Bombay Electronics
Bombay Electronics
Shamrao Vithal Marg, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Module - Wireless

Leading Manufacturer of xbee s2 module, ask transmitter & receiver, sim900 gsm gprs module, bluetooth module, hc-05 wireless bluetooth rf transceiver module serial/ttl/rs and uart to wifi hlk-rm04 ethernet module from Mumbai.

XBee S2 Module

XBee S2 Module
  • XBee S2 Module
Ask For Price
Product Price :Get Latest Price

This is the new 2.4GHz XBee XB24-BWIT-004 module from Digi. Series 2.5 improves on the power output and data protocol. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.


Specifications:-


  • 3.3V @ 40mA
  • 250kbps Max data rate
  • 2mW output (+3dBm)
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration

AT or API command set

Request
Callback
Yes! I am Interested

ASK Transmitter & Receiver

ASK Transmitter & Receiver
  • ASK Transmitter & Receiver
Get Best Quote
Approx. Price: Rs 145 / PairGet Latest Price
We are indulged in providing our customers with a perfect quality ASK Transmitter and Receiver which is highly acknowledged and known for their sturdy construction and fine finish. These products are manufactured and developed by using best grade raw material and cutting edge technology. These products are highly famous among our patrons.

Features:

  • Resistance against corrosion
  • Smooth surface
  • Long lasting life

 

WSTX01 and WSRX02 are low cost ASK transmitter modules which are based on RFIC which minimizes the board size and improve the stability against interferences. The transmitter modules work in very wide voltage range so they are very suiable for battery-driven applications. It can be used together with WSTX01 and WSRX02 to construct simple and short range wireless control system.


Specifications for transmitter(WSTX01):

  • Frequency Range: 434 MHz
  • Modulate Mode: ASK
  • Date Rate: 8kbps
  • Supply Voltage: 3-12V

 

Specifications for receiver(WSRX02):

  • Frequency Range: 434/315 MHz
  • Modulate Mode: ASK
  • Date Rate: 8kbps
  • Supply Voltage: 3-5.5V
  • High Sensitivity: -113dBm for 315MHz / -110dBm for 434MHz.

 

 

Request
Callback


Additional Information:

  • Item Code: ATR01
  • Minimum Order Quantity: 1 Pair
Yes! I am Interested

SIM900 GSM GPRS Module

SIM900 GSM GPRS Module
  • SIM900 GSM GPRS Module
Ask For Price
Product Price :Get Latest Price

Dual band (900MHz/1800MHz) GSM GPRS Module with very advance SIM900/Sim900A GSM module. The modem follows plug and play operation with on board RS232 interface for communication and follows standard AT command set. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily. The modem can either be connected to PC serial port directly or to any microcontroller. It can be used to send and receive SMS or make/receive voice calls. It can also be used in GPRS mode to connect to internet and do many applications for data logging and control. In GPRS mode you can also connect to any remote FTP server and upload files for data logging.

 

Supports features like Voice, SMS, Data / Fax, GPRS and integrated TCP/IP stack. It works on frequencies EGSM 900Mhz, DCS 1800Mhz and PCS1900Mhz.

 

Specifications:

 

  • Data / Fax , SMS , GPRS
  • Integrated TCP / IP stack Features
  • Quad Band GSM / GPRS 850 / 900 / 1800 / 1900 MHz
  • GPRS multi - slot class 10 / 8 GPRS Mobile station class B Compliant to
  • GSM Phase 2 / 2 + Class 4 (2W@850 / 900 Mhz) Class 1 (1W@1800 / 1900 Mhz)
  • Control via AT commands (GSM 07.07 , 07.05 and enhanced AT commands)
  • Operation Temperature (-20 deg C to +55 deg C) Specifications for Voice Tricodec.
  • Half rate (HR) Full rate (FR) Enhanced Full rate (EFR) Hands-free operation(Echo suppression)
  • Specifications for Fax Group 3
  • Class 1 Specifications for data GPRS class 10: max 85.6 kbps (downlink)
  • PBCCH support Coding schemes CS 1 , 2 , 3 , 4 CSD up to 14.4 kbps USSD Non transparent mode
  • PPP - Stack

 

 

 

Request
Callback


Additional Information:

  • Item Code: SIM900A
Yes! I am Interested

Bluetooth Module

Bluetooth Module
  • Bluetooth Module
Ask For Price
Product Price :Get Latest Price
Module is compliant with SPP and can function as an interface with a host via UART port. As per the requirement, these modules can be used as master or slave. As a master SSP equipment, module searches all the working SPP slave devices surrounding from which host can select the device of choice. While, when working on slave mode, module can receive connection requests from another SPP master devices.


Applications:

 

  • Hand held terminals Industrial devices
  • Point-of-sale systems
  • PCs and Computer accessories
  • Access points
  • Personal Digital Assistants (PDAs)
  • Automotive diagnostics units

Specifications:

  • Supply Voltage Range: 3V to 3.6V
  • Data Rate: 3Mbps
  • Modulation Type: DPSK, DQPSK
  • Operating Frequency: 2.402GHz to 2.48GHz
  • Transmit Power: 16.5dBm
  • Physical Interfaces: UART, USB
  • Bluetooth Version: Bluetooth 2.0 + EDR
  • Bluetooth Class: Class 1
  • Receive Sensitivity: -88dBm
  • Bluetooth 2.0 & EDR Certification
  • Full Bluetooth Data Rate
  • Low Current Consumption
  • Operating Temperature Range: -20°C to +75°C
Request
Callback
Yes! I am Interested

HC-05 Wireless Bluetooth RF Transceiver Module Serial/TTL/RS

HC-05 Wireless Bluetooth RF Transceiver Module Serial/TTL/RS
  • HC-05 Wireless Bluetooth RF Transceiver Module Serial/TTL/RS
Get Best Quote
Approx. Price: Rs 280 / UnitGet Latest Price

This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.

*support Master and Slave mode, modify by AT commander

Product Description -

The Bluetooth UART RS232 serial Converter Module can easily transfer the UART data through the wireless Bluetooth,without complex PCB layout or deep knowledge in the Bluetooth software stack, you can combine this bluetooth module with your system:

 

MCU, ARM or DSP systems.

GPS navigation system

Water and electricity gas meter reading system

SOC systems.

Personal Digital Assistants (PDAs)

Computer Accessories

Other systems your want to use under bluetooth functions.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

UART to WiFi HLK-RM04 Ethernet Module

UART to WiFi HLK-RM04 Ethernet Module
  • UART to WiFi HLK-RM04 Ethernet Module
Get Best Quote
Approx. Price: Rs 1,499 / UnitGet Latest Price
Support the AP (wireless access point), the Client (Client), the Repeater (wireless relay), Bridge (wireless Bridge), the Router (wireless Router) five working mode
AP mode - the default work mode. This mode device is a wireless access point, support plug and play, no configuration.
The Router mode - this mode device is equivalent to a wireless Router, the wired interface as the WAN, the wireless LAN. Multiple wireless clients can share a broadband link on the Internet.
Repeater mode, use of equipment of the wireless relay function, realizes the wireless signal relay and amplified, and form a new wireless coverage area, finally achieve the goal of extending wireless network coverage.
Bridge model, use of equipment of Bridge function, first RM04 set up a wireless connection with the front end of wireless network, a wireless signals, and then itself to form a new wireless coverage, can effectively solve the problem of weak signal and signal blind spots, such as wireless coverage.
Client work mode - in this mode the AP for the AP is wireless Client, equivalent to a wireless network card.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

XBee & ZigBee Adapter Board

XBee & ZigBee Adapter Board
  • XBee & ZigBee Adapter Board
Get Best Quote
Approx. Price: Rs 245 / UnitGet Latest Price
XBee and ZigBee Adapter Board with USB interface

This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The board is powered by the USB cable.XBee modules and USB cable are sold separately.

Features:
• USB Connectivity
• USB Powered.
• Small footprint.
• All XBee pins broken out.
• Reset button
• Onboard 3.3V regulated supply.
• Small footprint.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

SKG13BL GPS Receiver Module with GPS Antenna

SKG13BL GPS Receiver Module with GPS Antenna
  • SKG13BL GPS Receiver Module with GPS Antenna
Get Best Quote
Approx. Price: Rs 1,199 / UnitGet Latest Price
The SkyNav SKG13C is a complete GPS engine module that features super sensitivity, ultra low power and small form factor. The GPS signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface with NMEA protocol or custom protocol. It is based on the high performance features of the MediaTek 3329 single-chip architecture, Its –165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense foliage environment where the GPS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems. Applications LBS (Location Based Service) PND (Portable Navigation Device) Vehicle navigation system Mobile phone Features Ultra high sensitivity -165dBm Extremely fast TTFF (Time To First Fix) at low signal level Low power consumption Typical 45mA@3.3V NMEA-0183 compliant protocol or custom protocol Operating voltage 3.0V to 4.2V Operating temperature range -40 to 85 SMD type with stamp holes Small form factor 15x13x2.7mm RoHS compliant (Lead-free)
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

ESP8266 Serial ESP-01 WIFI Wireless Transceiver Module

ESP8266 Serial ESP-01 WIFI Wireless Transceiver Module
  • ESP8266 Serial ESP-01 WIFI Wireless Transceiver Module
Get Best Quote
Approx. Price: Rs 179 / UnitGet Latest Price

ESP-01 ESP-8266 is an ideal choice for hobbyist to start experimenting with IOT. The dimension of this module is 25mm x 15mm, with simple pin connections (standard 2×4 pin headers), using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the WiFi module.

ESP8266 ESP-01 Serial WIFI Transceiver Module is a cheap and easy way to connect to internet via WIFI to any microcontroller platforms like Arduino. You can use AT commands to connect to WiFi networks and open TCP/IP connections (without need to have TCP/IP stack running in microcontroller).

The module(ESP-01) can work with AT command when used with Arduino, USB to TTL adaptor (FTDI USB module is recommended). Additional power supply might be needed to power upthe board.With GCC toochain and SDK availability opportunities with ESP8266 as a IOT device is endless.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

ESP8266 ESP-12E Serial WiFi Wireless Transceiver SMD Module

ESP8266 ESP-12E Serial WiFi Wireless Transceiver SMD Module
  • ESP8266 ESP-12E Serial WiFi Wireless Transceiver SMD Module
Get Best Quote
Approx. Price: Rs 195 / UnitGet Latest Price

ESP8266-12E is an enhanced version ESP8266-12, improve peripheral circuitry increases impedance matching, the signal output is better, whether it is stable or anti-jamming capability, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added six IO ports on the basis of the ESP-12, SPI leads.

ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

HM-10 BLE 4.0 Bluetooth Module

HM-10 BLE 4.0 Bluetooth Module
  • HM-10 BLE 4.0 Bluetooth Module
Get Best Quote
Approx. Price: Rs 415 / UnitGet Latest Price

If you are in need of such a 4.0 BLE Bluetooth module, MCU can be set up,also can controlled by a remote Bluetooth device for setting,can transfer data, and can remotely control 10 PIO pins,so,the best choice is HM-10 bluetooth module. can replace HC-05, HC-06, HC-07 etc.

Support Central and Peripheral mode switch, modify by AT commander.

Support Remote control mode, remote device can control PIO pin or modify settings by AT commander when Connected. (such as Iphone4s/5 ipad, Note2 etc.)

 

 

The Bluetooth UART RS232 serial Converter Module can easily transfer the UART data through the wireless Bluetooth, without complex PCB layout or deep knowledge in the Bluetooth software stack, you can combine this bluetooth module with your system:

  • MCU, ARM or DSP systems.
  • SOC systems.
  • Personal Digital Assistants (PDAs)
  • Computer Accessories
  • Other systems your want to use under bluetooth functions.

 

Device Features:

  • CC2541 Bluetooth Chip Solution
  • Fully Qualified Bluetooth V4.0 Ble
  • Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
  • Increadible samll size with 3.3V input, and RoHS Compliant
  • UART interface and with baudrate setup function
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

Ublox NEO-6M GPS Module - Flight Control

Ublox NEO-6M GPS Module - Flight Control
  • Ublox NEO-6M GPS Module - Flight Control
Get Best Quote
Approx. Price: Rs 950 / UnitGet Latest Price

The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings.

The antenna is connected to module through ufl cable which allow for flexibility in mounting the gps such that the antenna will always see the sky for best performance. This make it powerful to use with cars and other mobile applications.

The Ublox gps module has serial TTL output, it has four pins:TX, RX, VCC and GND. You can download the u-center software for configuring the gps and changing the settings and much more. It is really good software.

Features

  • Cold start time of 38 s and Hot start time of 1 s
  • Supply voltage: 3.3 V t
  • Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
  • SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
  • 5Hz position update rate
  • Operating temperature range: -40 TO 85°C
  • UART TTL socket
  • EEprom to save configuration settings
  • Rechargeable battery for Backup
  • Separated 18X18mm GPS antenna
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

EM-18 RFID Card Reader

EM-18 RFID Card Reader
  • EM-18 RFID Card Reader
Ask For Price
Product Price :Get Latest Price

This is a low frequency (125 KHz) RFID Reader with Serial Output with at range of 8-12cm. It is a compact unit with built in antenna and can be directly connected to the

PC using RS232 protocol. This product is a kind of play and plug device with a reading range of 8 to 10 cm and can be availed in the following specifications.

 

Specifications:

Voltage: 5 Vdc

Current: <50ma

Operating Frequency: 125 kHz

Read Distance: 8 to 10 cm

Size: 32 mm (length), 32 mm (width), 8 mm (height)

Serial Output

 

Buzzer Indication

Request
Callback
Yes! I am Interested

ESP - 8266 13 IOT

ESP - 8266 13 IOT
  • ESP - 8266 13 IOT
Get Best Quote
Approx. Price: Rs 250 / UnitGet Latest Price
ESP-13 is Wi-Fi serial transceiver module, based on ESP8266 SoC. The SOC has Integrated TCP/IP protocol stack. It is TTL serial communication interface and its parameters can be set by AT command. It is widely used in networking, smart home project when it is connected to the Wi-Fi router. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, and controlling home appliances by the mobile phone.

Features:

  • Communication interface voltage: 3.3V;
  • Design enhancements: With a new 4-layer design, compared to the previous 2-layer board, stability, anti-interference ability and quality is better;
  • IO Port Package: SMD available, and the pin pitch is 1.5mm;
  • Antenna Type: Built-in PCB antenna is available ;
  • Wireless Network Mode: station / softAP / SoftAP + station;
  • Wireless criteria: 802.11 b / g / n;
  • Wi-Fi @ 2.4GHz, support for WPA / WPA2 security mode;
  • It is very easy to develop projects with AT command;

Application:

  • Home automation, sensor networks, industrial wireless control.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

MFRC-522 RC522 RFID RF IC Card Sensor Module

MFRC-522 RC522 RFID RF IC Card Sensor Module
  • MFRC-522 RC522 RFID RF IC Card Sensor Module
Ask For Price
Product Price :Get Latest Price
MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the "Three Tables" application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1 encryption algorithms, terminology validation MIFARE products. MFRC522 supports MIFARE Series higher speed non-contact communication, two-way data transfer rates up to 424kbit / s. As a highly integrated 13.56MHz card reader new family of chips, MF RC522 MF RC500 and MF RC530 and there are many similarities, but also have many features and differences. It is between the host communication using SPI mode, helps to reduce connection, reduce PCB board size and cost.
Request
Callback
Yes! I am Interested

RFID - 1 KiloByte Slim Cards

RFID - 1 KiloByte Slim Cards
  • RFID - 1 KiloByte Slim Cards
Ask For Price
Product Price :Get Latest Price
This is a blank 13.56MHz RFID/NFC card - often used for train/bus passes but also found in other systems where a proximity card is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

RFID chip specification:

  • 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
  • Built in encryption engine with 48-bit key
  • 4 Byte unique identifier burned into the chip
  • 13.56 MHz frequency

Specification:

  • 85.5mm x 54mm x 1mm /3.36" x 2.1" x 0.03"
  • 6.3 grams / 0.2 oz
  • Works about 4" away from reader
Request
Callback
Yes! I am Interested

RFID - 125KHz Access Card

RFID - 125KHz Access Card
  • RFID - 125KHz Access Card
Ask For Price
Product Price :Get Latest Price
Description:

  • White card
  • 125KHZ chip material type: EM4100,
  • Card thickness:1.8mm
  • Distance of reaction:6 -10cm
  • Encapsulation materials: PVC. ABS
  • Typical application: Timecard,Access Control Card ,enterprise one card system etc.EM Card EM4100 Pvc Card 125KHZ RFID Card
Request
Callback
Yes! I am Interested

XBee / ZigBee Pro Module - Series 2C / S2C with Wire Antenna

XBee / ZigBee Pro Module - Series 2C / S2C with Wire Antenna
  • XBee / ZigBee Pro Module - Series 2C / S2C with Wire Antenna
Get Best Quote
Approx. Price: Rs 2,599 / UnitGet Latest Price
This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. Please refer to the XBee/XBee-PRO ZB (S2C) product manual for more information.

 

Features:

3.3V @ 120mA
2.7V-3.6V working voltage
250kbps Max data rate
63mW output (+17dBm)
1 mile (1600m) range
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
128-bit encryption
Local or over-air configuration
AT or API command set
External Antenna Required
Documents:

Digi XBee Series 2C Page
Datasheet
XBee / XBee-PRO ZigBee (S2C) TH Migration Guide
X-CTU Software
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

NRF24L01 Wireless Transceiver Module 2.4GHz Antenna

NRF24L01 Wireless Transceiver Module 2.4GHz Antenna
  • NRF24L01 Wireless Transceiver Module 2.4GHz Antenna
Get Best Quote
Approx. Price: Rs 83 / UnitGet Latest Price
Features:

  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
  • 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control.
  • Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna
  • Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
  • Built-in voltage regulator
  • Standard DIP Pitch Interface for embedded applications

Technical Parameters:

  • Input Voltage: 1.9 ~ 3.6V
  • Size: 34mm X 17mm X 1mm
  • Package Contents:
  • 1pcs x NRF24L01+ 2.4GHz Wireless Transceiver Module
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

XBee / ZigBee Module - Series 2C / S2C with Wire Antenna

XBee / ZigBee Module - Series 2C / S2C with Wire Antenna
  • XBee / ZigBee Module - Series 2C / S2C with Wire Antenna
Get Best Quote
Approx. Price: Rs 1,150 / UnitGet Latest Price
XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.

XBee 802.15.4 modules seamlessly interface with compatible gateways, device adapters and range extenders, providing developers with true beyond-the-horizon connectivity. The updated XBee S2C 802.15.4 module is built with the SiliconLabs EM357 SoC and offers improved power consumption, support for over-the-air firmware updates, and provides an upgrade path to DigiMesh® or ZigBee® mesh
protocols if desired.

Features

Simple, out-of-the-box RF communications, no configuration needed
Point-to-multipoint network topology
2.4 GHz for worldwide deployment
Common XBee footprint for a variety of RF modules
Industry leading sleep current of sub 1uA
Firmware upgrades via UART, SPI or over the air
Migratable to DigiMesh and ZigBee PRO protocols and vice-versa
Application Ideas

Remote industrial control and monitoring
Long range remote control
Wireless data acquisition
Note: Because XBee modules have 2 mm pin spacing, we recommend one of our adapter boards for each module. Our adapter boards provide several advantages to the XBee modules such breadboard-friendly standard 0.1 inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board (# 32400) so you can easily configure and test each XBee module prior to putting it in a point-to-point application.

Note: We offer this XBee model as replacement/upgrade for the XB24-AWI-001, #32405 (read about the XBee product line changes here).
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

NodeMCU CH340G ( with ESP8266 )

NodeMCU CH340G ( with ESP8266 )
  • NodeMCU CH340G ( with ESP8266 )
Get Best Quote
Approx. Price: Rs 345 / UnitGet Latest Price
  • Use CH340G repalce the CP2102.
  • Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
  • Arduino-like hardware IO
  • Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
  • Code like arduino, but interactively in Lua script.
  • Nodejs style network API
  • Event-driven API for network applicaitons,which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.Greatly speed up your IOT application developing process.
  • Lowest cost WI-FI
  • Less than $3 WI-FI MCU ESP8266 integrated and esay to prototyping development kit.
  • We provide the best platform for IOT application development at the lowest cost.
Request
Callback


Additional Information:

  • Item Code: NMCH340G
  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

XBee Pro w/o Wire Antenna - Series 2C (ZigBee Mesh)

XBee Pro w/o Wire Antenna - Series 2C (ZigBee Mesh)
  • XBee Pro w/o Wire Antenna - Series 2C (ZigBee Mesh)
Get Best Quote
Approx. Price: Rs 2,699 / UnitGet Latest Price
This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. Please refer to the XBee/XBee-PRO ZB (S2C) product manual for more information.

Features:

  • 3.3V @ 120mA
  • 2.7V-3.6V working voltage
  • 250kbps Max data rate
  • 63mW output (+17dBm)
  • 1 mile (1600m) range
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
  • External Antenna Required

Documents:
  • Digi XBee Series 2C Page
  • Datasheet
  • XBee / XBee-PRO ZigBee (S2C) TH Migration Guide
  • X-CTU Software
Request
Callback


Additional Information:

  • Item Code: XBP24CZ7UIT
  • Minimum Order Quantity: 1 Unit
Yes! I am Interested
Approx. Price: Rs 950 / PieceGet Latest Price
This relay module is 12V active low, and each one needs 15-20mA driver current. Uses two 8-channel ULN2803APG darlington arrays chip to control relay module. It is a 16-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. The working status indicator lights are conducive to the safe use. Widely used for all MCU control, industrial sector, PLC control, smart home control. 
Specifications: Working voltage: 12V Channel: 16 channel Item size: 17.6 * 9 * 1.7cm / 6.93 * 3.54 * 0.67in Item weight: approx 240g / 8.47oz Package weight: approx 251g / 8.86oz
Request
Callback
Yes! I am Interested

SIM800A Module / Shield for Arduino UNO R3

SIM800A Module / Shield for Arduino UNO R3
  • SIM800A Module / Shield for Arduino UNO R3
Get Best Quote
Approx. Price: Rs 1,186.8 / PieceGet Latest Price
This module is built with SIMCOM Make SIM800 Quad-band GSM/GPRS engine, works on frequencies 850 MHz, 900 MHz, 1800 MHz and 1900 MHz. It is very compact in size and easy to use as plug in GSM Modem.The baud rate is configurable from 9600-115200 through AT command.Initially Modem is in Auto baud mode.The modem needs only two wires (Tx, Rx) except Power supply to interface with microcontroller/Host.

Features:

  • High Quality Product (Not hobby grade).
  • Quad-Band GSM/GPRS 850/ 900/ 1800/ 1900 MHz.
  • 5V interface for direct communication with MCU kit.
  • Configurable baud rate.
  • SMA connector with GSM L Type Antenna.
  • Built in SIM Card holder.
  • Built in Network Status LED.
  • Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
  • Input Voltage: 9V-12V DC.
  • Headphone jack for audio out.
  • Li-Po battery 3.7 volt pins for supply.
  • Li-Po battery USB charger (3.7volts).
  • CP2102 port for communication with laptop.

Figure in the listing shows the pinout of GSMsim800 for testing follow the given steps:

•   12v supply is given to the DC jack.

•   Inset the simcard.

•   Then push switch to ON.

•   Then power LED is ON , as well as buzzer is ON.

•   There is another two LEDs will on , One is for network selection(Yellow) and

•   Another for range selection(Green).range LED blinks fast that means range is selected.

•   Make connection with PC through TTL .

•   Open hyperterminal and check through commands.

•   When make a call for that no , buzzer is getting ON.
Request
Callback
Yes! I am Interested

SIM28 GPS Modem

SIM28 GPS Modem
  • SIM28 GPS Modem
Get Best Quote
Approx. Price: Rs 995 / UnitGet Latest Price
The GPS smart receiver features the 16 channels .Ultra low power GPS architecture. This complete enabled GPS receiver provides high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities.
 
Feature

  • 6-channels GPS search engine
  • ?? Ultra low power design (38mA, typical)
  • ?? Compact size
  • ?? Built-in low noise, high gain active antenna
  • ?? Super-cohesive magnetic for installation
  • ?? High sensitivity (up to -152dBm typ)
  • ?? Apply to host devices with USB or RS232
 
Technical specification

  • Operating voltage: 12v dc.
  • Compatible with TTL serial.
  • Frequency  l1, 1575.42mhz 
  • C/a code  1.023mhz chip rate
  • channel  16 channels all in view

Applications

  • Automotive
  • Personal/Portable Navigation (PDA)
  • Geographic Surveying
  • Sports and Recreation etc.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

Ethernet Module ENC28J60

Ethernet Module ENC28J60
  • Ethernet Module ENC28J60
Get Best Quote
Approx. Price: Rs 228 / UnitGet Latest Price

The board 25MHZ crystal.

The network interface board HR911105A.

3.3 V power supply pin Specifications:

Size: 58*34*17 mm

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Unit
Yes! I am Interested

Nano V3 Ethernet Shield ENC28J60 Module for Nano 3.0

Nano V3 Ethernet Shield ENC28J60 Module for Nano 3.0
  • Nano V3 Ethernet Shield ENC28J60 Module for Nano 3.0
Get Best Quote
Approx. Price: Rs 899 / PieceGet Latest Price
ENC28J60 Ethernet Shield for Arduino Nano 3.0 RJ45 Webserver Module
controller: Microchip's ENC28J60 ethernet / HR911105A works as server or client comes with efficient library and examples direct plug puzzle board, NO soldering needed.1 x Mini ENC28J60 Webserver Module Ethernet Shield Board For Arduino Nano v3.0 CF
Request
Callback


Additional Information:

  • Item Code: ENC28NANO
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

ESP8266 12E 10A 220V Network Relay WIFI Module

ESP8266 12E 10A 220V Network Relay WIFI Module
  • ESP8266 12E 10A 220V Network Relay WIFI Module
Get Best Quote
Approx. Price: Rs 999 / PieceGet Latest Price
ESP8266 10A 220V Network Relay WIFI Module
Model: ESP8266Color: GreenSize(L*W*H):65 x 40 x 18 mmISM: 2.4 GHzPA:+ 25 dBmRelay voltage: 220 VRelay Current: 10 AInput voltage: DC 7 V~30 VInput overvoltage protection: YesInput overcurrent protection: Yes
Features:1.More safe with relays PCB pin anti-climb design.2.With ESP8266 Wifi module,4-layers board design.3.One output status indicator, one input status indicator.4.220V 10A relay, one normally open, one normally closed.5.One way optocoupler isolation input, TVS input protection.6.Access control server via TCP CLIENT mode Via HTTP protocol control.High-current terminals.7.Input overvoltage protection, input with TVS, when voltage exceeds 33V, automatic protection will operate.
Package Included:1 x ESP8266 WIFI Module
Note:Manual measuring, please allow 1 ~ 5 mm error,thank you.
Request
Callback


Additional Information:

  • Item Code: ESP12ERM
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

ESP8266-01 5V Wifi Relay Module TOI APP Controlled

ESP8266-01 5V Wifi Relay Module TOI APP Controlled
  • ESP8266-01 5V Wifi Relay Module TOI APP Controlled
Get Best Quote
Approx. Price: Rs 950 / PieceGet Latest Price
FeaturesOnboard ModuleESP8266 WIFI Module,can connect 5 client at the same time on the mode of APWorking MethodMobile phone equipped with Wifi moduleMobile phone and wifi module equipped with one router,and control the relay by APPOnboard Relay5V,10A/250V AC 10A/30V DC relay
Package Including1pcs ESP8266 5V Wifi Relay Module TOI APP Controled for Smart Home Automation
Request
Callback


Additional Information:

  • Item Code: ESP01RM
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

RFID Key Tag

RFID Key Tag
  • RFID Key Tag
Get Best Quote
Approx. Price: Rs 85 / PieceGet Latest Price
RFID Key Tag / Keyfob / Keychain 13.56MHz - RF Proximity Sensor
Description:
Storage Capacity : 8Kbit,
16 partitions, each partition with 2 group pass words
Size : 30 * 40 * 3mmOperating
Frequency Available : 13.56 Mhz & 125 Khz
Communication speed : 106K
Boud Read and write distance : 2.5 to 10cm
Read and write time : 1 to 2 milli-seconds
Operating Temperature : -20° to 85°Endurance : >100,000 times

Features
• Works with most common RFID Card Reader (Serial and USB)
• RoHS Compliant
• Keychain tag for attachment

Typical applications:
enterprise / campus card, bus stored value card, express way fees, parking, district management,attendance systems, patrol system, enterprise systems, access control systems, radio frequency identification field and so on.
Package List:
1x RFID IC Key Tags Keyfobs Token NFC TAG Keychain 13.56MHz
Request
Callback


Additional Information:

  • Item Code: RFTG1356
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

125 KHz RFID Tag Key Fob Keyfobs

125 KHz RFID Tag Key Fob Keyfobs
  • 125 KHz RFID Tag Key Fob Keyfobs
Get Best Quote
Approx. Price: Rs 85 / PieceGet Latest Price
RFID Key Tag / Keyfob / Keychain 13.56MHz - RF Proximity Sensor
Description:
Storage Capacity : 8Kbit, 16 partitions, each partition with 2 grounp pass words
Size   : 30 * 40 * 3mmOperating Frequency : 13.56 MHz Communication speed : 106K BoudRead and write distance : 2.5 to 10cmRead and write time : 1 to 2 milli-secondsOperating Temperature : -20° to 85°Endurance  : >100,000 times

Features
• Works with most common RFID Card Reader (Serial and USB)
• RoHS Compliant
• Keychain tag for attachment

Typical applications:
enterprise / campus card, bus stored value card, express way fees, parking, district management,attendance systems, patrol system, enterprise systems, access control systems, radio frequency identification field and so on.
Package List:
1x RFID IC Key Tags Keyfobs Token NFC TAG Keychain 13.56MHz
Request
Callback


Additional Information:

  • Item Code: RFTG125K
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

GSM Magnetic 6 dBi Antenna SMA 900/1800MHz

GSM Magnetic 6 dBi Antenna SMA 900/1800MHz
  • GSM Magnetic 6 dBi Antenna SMA 900/1800MHz
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price
GSM antenna designed for GSM & GPRS at 900 (i.e. 800 MHz To 960 MHz) as well as 1800 (1780 -1930 MHz) band of communication terminal system. It's structure is compact and convenient for easy installation. Majorly used in GSM repeater, GSM sensor, GSM module & GSM modems. Also widely used in UV5R/Plus, UV5RA/Plus, UV5RE/Plus, UV5RB, UV5RC, UV5RD, UV3RPlus, BF-320, BF-480, BF-490, BF-520, BF-V6, BF-V8 etc.
Electronic specifications:Frequency Range-800MHz-960MHz-1780MHz-1930MHzfor V.S.W.R ≤ 2.0 Gain-dBi 6.0Polarization Vertical Impedance- Ω 50Maximum Input Power-W 10
Mechanical specifications:
Connector SMA male3 Meter Wire LengthRadome material MetalRadome color blackOperation Temperature- -30~60Humidity-% 5~95Magnetic Base.
Request
Callback


Additional Information:

  • Item Code: GSM6DBI
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

HC-12 433 SI4463 Wireless Serial Module 1000M With Antenna

HC-12 433 SI4463 Wireless Serial Module 1000M With Antenna
  • HC-12 433 SI4463 Wireless Serial Module 1000M With Antenna
Get Best Quote
Approx. Price: Rs 425 / PieceGet Latest Price
HC-12 433 SI4463 Wireless Serial Module Remote 1000M With Antenna
Note: HC-11 cannot communicate with the HC-12, they work independently, in pairs
Features:
Supply voltage: 3.2V~5.5V. (If the module you want to work long hours in the emission state, it is recommended that when the supply voltage exceeds 4.5V threaded a 1N4007 diode to prevent module built-in LDO heated)Default address range (open field test): About 600m (maximum communication distance adjustable reach 1000m, the baud rate is 5000bps)Default idle current: 16MA (In different working modes operating current is different)Module dimensions: 27.8 x 14.4 x 4mmOperating frequency range: 433.4-473.0MHz, up to 100 channels of communicationThe maximum transmit power: 100mW (settable)Module support software upgradeDefault factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
Request
Callback


Additional Information:

  • Item Code: HC12433
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

ESP-WROOM-32 universal WiFi-BT-BLE MCU Module

ESP-WROOM-32 universal WiFi-BT-BLE MCU Module
  • ESP-WROOM-32 universal WiFi-BT-BLE MCU Module
Get Best Quote
Approx. Price: Rs 625 / PieceGet Latest Price
ESP-WROOM-32 is a powerful universal WiFi-BT-BLE MCU module for a variety of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding.
Specifications
ESP32-WROOM-32 contains two low-power Xtensa 32-bit LX6 microprocessors448 KBytes ROM for booting and core functions520 KBytes on-chip SRAM8 KBytes SRAM in RTC SLOW8 KBytes SRAM in RTC FAST1 Kbit of EFUSE, 256 bits MACWiFi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)Bluetooth v4.2 BR/EDR and BLE specification Wi-Fi mode Station/softAP/SoftAP+station/P2PSecurity WPA/WPA2/WPA2-Enterprise/WPS Encryption AES/RSA/ECC/SHAIPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT Interfaces: SD-card, UART,SPI,SDIO,I2C,LED PWM,Motor PWM,I2S ,IR,GPIO, capacities touch sensor, ADC, DAC, Hall sensor, temperature sensor Operating temperature -40 + 85COperating voltage: 2.2-3.6VConsumption: 80 mA typ Dimensions: 18 mm(L) x 25.5 mm(W) x 2.8 mm(H)Pin pietch:1.27mmShielding can height: 2 mmPCB thickness: 0.8±0.1mm
Request
Callback


Additional Information:

  • Item Code: ESP32MOD
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

A6 GSM GPRS Module

A6 GSM GPRS Module
  • A6 GSM GPRS Module
Get Best Quote
Approx. Price: Rs 699 / PieceGet Latest Price
GPRS module GSM module A6 \ SMS \ Speech \ board \ wireless data transmission adapter plate
A6 Quad-band GPRS/GSM module, is one of the smallest cutting-edge products in the world.It adopts LCC package technology and offers the highest reliability and robustness.Depending on the ultra tiny configuration of 22.8×16.8×2.5mm and easier soldering process, it is capable of being embedded in almost all customer applications.Featuring an industrial-standard interface, A6 delivers GSM/GPRS performance for SMS, Data and Voice with extremely low power consumption and extended temperature.Extraordinarily compact size and integrated protocols ensure A6 easily meet the requirements of all M2M applications, including VTS, Industrial PDA, Personal Tracking,Wireless POS, Smart Metering and many other M2M applications. Features:Dimensions 22.8 × 16.8 × 2.5mmWorking temperature -30  to + 80 Working voltage 3.3V-4.2VPower voltage> 3.4VStandby average current 3ma lessSupport GSM / GPRS quad-band, including 850,900,1800,1900MHZSupport China Mobile and China Unicom's 2G GSM network worldwideGPRS Class 10Sensitivity <-105;Support voice callsSupport SMS text messagingSupport GPRS data traffic, the maximum data rate, download 85.6Kbps, upload 42.8KbpsSupports standard GSM07.07,07.05 AT commands and extended commands Ai-ThinkerSupports two serial ports, one serial port to download an AT command portAT command supports the standard AT and TCP / IP command interfaceSupport digital audio and analog audio support HR, FR, EFR, AMR speech codingSMT 42PIN 
Package Included:1 X A6 GPRS GSM Module Adatper Plate1x antenna
Request
Callback


Additional Information:

  • Item Code: A6MOD
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested

NFC Sticker Tags

NFC Sticker Tags
  • NFC Sticker Tags
Get Best Quote
Approx. Price: Rs 10 / PieceGet Latest Price
Description :
Chip: Ntag 213. Physical capacity: 180 bytes. Usable capacity: 144 bytes. Protocol: ISO14443A. Working frequency: 13.56 MHZ. Reading and writing distance: 1 to 5 cm. Reading and writing time: 1 to 2 ms. Working temperature: -20 to 55 degree, humidity of 90%. Erase times : > 100000 times. Data storage: > 10 years. Reading time: 100000 times. Diameter: 25mm. Packaging materials: PE self-adhesive + coated paper.
Compatibility: Support 13.56mhz RFID and NFC IC reader/writer, For example:Acr122u reader/writer. Support Smart mobile phones with NFC function. Brand Smart phone: Sony, HTC, Samsung, Nokia, LG include blackberry,Nokia Lumia, Nexus4/10,Galaxy S4,and other mobile phone could support NFC function. Andriod system Phone could download the NFC software, such as the Google play NFC Task Launcher, NFC ReTag Pro Security Software.
Application: Check in, mobile payment, product information query, mobile identification, mobile marketing, social networking, business card sharing, access control, membership management, posters, healthcare,book borrowing etc.
Request
Callback


Additional Information:

  • Item Code: BE0058
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
X

Explore more products



Reach Us
Sahib Chandock (Sales Head)
Block 13-B & C, Shamrao Vithal Marg, Off Lamington Road Grant Road East, Opposite Shamrao Vithal Post Office
Mumbai- 400007, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS