298N DC Motor Driver Controller Stepper Motor Board Module

L298N DC Motor Driver Controller Stepper Motor Board Module
  • L298N DC Motor Driver Controller Stepper Motor Board Module
Get Best Quote
Approx. Price: Rs 342 / PieceGet Latest Price
The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability.

Features:

  • Driver: L298N Dual H Bridge DC Motor Driver IC
  • Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V
  • Driven part of the peak current Io: 2A
  • The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)
  • The logical part of the operating current range: 0 ~ 36mA
  • Storage temperature: -25 Deg C ~ +130 Deg C
  • Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
  • Driver Board Size: 55mm * 60mm * 30mm
  • Drive plate Weight: 33g

Other Function:

Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.
Request
Callback
Yes! I am Interested

VNH2SP30 - Monster Moto Shield 30A Mini Stepper Motor Driver

VNH2SP30 - Monster Moto Shield 30A Mini Stepper Motor Driver
  • VNH2SP30 - Monster Moto Shield 30A Mini Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 399 / PieceGet Latest Price
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires. 
Note:When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system) However, when using the board at currents up to 6A the chips will barely become noticeably warm. 
Features: 
Voltage max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 m (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown Package Included:
1 x 30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Shield module For Arduino
Request
Callback


Additional Information:

  • Item Code: VNH2SP30
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

ULN2003 Stepper Motor Driver Module

ULN2003 Stepper Motor Driver Module
  • ULN2003 Stepper Motor Driver Module
Get Best Quote
Approx. Price: Rs 99 / PieceGet Latest Price
Brand new and high quality Stepper motor driver board with ULN2003.It has a standard interface for plug and play.Size(L x W x H): Approx. 3 x 3 x 1cm / 1.2 x 1.2 x 0.4inchA, B, C, D four-phase LED indicates the status of the stepper motor work.
Package Includes:
1x Stepper Driver Module Board ULN2003
Request
Callback


Additional Information:

  • Item Code: ULN2003
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

CNC 4 Axis Controller DSP Controlled - TB6560 Stepper Motor

CNC 4 Axis Controller DSP Controlled - TB6560 Stepper Motor
  • CNC 4 Axis Controller DSP Controlled - TB6560 Stepper Motor
Get Best Quote
Approx. Price: Rs 5,799 / PieceGet Latest Price
TB6560 4 axis cnc controller 4 axis stepper motor driver DSP controlled Replaced by TB6560 for MACH3  Detailed Description Model:TB6600 4-aixs stepper motor controller  Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5Ω,the receiving end of 0.4Ω, low voltage shutdown, thermal parking and circulationcircuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A3.3A 4A 4.5A to accommodate more and different motor Current.  The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.  
1.The inductive DC-DC stepdown module, computer terminal and then using the power isolation module design, just to run a set of power input, the input voltage of 24V-40V allows high voltage input, completely beyond TB6560, TB6560 of the input voltage. typically 24V.
2.Increase the external signal input optocoupler used in all optical coupling isolation input.
3.Increase the simulation 0-10V output, combined with MACH3 software to control the drive spindle speed.
4.add a select group of relay outputs (can output two relays, control the two different devices, load isolation, P9 pin relay 1, relay 2 pin P16, P17 cited relay 3 setting foot)
5.Increase the 20-pin multi-connector, docking can be a variety of signal input control (direct signal input with the handle or Weihong card), you can use the microcontroller, ARM, DSP control.
6.Add the buffer chip signal, amplifies the external signal, increasing the accuracy of the pulse.
7.E-type bottom oversized aluminum heat sink to ensure the full capacity 24 hours, the temperature is very low (which can add a fan or other cooling device).
Request
Callback


Additional Information:

  • Item Code: 4AXISTB6560
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

CNC 3 Axis Controller Board For Mach3 KCAM4 EMC2 - TB6560 St

CNC 3 Axis Controller Board For Mach3 KCAM4 EMC2 - TB6560 St
  • CNC 3 Axis Controller Board For Mach3 KCAM4 EMC2 - TB6560 St
Get Best Quote
Approx. Price: Rs 4,499 / PieceGet Latest Price
Specifications:
1. For toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset
2. 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step
3. Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
4. Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment
5· On board current switching - Power output can be set according to specific user requirement
6· Full closed-type optical isolation to protect the user's computer and equipment
7· Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
8· 4 channel inputs interface- Can be used for XYZ limit and emergency stop
9· Professional design - Two stage signal processing with super anti-jamming
10· Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect
11· Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop
12· Universal architecture - Supports most parallel software MACH3, KCAM4, EMC2 etc!

Package included:1x TB6560 mould1 x DB25 parallel cable 
Attention:Power supply DC 12-36V (not included)*Voltage Selection:12-16V DC power supply for Nema 17 stepper motors16-24V DC power supply for Nema 23 stepper motors24-36V DC power supply for Nema 34 stepper motors(High voltage will burn up the chips or stepper motors!!!)*Ampertage Selection:Output current of the power supply can be calculated by the following expressions:Output current = Rated current of your stepper motors * quantity + 2A(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good.If you are not sure about the selection of power supply, please feel free to contact us for help)The power output of 12V shall be applied to the radiator fan of 12VDriver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.Suitable for unipolar or bipolar stepper motors.Voltage regulated spindle speed controlled by parallel interface as function of supply voltage. Specifications:Electrical properties (ambient temperature Tj = 25 pm)Input Power12 - 36V DC power supply Stepper motor drive current3A (peak value 3.5A)/axis Drive type Double-pole constant flow PWM actuation outputCompatible Stepper motors2/4 Phase, 4/6/8 leads stepper motors within 3.5A *Simple solutions if the driver does not work properly:Please double check the software settings according to the Fig.5 and Fig.6Please conform the parallel cable has been pluged tightlyPlease turn off the power supply before changing dip settingsPlease use stable high quality DC power supply for this driverProblems in Mach3 using, Please refer to the Mach 3 User Manual
Request
Callback


Additional Information:

  • Item Code: 3AXISTB6560
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
X

Explore more products



Reach Us
Sahib Chandock (Sales Head)
Block 13-B & C, Shamrao Vithal Marg, Off Lamington Road Grant Road East, Opposite Shamrao Vithal Post Office
Mumbai- 400007, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS